DVD Creator Not Working

[DeDe]

Attempted to concatenate the same six .mp4 files to DVD as repoted previously for v8.1.5.4 Qt Beta.

• First .mp4 file appears to copy to DVD folder.
• Second .mp4 file - fps decreases from about 27 to nothing then disappears; Time remaining counter zeroes out.
• Task time counters (second file) kept counting until user cancellation.
• Percent copied counter for second file quits at 2.21%.
• Nothing copied beyond first .mp4 file.

Here's the log:

DVDFab 8.1.5.5 (2012/01/16 07:14:36)

0m 11.96s: Qt Translator file load success
0m 20.46s: Load config successful.
0m 41.82s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 43.04s: Config ExBar successful.
0m 48.43s: Config work ui controls successful.
0m 23.43s: Init burn engine successful.
0m 23.54s: StartNotify successful.
0m 23.18s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 32.20s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 38.76s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 44.03s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 46.34s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 06.73s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 02.06s:


------ begin mobile work(1/6) ------


0m 02.07s: create config(3)
0m 02.07s: info: convert profile(vob.passthrough)
0m 02.07s: info: file (.mp4),3D(0)
0m 02.07s: info: streams((0.2)(1.2))
0m 02.14s: info: set output video frame_rate(30000/1001)
0m 28.39s: audio_encode finish job
0m 47.57s:


------ finish mobile work ------


0m 57.04s:


------ begin mobile work(2/6) ------


0m 57.07s: create config(3)
0m 57.14s: info: convert profile(vob.passthrough)
0m 59.29s: info: file (.mp4),3D(0)
0m 59.29s: info: streams((0.2)(1.2))
0m 06.68s: info: set output video frame_rate(30000/1001)
0m 30.28s: ------ cancel all mobile work -------

[signals]

DeDe

Please try v8.1.5.6 with a couple of the problem conversions to see if there is any improvement. No need to start a new thread, just add them to this one.

[DeDe]

v8.1.5.6 Qt Test

Attempted to concatenate the same six .mp4 files to DVD as reported previously for v8.1.5.4 and v8.1.5.5 Qt Beta.

The results were virtually the same.

Here's the log.

DVDFab 8.1.5.6 (2012/01/18 07:34:13)

0m 02.25s: Qt Translator file load success
0m 02.96s: Load config successful.
0m 03.50s: Init profile data driver sucessful.
0m 24.73s: Init GPU settings sucessful.
0m 24.73s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 24.75s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 25.85s: Config ExBar successful.
0m 25.85s: dvd2dvd have 8 elements.
0m 26.18s: dvd2mobile have 28 elements.
0m 27.85s: blu-ray2blu-ray have 4 elements.
0m 27.93s: blu-ray2mobile have 17 elements.
0m 28.98s: blu-ray23d have 7 elements.
0m 29.31s: blu-ray2dvd have 1 elements.
0m 29.37s: file2mobile have 27 elements.
0m 30.95s: file2dvd have 1 elements.
0m 31.00s: file2bluray have 1 elements.
0m 31.75s: Config work ui controls successful.
0m 13.75s: Init burn engine successful.
0m 13.84s: StartNotify successful.
0m 16.98s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 18.71s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 21.48s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 24.60s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 26.76s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 43.96s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 34.12s:


------ begin mobile work(1/6) ------


0m 34.14s: create config(3)
0m 34.14s: info: convert profile(vob.passthrough)
0m 34.14s: info: file (.mp4),3D(0)
0m 34.14s: info: streams((0.2)(1.2))
0m 34.20s: info: set output video frame_rate(30000/1001)
0m 04.64s: audio_encode finish job
0m 23.71s:


------ finish mobile work ------


0m 31.57s:


------ begin mobile work(2/6) ------


0m 31.59s: create config(3)
0m 31.62s: info: convert profile(vob.passthrough)
0m 32.26s: info: file (.mp4),3D(0)
0m 32.26s: info: streams((0.2)(1.2))
0m 36.18s: info: set output video frame_rate(30000/1001)
0m 19.89s: ------ cancel all mobile work -------

[DeDe]

v8.1.5.8 Qt Test

Again, similar results to my previous tests with the same six .mp4 input files.

Here's the log:

DVDFab 8.1.5.8 (2012/01/18 14:50:23)

0m 01.64s: Qt Translator file load success
0m 02.50s: Load config successful.
0m 02.84s: Init profile data driver sucessful.
0m 14.43s: Init GPU settings sucessful.
0m 14.43s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 14.45s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 16.50s: Config ExBar successful.
0m 16.50s: dvd2dvd have 8 elements.
0m 16.82s: dvd2mobile have 28 elements.
0m 18.40s: blu-ray2blu-ray have 4 elements.
0m 18.46s: blu-ray2mobile have 17 elements.
0m 19.40s: blu-ray23d have 7 elements.
0m 19.73s: blu-ray2dvd have 1 elements.
0m 19.78s: file2mobile have 27 elements.
0m 21.34s: file2dvd have 1 elements.
0m 21.37s: file2bluray have 1 elements.
0m 22.14s: Config work ui controls successful.
0m 43.92s: Init burn engine successful.
0m 44.00s: StartNotify successful.
0m 02.71s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 04.40s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 07.65s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 11.00s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 12.78s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 35.32s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 25.95s:


------ begin mobile work(1/6) ------


0m 25.96s: create config(3)
0m 25.96s: info: convert profile(vob.passthrough)
0m 25.96s: info: file (.mp4),3D(0)
0m 25.96s: info: streams((0.2)(1.2))
0m 26.03s: info: set output video frame_rate(30000/1001)
0m 00.15s: audio_encode finish job
0m 56.54s:


------ finish mobile work ------


0m 04.70s:


------ begin mobile work(2/6) ------


0m 04.73s: create config(3)
0m 04.76s: info: convert profile(vob.passthrough)
0m 04.96s: info: file (.mp4),3D(0)
0m 04.96s: info: streams((0.2)(1.2))
0m 09.03s: info: set output video frame_rate(30000/1001)
0m 24.92s: ------ cancel all mobile work -------

[DeDe]

v8.1.5.9 Qt Test

Similar results to each of my previous tests with the same six .mp4 input files.
Achieved a greater maximum fps today of about 30. Still, nothing converts beyond the first .mp4 file.

DVDFab 8.1.5.9 (2012/01/20 14:28:29)

0m 13.64s: Qt Translator file load success


DVDFab 8.1.5.9 (2012/01/20 14:29:53)

0m 01.87s: Qt Translator file load success
0m 02.85s: Load config successful.
0m 03.21s: Init profile data driver sucessful.
0m 23.06s: Init GPU settings sucessful.
0m 23.06s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 23.15s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 24.21s: Config ExBar successful.
0m 24.21s: dvd2dvd have 8 elements.
0m 24.56s: dvd2mobile have 28 elements.
0m 26.25s: blu-ray2blu-ray have 4 elements.
0m 26.32s: blu-ray2mobile have 17 elements.
0m 27.43s: blu-ray23d have 7 elements.
0m 27.87s: blu-ray2dvd have 1 elements.
0m 27.95s: file2mobile have 27 elements.
0m 29.57s: file2dvd have 1 elements.
0m 29.62s: file2bluray have 1 elements.
0m 30.37s: Config work ui controls successful.
0m 41.54s: Init burn engine successful.
0m 41.71s: StartNotify successful.
0m 33.70s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 44.10s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 48.26s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 51.57s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 53.35s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 05.79s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 32.78s:


------ begin mobile work(1/6) ------


0m 32.79s: create config(3)
0m 32.79s: info: convert profile(vob.passthrough)
0m 32.79s: info: file (.mp4),3D(0)
0m 32.79s: info: streams((0.2)(1.2))
0m 32.92s: info: set output video frame_rate(30000/1001)
0m 36.95s: audio_encode finish job
0m 52.56s:


------ finish mobile work ------


0m 58.06s:


------ begin mobile work(2/6) ------


0m 58.07s: create config(3)
0m 58.14s: info: convert profile(vob.passthrough)
0m 58.25s: info: file (.mp4),3D(0)
0m 58.25s: info: streams((0.2)(1.2))
0m 00.29s: info: set output video frame_rate(30000/1001)
0m 21.29s: ------ cancel all mobile work -------

[DeDe]

DVDFab 8.1.6.0 Qt Test

Similar results to each of my previous tests with the same six .mp4 input files.

DVDFab 8.1.6.0 (2012/02/01 18:08:05)

0m 18.71s: Qt Translator file load success


DVDFab 8.1.6.0 (2012/02/01 18:08:32)

0m 01.67s: Qt Translator file load success
0m 02.21s: Load config successful.
0m 02.62s: Init profile data driver sucessful.
0m 20.82s: Init GPU settings sucessful.
0m 20.82s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 20.87s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 22.03s: Config ExBar successful.
0m 22.03s: dvd2dvd have 8 elements.
0m 22.54s: dvd2mobile have 28 elements.
0m 24.57s: blu-ray2blu-ray have 4 elements.
0m 24.68s: blu-ray2mobile have 17 elements.
0m 25.84s: blu-ray23d have 7 elements.
0m 26.17s: blu-ray2dvd have 1 elements.
0m 26.23s: file2mobile have 27 elements.
0m 27.79s: file2dvd have 1 elements.
0m 27.84s: file2bluray have 1 elements.
0m 28.59s: Config work ui controls successful.
0m 53.18s: Init burn engine successful.
0m 53.26s: StartNotify successful.
0m 10.84s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 21.25s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 36.85s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 41.42s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 45.92s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 00.26s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 40.35s:


------ begin mobile work(1/6) ------


0m 40.39s: create config(3)
0m 40.39s: info: convert profile(vob.passthrough)
0m 40.39s: info: file (.mp4),3D(0)
0m 40.39s: info: streams((0.2)(1.2))
0m 40.45s: info: set output video frame_rate(30000/1001)
0m 45.46s: audio_encode finish job
0m 15.29s:


------ finish mobile work ------


0m 29.71s:


------ begin mobile work(2/6) ------


0m 29.93s: create config(3)
0m 30.95s: info: convert profile(vob.passthrough)
0m 33.90s: info: file (.mp4),3D(0)
0m 33.92s: info: streams((0.2)(1.2))
0m 48.81s: info: set output video frame_rate(30000/1001)
0m 49.23s: ------ cancel all mobile work -------

[DeDe]

DVDFab 8.1.6.1 Qt Test

Got a little further this time. User cancelled on file 3 when stuck at 2.21% copied and fps rate counter disappeared. Time remaining counter zeroed out.

Internal Log:

DVDFab 8.1.6.1 (2012/02/05 16:17:25)

0m 44.07s: Qt Translator file load success


DVDFab 8.1.6.1 (2012/02/05 16:19:51)

0m 18.81s: Qt Translator file load success
0m 25.32s: Load config successful.
0m 26.03s: Init profile data driver sucessful.
0m 07.25s: Init GPU settings sucessful.
0m 07.25s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 07.25s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 10.64s: Config ExBar successful.
0m 10.64s: dvd2dvd have 8 elements.
0m 11.04s: dvd2mobile have 28 elements.
0m 12.67s: blu-ray2blu-ray have 4 elements.
0m 12.73s: blu-ray2mobile have 17 elements.
0m 13.68s: blu-ray23d have 7 elements.
0m 14.03s: blu-ray2dvd have 1 elements.
0m 14.09s: file2mobile have 27 elements.
0m 15.71s: file2dvd have 1 elements.
0m 15.76s: file2bluray have 1 elements.
0m 16.56s: Config work ui controls successful.
0m 38.48s: Init burn engine successful.
0m 39.15s: StartNotify successful.
0m 33.68s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 19.65s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 44.34s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 06.10s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 45.07s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 57.17s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 37.48s:


------ begin mobile work(1/6) ------


0m 37.51s: create config(3)
0m 37.51s: info: convert profile(vob.passthrough)
0m 37.51s: info: file (.mp4),3D(0)
0m 37.51s: info: streams((0.2)(1.2))
0m 37.87s: info: set output video frame_rate(30000/1001)
0m 05.32s: audio_encode finish job
0m 56.04s:


------ finish mobile work ------


0m 12.18s:


------ begin mobile work(2/6) ------


0m 12.35s: create config(3)
0m 13.51s: info: convert profile(vob.passthrough)
0m 17.12s: info: file (.mp4),3D(0)
0m 17.12s: info: streams((0.2)(1.2))
0m 39.70s: info: set output video frame_rate(30000/1001)
0m 38.84s: audio_encode finish job
0m 47.45s:


------ finish mobile work ------


0m 03.04s:


------ begin mobile work(3/6) ------


0m 03.07s: create config(3)
0m 03.21s: info: convert profile(vob.passthrough)
0m 03.76s: info: file (.mp4),3D(0)
0m 03.76s: info: streams((0.2)(1.2))
0m 09.79s: info: set output video frame_rate(30000/1001)
0m 53.39s: ------ cancel all mobile work -------

[terry5]

Hi DeDe,
Please use the third mp4 file to create DVD separately and then feed back. If it fails, post the info of the source file using mediainfo. Thanks.

[DeDe]

Hi DeDe,
Please use the third mp4 file to create DVD separately and then feed back. If it fails, post the info of the source file using mediainfo. Thanks.

I used the third file alone and it worked. The job ended successfully.

Seems to handle single files OK, but doesn't like a stack very much...

[DeDe]

DVDFab 8.1.6.2 Qt Test

Using same six .mp4 files as previously. Same order. Back to freezing on second .mp4 file. Get 2.21% copied with fps rate counter disappearing. Time remaining counter zeroes out. Time elapsed counters continue counting.

DVDFab 8.1.6.2 (2012/02/10 11:47:48)

0m 16.39s: Qt Translator file load success


DVDFab 8.1.6.2 (2012/02/10 12:36:56)

0m 42.35s: Qt Translator file load success
0m 46.56s: Load config successful.
0m 52.92s: Init profile data driver sucessful.
0m 48.48s: Init GPU settings sucessful.
0m 48.48s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 48.48s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 49.32s: Config ExBar successful.
0m 49.32s: dvd2dvd have 8 elements.
0m 49.67s: dvd2mobile have 28 elements.
0m 51.25s: blu-ray2blu-ray have 4 elements.
0m 51.31s: blu-ray2mobile have 17 elements.
0m 52.23s: blu-ray23d have 7 elements.
0m 52.56s: blu-ray2dvd have 1 elements.
0m 52.62s: file2mobile have 27 elements.
0m 54.21s: file2dvd have 1 elements.
0m 54.26s: file2bluray have 1 elements.
0m 54.98s: Config work ui controls successful.
0m 34.71s: Init burn engine successful.
0m 34.82s: StartNotify successful.
0m 00.56s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 02.29s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 05.28s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 08.67s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 10.37s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 22.42s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 46.50s:


------ begin mobile work(1/6) ------


0m 46.50s: create config(3)
0m 46.50s: info: convert profile(vob.passthrough)
0m 46.50s: info: file (.mp4),3D(0)
0m 46.50s: info: streams((0.2)(1.2))
0m 46.54s: info: set output video frame_rate(30000/1001)
0m 14.31s: audio_encode finish job
0m 53.79s:


------ finish mobile work ------


0m 03.64s:


------ begin mobile work(2/6) ------


0m 03.70s: create config(3)
0m 03.96s: info: convert profile(vob.passthrough)
0m 04.85s: info: file (.mp4),3D(0)
0m 04.85s: info: streams((0.2)(1.2))
0m 10.04s: info: set output video frame_rate(30000/1001)
0m 55.95s: ------ cancel all mobile work -------

[DeDe]

DVDFab 8.1.6.3 Qt Test

Same 6 input files. User cancelled on third .mp4 file when fps rate counter went away and time remaining counter zeroed out. Percent copied plateaued at 2.21%.

Internal log:

DVDFab 8.1.6.3 (2012/02/12 09:05:57)

0m 07.82s: Qt Translator file load success


DVDFab 8.1.6.3 (2012/02/12 09:06:10)

0m 01.35s: Qt Translator file load success
0m 02.12s: Load config successful.
0m 02.28s: Init profile data driver sucessful.
0m 11.96s: Init GPU settings sucessful.
0m 11.96s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 11.98s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 13.57s: Config ExBar successful.
0m 13.57s: dvd2dvd have 8 elements.
0m 13.90s: dvd2mobile have 28 elements.
0m 15.42s: blu-ray2blu-ray have 4 elements.
0m 15.48s: blu-ray2mobile have 17 elements.
0m 16.39s: blu-ray23d have 7 elements.
0m 16.70s: blu-ray2dvd have 1 elements.
0m 16.76s: file2mobile have 27 elements.
0m 18.25s: file2dvd have 1 elements.
0m 18.29s: file2bluray have 1 elements.
0m 19.03s: Config work ui controls successful.
0m 36.42s: Init burn engine successful.
0m 36.54s: StartNotify successful.
0m 09.98s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 12.04s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 15.67s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 19.71s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 21.57s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 33.93s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 16.17s:


------ begin mobile work(1/6) ------


0m 16.17s: create config(3)
0m 16.18s: info: convert profile(vob.passthrough)
0m 16.18s: info: file (.mp4),3D(0)
0m 16.18s: info: streams((0.2)(1.2))
0m 16.32s: info: set output video frame_rate(30000/1001)
0m 14.00s: audio_encode finish job
0m 26.60s:


------ finish mobile work ------


0m 29.75s:


------ begin mobile work(2/6) ------


0m 29.76s: create config(3)
0m 29.78s: info: convert profile(vob.passthrough)
0m 30.00s: info: file (.mp4),3D(0)
0m 30.00s: info: streams((0.2)(1.2))
0m 31.68s: info: set output video frame_rate(30000/1001)
0m 16.92s: audio_encode finish job
0m 33.32s:


------ finish mobile work ------


0m 41.03s:


------ begin mobile work(3/6) ------


0m 41.03s: create config(3)
0m 41.15s: info: convert profile(vob.passthrough)
0m 41.46s: info: file (.mp4),3D(0)
0m 41.46s: info: streams((0.2)(1.2))
0m 44.25s: info: set output video frame_rate(30000/1001)
0m 37.01s: ------ cancel all mobile work -------

[AllNight]

Sorry to see all the time and effort you are putting into this DeDe with no fix yet. Hope they get it working for you! :\

[DeDe]

DVDFab 8.1.6.5 Qt Test

Same 6 input files. User cancelled on second .mp4 file when fps rate counter went away and time remaining counter zeroed out. Percent copied stopped at 2.21%.

Internal log follows:

DVDFab 8.1.6.5 (2012/03/07 12:13:20)

0m 10.10s: Qt Translator file load success
0m 14.64s: Load config successful.
0m 14.78s: Init profile data driver sucessful.
0m 34.59s: Init GPU settings sucessful.
0m 34.59s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 34.60s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 36.40s: Config ExBar successful.
0m 36.40s: dvd2dvd have 8 elements.
0m 36.78s: dvd2mobile have 28 elements.
0m 38.39s: blu-ray2blu-ray have 4 elements.
0m 38.46s: blu-ray2mobile have 17 elements.
0m 39.42s: blu-ray23d have 7 elements.
0m 39.78s: blu-ray2dvd have 1 elements.
0m 39.82s: file2mobile have 27 elements.
0m 41.42s: file2dvd have 1 elements.
0m 41.46s: file2bluray have 1 elements.
0m 42.23s: Config work ui controls successful.
0m 53.65s: Init burn engine successful.
0m 54.98s: StartNotify successful.
0m 13.57s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 36.35s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 55.51s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 59.18s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 00.93s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 13.71s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 15.71s:


------ begin mobile work(1/6) ------


0m 15.71s: create config(3)
0m 15.71s: info: convert profile(vob.passthrough)
0m 15.73s: info: file (.mp4),3D(0)
0m 15.73s: info: streams((0.2)(1.2))
0m 15.78s: info: set output video frame_rate(30000/1001)
0m 27.96s: audio_encode finish job
0m 36.20s:


------ finish mobile work ------


0m 40.28s:


------ begin mobile work(2/6) ------


0m 40.28s: create config(3)
0m 40.51s: info: convert profile(vob.passthrough)
0m 41.18s: info: file (.mp4),3D(0)
0m 41.18s: info: streams((0.2)(1.2))
0m 43.45s: info: set output video frame_rate(30000/1001)
0m 27.68s: ------ cancel all mobile work -------

[DeDe]

DVDFab 8.1.6.7 Qt Beta Test

Same 6 input files. User cancelled on second .mp4 file when fps rate counter went away and time remaining counter zeroed out. Percent copied stopped at 2.21%.

Internal log follows:

DVDFab 8.1.6.7 (2012/03/14 15:45:07)

0m 09.07s: GPUAccelerate: 0
0m 09.07s: CUDA cap: 0
0m 09.07s: Support coreavc decode: 0
0m 09.07s: Graphics info: ATI RADEON Xpress 200 Series : :
0m 09.12s: Qt Translator file load success


DVDFab 8.1.6.7 (2012/03/14 15:45:19)

0m 01.32s: GPUAccelerate: 0
0m 01.32s: CUDA cap: 0
0m 01.32s: Support coreavc decode: 0
0m 01.32s: Graphics info: ATI RADEON Xpress 200 Series : :
0m 01.32s: Qt Translator file load success
0m 02.28s: Load config successful.
0m 02.65s: Init profile data driver sucessful.
0m 13.35s: Init GPU settings sucessful.
0m 13.35s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 13.35s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 14.17s: Config ExBar successful.
0m 14.17s: dvd2dvd have 8 elements.
0m 14.56s: dvd2mobile have 29 elements.
0m 16.28s: blu-ray2blu-ray have 4 elements.
0m 16.35s: blu-ray2mobile have 18 elements.
0m 17.42s: blu-ray23d have 7 elements.
0m 17.75s: blu-ray2dvd have 1 elements.
0m 17.81s: file2mobile have 28 elements.
0m 19.46s: file2dvd have 1 elements.
0m 19.51s: file2bluray have 1 elements.
0m 20.32s: Config work ui controls successful.
0m 30.81s: Init burn engine successful.
0m 30.95s: StartNotify successful.
0m 47.40s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 49.12s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 52.92s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 56.67s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 58.54s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 11.76s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 27.87s:


------ begin mobile work(1/6) ------


0m 27.89s: create config(3)
0m 27.89s: info: convert profile(vob.passthrough)
0m 27.89s: info: file (.mp4),3D(0)
0m 27.89s: info: streams((0.2)(1.2))
0m 28.04s: info: set output video frame_rate(30000/1001)
0m 32.09s: audio_encode finish job
0m 39.37s:


------ finish mobile work ------


0m 44.00s:


------ begin mobile work(2/6) ------


0m 44.10s: create config(3)
0m 44.92s: info: convert profile(vob.passthrough)
0m 46.18s: info: file (.mp4),3D(0)
0m 46.18s: info: streams((0.2)(1.2))
0m 52.73s: info: set output video frame_rate(30000/1001)
0m 59.20s: ------ cancel all mobile work -------

[DeDe]

DVDFab 8.1.6.8 Qt Test

Same 6 input files as used previously.

• Fps rate counter zeroes out.
• Task time left counter zeros out.
• Only 4.76% of first file copied. Video_TS file contains 21.3 MB.
• Elapsed time counters continued counting until user cancelled on first file.

Log:

DVDFab 8.1.6.8 (2012/03/21 14:42:21)

0m 32.35s: GPUAccelerate: 0
0m 32.35s: CUDA cap: 0
0m 32.35s: Support coreavc decode: 0
0m 32.35s: Graphics info: ATI RADEON Xpress 200 Series : :
0m 32.82s: Qt Translator file load success
0m 40.59s: Load config successful.
0m 41.03s: Init profile data driver sucessful.
0m 13.31s: Init GPU settings sucessful.
0m 13.31s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 13.39s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 14.65s: Config ExBar successful.
0m 14.65s: dvd2dvd have 8 elements.
0m 15.34s: dvd2mobile have 29 elements.
0m 17.56s: blu-ray2blu-ray have 4 elements.
0m 17.62s: blu-ray2mobile have 18 elements.
0m 18.76s: blu-ray23d have 7 elements.
0m 19.17s: blu-ray2dvd have 1 elements.
0m 19.31s: file2mobile have 28 elements.
0m 21.14s: file2dvd have 1 elements.
0m 21.18s: file2bluray have 1 elements.
0m 22.06s: Config work ui controls successful.
0m 55.62s: Init burn engine successful.
0m 55.70s: StartNotify successful.
0m 32.96s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 02.84s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 06.78s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 19.20s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 22.84s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 44.89s: 513.05 : video codec(28,828601953) try to connect inter-codec failed
0m 36.45s:


------ begin mobile work(1/6) ------


0m 36.51s: create config(3)
0m 36.51s: info: convert profile(vob.passthrough)
0m 36.51s: info: file (.mp4),3D(0)
0m 36.51s: info: streams((0.2)(1.2))
0m 36.56s: info: set output video frame_rate(30000/1001)
0m 30.93s: ------ cancel all mobile work -------