Copy Problems With DVDFab

[DizzyDaft]

My System State:
OS: Windows 7 Ultimate SP1 x64 (6.1.7601.17567)
Processor: Intel(R) Core(TM) i7
Memory: 4x2GB RAM Kingston Hyper X 1600Mhz DDR3 (total of 8GB)
Video Card: Asus GeForce GTX 480 1536MB PCI-Express HDMI (Fermi)
Hard Drive(s): 2x Samsung 1TB SATA2 | 1x Samsung 1.5TB SATA2 | 1x WD 360GB SATA2 | 2x WD 1TB SATA3
Optical Drive 1: PLEXTOR BDDVDR PX-B320SA firmware v1.05
Optical Drive 2: PLEXTOR BD-R/RW PX-LB950SA firmware v1.02

DVDFab v8.1.0.0
Copying Outcasts [UPC=5051561001567] UK, Region: B
BD50=> BD25 Full Disc (total of 2 disc's)

Nothing Happens starts copying Just stops dead, no error, no crash's left it to see anything happens 2 days later still nothing i check destination folder it had copied the folder structure except for stream folder
______|

Copying Stargate Universe (SGU) Complete Season 1 [UPC=5039036044660] UK, Region: A,B
BD50=> BD25 Full Disc (total of 5 disc's)

Nothing Happens starts copying Just stops dead @ 6.01%, no error, no crash's left it to see anything happens 1 day later still nothing so i do next disc wont even go to 1%
______|

I tried everything Even rested dma nothing so i tried a dvd it copied a perfect copy from DVD9 to DVD5 no problems

i tried downgrading dvdfab from 8.1.0.0 => 8.0.9.5 still as above
so i uninstalled the lot installed 8.0.8.8

copied Otcasts BD Disc 1 Perfect

not tested SGU as of yet but i will update this post when i have

[Gummigutta]

DVDFab v8.1.0.1 is out.

[DizzyDaft]

thanx i should of checked that out before posting
i shell check that 1 out see if that works

[DizzyDaft]

No Good Still The Same.......

installed new version v8.1.0.1

Analyzing Disc ok took little longer than usual


Starting copy process


Still.. Over 1 hour later


Not budged stayed @ 0.00% like i said no crash no error nothing
this is from dvdfab_internal.log

DVDFab 8.1.0.1 (2011/06/26  11:22:06)

 0m 01.10s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
 0m 02.93s: Qt Translator file load success 
 0m 13.96s: detected blu-ray
 0m 13.96s: drive H
 0m 13.96s: blu-ray type 1
 0m 13.96s: volume label OUTCASTS_D2
 0m 15.33s: detected blu-ray
 0m 15.33s: drive H
 0m 15.33s: blu-ray type 1
 0m 15.33s: volume label OUTCASTS_D2
 1m 05.52s: root 02F53AAD        OUTCASTS_D2:OUTCASTS_D2:OUTCASTS_D2:OUTCASTS_D2
 1m 05.94s: aacs 1 bd+ 0
 1m 06.37s: got discinfo
 1m 07.25s: got bdmv
 1m 07.26s: Vendor: PLEXTOR
 1m 07.26s: Product: BDDVDR PX-B320SA
 1m 07.26s: Revision: 1.05
 1m 07.26s: Vendor specific: 2009/10/20 16:11
 1m 07.26s: AACS version: 1
 1m 07.26s: Number of concurrent AGIDs: 2
 1m 07.26s: Supports bus encryption: NO
 1m 07.26s: Supports binding nonce generation: NO
 1m 07.26s: got agid 0
 1m 07.33s: sent host cert chal
 1m 07.33s: got drive cert chal
 1m 07.33s: BEC 0
 1m 07.33s: DRIVE_VENDOR 0x0128
 1m 07.40s: got drive key
 1m 08.09s: got host key signature
 1m 08.09s: verified drive signature
 1m 08.09s: verified host signature
 1m 08.17s: sent host signature and key point
 1m 08.17s: got bus key
 1m 09.57s: got volume id
 1m 09.57s: got volume id mac
 1m 09.57s: volume id is correct
 1m 09.57s: got vid
 1m 09.76s: blu-ray 952ED4EDC1CCB591D35951CB5D784C156AD02825
 1m 10.51s: cert BEE=0x00 same
 1m 11.79s: D E4D9C233
 1m 11.79s: got vuk
 1m 12.19s: got unit key 1
 1m 21.07s: got extended bdinfo
 1m 21.09s: opened blu-ray
11m 33.92s: Blu-ray Copy: Full Disc
11m 33.92s: Source: H:\BDMV\
11m 33.92s: SourceSize: 38282 MB
11m 33.92s: RemoveHDAudio: 0
11m 33.92s: OutputDisc: BDMV
11m 33.92s: OutputTarget: BD25
11m 33.92s: OutputVideo: 1080p/i

no other logs genarated

[Gummigutta]

Are you using the free version of DVDFab?

[DizzyDaft]

registered version

[signals]

Sorry you are having trouble. I am moving your thread to the Blu-ray Copy sub-forum, so that other users and the DVDFab QA team will be able to find it more easliy. Always post problems like this in the correct Software Support area for a quicker response.

[CBR929]

Hi DizzyDaft

Please do not compress from your drive
First save it to your HDD as BD50 without compression.
Then open the hard drive folder and use "Movie Only" mode select BD25 to compress to another folder on your hard drive.
Use the "Write Data" mode of Fab to open this COMPRESSED folder and burn to a disk.
Doing it this way saves wear and tear on your optical drive and is also faster.

If still having problems post your logs the default location is:

For Win7 C:\Users\User Name\My Documents\DVDFab\Log
or Vista C:\Users\User Name\Documents\DVDFab\Log
or for XP C:\Documents and Settings\User Name\My Documents\DVDFab\Log
Please use attachment button and attach your most recent, Internal and Burn log(s) and post right here.

CBR929

[DiabloZoe]

Are you doing any compression? When you first start do you let the disc fully analyze before pressing start? Are you copying to the HDD first?

[DizzyDaft]

ok..

1. i want the exact replica of the Disc (includes, TruHD, Menu's, Extras, ect.)
2. it is TV box sets not single movie
3. its copied to hdd full BD50 (no compression)
4. Fab is then booted up For compression BD50=>BD25 From Hdd to 2nd Hdd as an iso image (so this then can be sent to my eTRAYz Storage for all my xTreamer sidewinders to access) these are not burnt to disc's

my xTreamer sidewinders can play exact image's from iso & BDiso

i am testing it out for the fist time for BD the main reason is for when i get the lord of the rings box set (16 Disc's) no need to get off me parked *** to change disc's

** i could just pack the cloned version to iso but if/at a later date i may need to put them to disc so a can claim space for new stuff then i still would have to Compress them down to a BD25

[DizzyDaft]

Are you doing any compression? When you first start do you let the disc fully analyze before pressing start? Are you copying to the HDD first?

yup disc is fully analyzed before i even think of pressing start

[DizzyDaft]

i uninstalled v8.1.0.1
and installed v8.0.8.8 again



and successfully completed

8.0.9.x series was so buggy for me
8.1.x.x series don't work for me

[DizzyDaft]

ok v8.0.8.8
has completed my tasks i now have all disc's copied to BD25 iso
the new versions i think i will leave for abit and wait till v8.2.0.0 becomes available

[DizzyDaft]

copy the full disc to your HDD ie C:\BDFullCopy\

then select DB Copy => Full Disk
save it as an *.iso to HDD preferably a 2nd Drive ie D:\BDISO\movie.iso


but before you do this make sure that you set up your settings ie..




when you have a complete iso use imgBurn if install just double click the iso
and set your speed to x4 speed i find this better than higher speed's