Xmen first class - a problem

[ant master]

The following popup message appears when scanning BLURAY COPY full disc - This bluray disc contains BD+ which is not supported for now.

[signals]

There will be a server (invisible) update for this ASAP, they just got the disc.

[greek0195]

There will be a server (invisible) update for this ASAP, they just got the disc.

have the same problem.0m 00.85s: Qt Translator file load success
0m 01.04s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 43.64s: detected blu-ray
0m 43.64s: drive E
0m 43.64s: blu-ray type 1
0m 43.64s: volume label XMEN_FIRST_CLASS
0m 44.44s: aacs 1 bd+ 1
1m 34.59s: got discinfo
1m 35.97s: got bdmv
1m 35.98s: Vendor: HL-DT-ST
1m 35.98s: Product: BD-RE BH10LS30
1m 35.98s: Revision: 1.01
1m 35.98s: Vendor specific:
1m 36.00s: AACS version: 1
1m 36.00s: Number of concurrent AGIDs: 1
1m 36.00s: Supports bus encryption: NO
1m 36.00s: Supports binding nonce generation: YES
1m 36.00s: Supports Hybrid discs: NO
1m 36.00s: got agid 0
1m 36.03s: sent host cert chal
1m 36.03s: got drive cert chal
1m 36.03s: BEC 0
1m 36.03s: DRIVE_VENDOR 0x0116
1m 36.06s: got drive key
1m 36.31s: got host key signature
1m 36.33s: verified drive signature
1m 36.39s: verified host signature
1m 36.44s: sent host signature and key point
1m 36.44s: got bus key
1m 36.45s: got agid 0
1m 36.48s: sent host cert chal
1m 36.48s: got drive cert chal
1m 36.48s: BEC 0
1m 36.48s: DRIVE_VENDOR 0x0116
1m 36.51s: got drive key
1m 36.51s: got host key signature
1m 36.51s: verified drive signature
1m 36.51s: verified host signature
1m 36.54s: sent host signature and key point
1m 36.54s: got bus key
1m 36.54s: got volume id
1m 36.54s: got volume id mac
1m 36.54s: volume id is correct
1m 36.54s: got vid
1m 36.67s: blu-ray FE93A37674645E75A576B3F2F09794B02192CCE7
1m 37.17s: cert BEE=0x00 same
1m 38.06s: D A9A6258A
1m 41.32s: bt R:5
1m 41.97s: bd+ generation 9
and here is the log:

[fengtao]

Please try opening the disc again to see the result, we have updated server to support this disc.

Please preview it before copying, and give us feedback, thanks.

[ant master]

Whopee! It works and that was fast. I did a fullcopy iso successfully. Thanks

[b.mercurio]

Hello I am using DVDFab 8.1.2.1 And for some reason My copy burns just fine, but I can't play it. When I try to run it on my blu-ray player I keep geting an error, saying that it can not identify the disc and can not use the networking feature, and then it plays the 20th century fox scene where it skips and freezes sometimes, and then it goes to the main menu and when I click play the screen goes blank. I am trying to back up the whole movie to a BD-R 25gb disc. However, I have noticed that for some reason there is a Digital Copy of the movie on the disc as well, so I am wondering if that is causing the problem. Also I have noticed in the last few updates that the speed of the burns are taking a lot longer. I upgraded my compter about 2 months ago, and when I did that everything sped up really fast and I was able to copy an entire blu-ray movie in about 3 hours. However not it takes any where from 6 to 13 hours. Did the Ninvida part of the DBD FAb Copy software stop using and is now using something else to speed things up.

Thank you,
Brett Mercurio

[inyezi123]

v8.1.2.6 X-Men

The following popup message appears when scanning BLURAY COPY full disc - This bluray disc contains BD+ which is not supported for now.

I thought this was corrected. Please advise.

[signals]

inyezi123
This disc opens fine with the registered version of DVDFab and a working internet connection. If you are using the free version of DVDFab, the protection may not be updated for it yet. Whenever you have a problem like this, post the DVDFab internal log file entry that relates to the disc.

brett
Please install and try this with the new Beta version, v8.1.2.7. If you still have a problem, start a new thread and post the internal and burn logs.

[inyezi123]

DVDFab 8.1.2.7 (2011/10/13 18:34:58)

0m 00.54s: Qt Translator file load success
0m 00.78s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 05.31s: detected blu-ray
0m 05.31s: drive E
0m 05.31s: blu-ray type 1
0m 05.31s: volume label XMEN_FIRST_CLASS
0m 05.85s: aacs 1 bd+ 1
0m 11.95s: got discinfo
0m 12.18s: got bdmv
0m 12.20s: Vendor: HL-DT-ST
0m 12.20s: Product: BD-RE BH10LS30
0m 12.20s: Revision: 1.01
0m 12.20s: Vendor specific:
0m 12.20s: AACS version: 1
0m 12.21s: Number of concurrent AGIDs: 1
0m 12.21s: Supports bus encryption: NO
0m 12.21s: Supports binding nonce generation: YES
0m 12.21s: Supports Hybrid discs: NO
0m 12.21s: got agid 0
0m 12.23s: sent host cert chal
0m 12.25s: got drive cert chal
0m 12.25s: BEC 0
0m 12.25s: DRIVE_VENDOR 0x0116
0m 12.28s: got drive key
0m 12.64s: got host key signature
0m 12.65s: verified drive signature
0m 12.65s: verified host signature
0m 12.68s: sent host signature and key point
0m 12.68s: got bus key
0m 12.70s: got agid 0
0m 12.71s: sent host cert chal
0m 12.71s: got drive cert chal
0m 12.71s: BEC 0
0m 12.71s: DRIVE_VENDOR 0x0116
0m 12.75s: got drive key
0m 12.76s: got host key signature
0m 12.76s: verified drive signature
0m 12.76s: verified host signature
0m 12.79s: sent host signature and key point
0m 12.79s: got bus key
0m 12.81s: got volume id
0m 12.81s: got volume id mac
0m 12.81s: volume id is correct
0m 12.81s: got vid
0m 12.92s: blu-ray 01ED6B25466887087EF4096C56236AEABA6374CD
0m 13.40s: cert BEE=0x00 same
0m 15.96s: D 3D672F2E
0m 20.06s: bt R:5
0m 20.71s: bd+ generation 9
0m 20.71s: failed to open disc 303

[Potti]

Please try it again. We resolved and tested. It's OK now.

[inyezi123]

DVDFab 8.1.2.7 (2011/10/14 08:29:48)

0m 00.59s: Qt Translator file load success
0m 00.75s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 16.59s: detected blu-ray
0m 16.59s: drive E
0m 16.59s: blu-ray type 1
0m 16.60s: volume label XMEN_FIRST_CLASS
0m 17.15s: aacs 1 bd+ 1
0m 25.50s: got discinfo
0m 25.75s: got bdmv
0m 25.75s: Vendor: HL-DT-ST
0m 25.75s: Product: BD-RE BH10LS30
0m 25.76s: Revision: 1.01
0m 25.79s: Vendor specific:
0m 25.79s: AACS version: 1
0m 25.79s: Number of concurrent AGIDs: 1
0m 25.79s: Supports bus encryption: NO
0m 25.79s: Supports binding nonce generation: YES
0m 25.79s: Supports Hybrid discs: NO
0m 25.79s: got agid 0
0m 25.82s: sent host cert chal
0m 25.82s: got drive cert chal
0m 25.82s: BEC 0
0m 25.87s: DRIVE_VENDOR 0x0116
0m 25.90s: got drive key
0m 26.28s: got host key signature
0m 26.28s: verified drive signature
0m 26.28s: verified host signature
0m 26.32s: sent host signature and key point
0m 26.32s: got bus key
0m 26.34s: got agid 0
0m 26.35s: sent host cert chal
0m 26.35s: got drive cert chal
0m 26.35s: BEC 0
0m 26.35s: DRIVE_VENDOR 0x0116
0m 26.40s: got drive key
0m 26.40s: got host key signature
0m 26.40s: verified drive signature
0m 26.40s: verified host signature
0m 26.43s: sent host signature and key point
0m 26.43s: got bus key
0m 26.45s: got volume id
0m 26.45s: got volume id mac
0m 26.45s: volume id is correct
0m 26.45s: got vid
0m 26.56s: blu-ray 01ED6B25466887087EF4096C56236AEABA6374CD
0m 27.06s: cert BEE=0x00 same
0m 35.96s: D 3D672F2E
0m 41.82s: bt R:5
0m 42.46s: bd+ generation 9
0m 42.48s: failed to open disc 303

[inyezi123]

Hi There, Tried again even re-downloaded no luck still comes up with "protection not suported for now".

Thanks once again for your help.

[DiabloZoe]

Do you have an active Internet connection?

[inyezi123]

Yes I do. I've also disconnected Norton 360. I managed to Clone Adjustment Bureau with no problem. It is only X-Men which I've got a problem with.

[K1LL3M]

Just got this, X-Men First Class, Region B - New BD+ not supported at this time.

Using 8.1.2.8b