Cannot Copy "An Affair To Remember"

[murffee1]

I tried backing up "An Affair To Remember" that was just released on Blu-ray. This is the version with Cary Grant. The disc does the initial scan and then closes the program. I tried this with version 8.1.1.5 and also with the new update 8.1.1.6 with the same result. I went back to version 7.0.8.0 and it copied with no problems.

So the issue does not appear to be the disc. I have gone back and forth between version 7 and 8 with the same results using two different Blu-ray players.

Does anybody know what is in version 8 that causes the program to shut down?

Thanks.

[signals]

No, but it would help if you could post any entries from the DVDFab internal log that relate to this title from v7 and v8. Also, complete the crash report form and send it if it pops up after the crash (does not always).

[murffee1]

No, but it would help if you could post any entries from the DVDFab internal log that relate to this title from v7 and v8. Also, complete the crash report form and send it if it pops up after the crash (does not always).

I have attached the log from 8.1.1.6 at the bottom of the message. Version 7 will no longer let me use it(It forces me to upgrade to version 8).

Hopefully, this helps.
Thanks

DVDFab 8.1.1.6 (2011/09/04 18:48:08)

0m 07.37s: Qt Translator file load success
0m 09.29s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 0 bd23d 1 bd2dvd 0 file2mobile 0 filemover 0
0m 23.72s: detected blu-ray
0m 23.72s: drive I
0m 23.72s: blu-ray type 1
0m 23.72s: volume label AN_AFFAIR_TO_REMEMBER
0m 23.85s: aacs 1 bd+ 1
0m 30.99s: got discinfo
0m 31.15s: got bdmv
0m 31.18s: Vendor: PIONEER
0m 31.18s: Product: BD-RW BDR-205
0m 31.18s: Revision: 1.11
0m 31.18s: Vendor specific: 10/12/01 PIONEER
0m 31.18s: AACS version: 1
0m 31.18s: Number of concurrent AGIDs: 1
0m 31.18s: Supports bus encryption: NO
0m 31.18s: Supports binding nonce generation: YES
0m 31.20s: Supports Hybrid discs: NO
0m 31.23s: got agid 0
0m 31.31s: sent host cert chal
0m 31.32s: got drive cert chal
0m 31.32s: BEC 0
0m 31.32s: DRIVE_VENDOR 0x0103
0m 31.37s: got drive key
0m 32.33s: got host key signature
0m 32.33s: verified drive signature
0m 32.33s: verified host signature
0m 32.41s: sent host signature and key point
0m 32.43s: got bus key
0m 32.44s: got agid 0
0m 32.52s: sent host cert chal
0m 32.52s: got drive cert chal
0m 32.54s: BEC 0
0m 32.54s: DRIVE_VENDOR 0x0103
0m 32.58s: got drive key
0m 32.58s: got host key signature
0m 32.60s: verified drive signature
0m 32.60s: verified host signature
0m 32.65s: sent host signature and key point
0m 32.65s: got bus key
0m 33.29s: got volume id
0m 33.29s: got volume id mac
0m 33.29s: volume id is correct
0m 33.29s: got vid
0m 33.44s: blu-ray 3CA3862BB9C8A5B1C296D3510CBD54CB546BF967
0m 34.00s: cert BEE=0x00 same
0m 34.30s: D 4C0D8BF4
0m 37.87s: got vuk

[pennsylvaniaron]

an affair to remember

I too tried backing up this disc and have a different problem. I am using the latest v.8198. dvdfab on all other discs does that initial scanning telling you the size that the compressed file will be. On this disc it says n/a. I am using the bd25/1080i for just the main movie.

After finishing the backup the size of the file is 36GB. For some reason it will not compress the main movie. Any ideas? Regards...

[signals]

Need the DVDFab internal log session from this disc.

[pennsylvaniaron]

Need the DVDFab internal log session from this disc.

I believe this is the log....I see near the bottom of the log it says need not compress, change to copy mode. seems like it just wants to do a copy with no compression???

DVDFab 8.1.9.8 (2012/08/01 00:12:38)

0m 00.65s: GPUAccelerate: 28729
0m 00.65s: CUDA cap: 0
0m 00.65s: Support coreavc decode: 1
0m 00.65s: Graphics info: NVIDIA GeForce 9500 GT : 4.20 : 1.1
0m 00.65s: Qt Translator file load success
0m 00.68s: Load config successful.
0m 00.73s: Init profile data driver sucessful.
0m 02.48s: Init GPU settings sucessful.
0m 02.48s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 02.49s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 02.66s: Config ExBar successful.
0m 02.66s: dvd2dvd have 8 elements.
0m 02.77s: dvd2mobile have 29 elements.
0m 03.41s: blu-ray2blu-ray have 4 elements.
0m 03.43s: blu-ray2mobile have 18 elements.
0m 03.83s: blu-ray23d have 7 elements.
0m 03.96s: blu-ray2dvd have 1 elements.
0m 03.97s: file2mobile have 28 elements.
0m 04.60s: file2dvd have 1 elements.
0m 04.61s: file2bluray have 1 elements.
0m 04.91s: Config work ui controls successful.
0m 18.31s: Init burn engine successful.
0m 18.34s: StartNotify successful.
0m 18.36s: opening drive N
0m 18.37s: got media type 15
0m 18.75s: got max lba 21598431
0m 19.61s: type Blu-ray BDMV
0m 19.61s: volume label AN_AFFAIR_TO_REMEMBER
0m 19.68s: aacs 1 bd+ 1
0m 26.02s: Java protection is removed by StealthyClone anti-protection.
0m 26.22s: got discinfo
0m 26.34s: got bdmv
0m 26.36s: Vendor: PIONEER
0m 26.36s: Product: BD-RW BDR-205
0m 26.38s: Revision: 1.12
0m 26.38s: Vendor specific: 11/06/16 PIONEER
0m 26.38s: AACS version: 1
0m 26.39s: Number of concurrent AGIDs: 1
0m 26.39s: Supports bus encryption: NO
0m 26.39s: Supports binding nonce generation: YES
0m 26.39s: Supports Hybrid discs: NO
0m 26.41s: got agid 0
0m 26.48s: sent host cert chal
0m 26.50s: got drive cert chal
0m 26.50s: BEC 0
0m 26.50s: DRIVE_VENDOR 0x0103
0m 26.55s: got drive key
0m 26.98s: got host key signature
0m 26.98s: verified drive signature
0m 26.98s: verified host signature
0m 27.05s: sent host signature and key point
0m 27.05s: got bus key
0m 27.08s: got agid 0
0m 27.16s: sent host cert chal
0m 27.17s: got drive cert chal
0m 27.19s: BEC 0
0m 27.19s: DRIVE_VENDOR 0x0103
0m 27.25s: got drive key
0m 27.25s: got host key signature
0m 27.26s: verified drive signature
0m 27.26s: verified host signature
0m 27.31s: sent host signature and key point
0m 27.33s: got bus key
0m 27.95s: got volume id
0m 27.95s: got volume id mac
0m 27.97s: volume id is correct
0m 27.97s: got vid
0m 28.12s: blu-ray 3CA3862BB9C8A5B1C296D3510CBD54CB546BF967
0m 28.64s: cert BEE=0x00 same
0m 28.89s: D 4C0D8BF4
0m 32.99s: got vuk
0m 32.99s: got fut
0m 34.99s: got unit key 7
0m 52.96s: got extended bdinfo
0m 52.96s: opened blu-ray
0m 19.34s: Blu-ray Copy: Main Movie
0m 19.34s: Source: N:/BDMV/
0m 19.34s: Playlist: 800
0m 19.34s: Chapters: 1 -> 21
0m 19.34s: TotalSize: 35985 MB
0m 19.34s: SourceSize: 53 MB
0m 19.34s: RemoveHDAudio: 0
0m 19.34s: CompressToAC3: 0
0m 19.34s: OutputSize: 23000 MB
0m 19.34s: OutputDisc: BDMV
0m 19.34s: OutputTarget: BD25
0m 19.35s: OutputVideo: 1080p/i
0m 19.35s: info: enable bd copy(mode=0)
0m 19.35s: info: stream(4113 - 28) not need compress, change to copy mode
0m 19.35s: info: streams()
0m 19.35s: info: blu-ray copy begin (unit[elem[atomic[00800.m2ts]]])
0m 19.35s: info: streams()
0m 19.35s: info: processing source(00800.m2ts)

[CBR929]

I believe this is the log....I see near the bottom of the log it says need not compress, change to copy mode. seems like it just wants to do a copy with no compression???

The reason for this is,: 53 MB needs no compression :
0m 19.34s: TotalSize: 35985 MB
0m 19.34s: SourceSize: 53 MB
0m 19.34s: RemoveHDAudio: 0
0m 19.34s: CompressToAC3: 0
0m 19.34s: OutputSize: 23000 MB
0m 19.34s: OutputDisc: BDMV
0m 19.34s: OutputTarget: BD25
0m 19.35s: OutputVideo: 1080p/i
0m 19.35s: info: enable bd copy(mode=0)
0m 19.35s: info: stream(4113 - 28) not need compress, change to copy mode
CBR929

[pennsylvaniaron]

The reason for this is,: 53 MB needs no compression :
0m 19.34s: TotalSize: 35985 MB
0m 19.34s: SourceSize: 53 MB
0m 19.34s: RemoveHDAudio: 0
0m 19.34s: CompressToAC3: 0
0m 19.34s: OutputSize: 23000 MB
0m 19.34s: OutputDisc: BDMV
0m 19.34s: OutputTarget: BD25
0m 19.35s: OutputVideo: 1080p/i
0m 19.35s: info: enable bd copy(mode=0)
0m 19.35s: info: stream(4113 - 28) not need compress, change to copy mode
CBR929

ok but I don't understand. The output file in the bdmv\stream directory is 36gb. why isn't dvdfab compressing it so it will fit on a 25gb bdr? If I click on FULL DISC, under the volume label it says 54% (compression) 41gb>22gb. But if I click on MAIN MOVIE its doesnt give any %. It says N/A and then does the backup of the main movie as a 36gb file??? regards...

[pennsylvaniaron]

ok but I don't understand. The output file in the bdmv\stream directory is 36gb. why isn't dvdfab compressing it so it will fit on a 25gb bdr? If I click on FULL DISC, under the volume label it says 54% (compression) 41gb>22gb. But if I click on MAIN MOVIE its doesnt give any %. It says N/A and then does the backup of the main movie as a 36gb file??? regards...

EUREKA?? I finally got the desired result but did not figure it out. After running DVDFAB and backing up the disc with the 36gb file I then read that directory into DVDFAB. When I did that I got a compression reading % (36gb-22gb) like you normally get when the original blu ray disc is in your drive.

DVDFAB then backed up the 36gb file and compressed it. I do not know why it will not do it with the original disc. A bug maybe? I know this is not a popular movie for this forum and therefore won't get many responses but its food for thought. Hopefully it does not affect other titles....FYI...Regards...