Tinker, Tailor, Soldier, Spy fails

[phils]

It looks like the Region B blu-ray of Tinker, Tailor, Soldier, Spy has DVDFab beat.

blu-ray copy to BD9: stuttering jerky playback

blu-ray copy to BD25: stuttering jerky playback

blu-ray clone to BD50: the backup just displays a message saying "locked to region B...". The disc and all equipment is region B.

Tried the backups on Nero Media Player and PS3.

Any ideas please?

[signals]

Please try v8.1.6.1 Qt, just released. If you get the same symptoms, post the DVDFab internal log file session from this title.

[phils]

Hi

I tried .61 but it won't open the disc. I tried another blu-ray and it won't opne that either. It just says "error. Check for a later version of DVDFab. This is the log for .61:

DVDFab 8.1.6.1 (2012/02/05 10:02:29)
 
0m 01.61s: Qt Translator file load success 
0m 01.63s: Load config successful.
0m 01.65s: Init profile data driver sucessful.
0m 04.67s: Init GPU settings sucessful.
0m 04.67s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.68s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.83s: Config ExBar successful.
0m 04.83s: dvd2dvd have 8 elements.
0m 04.93s: dvd2mobile have 28 elements.
0m 05.46s: blu-ray2blu-ray have 4 elements.
0m 05.48s: blu-ray2mobile have 17 elements.
0m 05.79s: blu-ray23d have 7 elements.
0m 05.90s: blu-ray2dvd have 1 elements.
0m 05.92s: file2mobile have 27 elements.
0m 06.42s: file2dvd have 1 elements.
0m 06.44s: file2bluray have 1 elements.
0m 06.70s: Config work ui controls successful.
0m 33.59s: Init burn engine successful.
0m 33.62s: StartNotify successful.
0m 34.37s: detected blu-ray
0m 34.37s: drive D
0m 34.37s: blu-ray type 1
0m 34.38s: volume label TINKER_TAILOR_SOLDIER_SPY
0m 02.31s: aacs 1 bd+ 0
0m 02.57s: got discinfo
0m 02.61s: got bdmv
0m 02.62s: Vendor: HL-DT-ST
0m 02.62s: Product: BD-RE BH10LS30
0m 02.62s: Revision: 1.00
0m 02.62s: Vendor specific: 
0m 02.62s: AACS version: 1
0m 02.62s: Number of concurrent AGIDs: 1
0m 02.62s: Supports bus encryption: NO
0m 02.62s: Supports binding nonce generation: YES
0m 02.62s: Supports Hybrid discs: NO
0m 02.62s: got agid 0
0m 02.64s: sent host cert chal
0m 02.64s: got drive cert chal
0m 02.64s: BEC 0
0m 02.65s: DRIVE_VENDOR 0x0116
0m 02.68s: got drive key
0m 03.00s: got host key signature
0m 03.00s: verified drive signature
0m 03.00s: verified host signature
0m 03.03s: sent host signature and key point
0m 03.03s: got bus key
0m 03.05s: got agid 0
0m 03.06s: sent host cert chal
0m 03.07s: got drive cert chal
0m 03.07s: BEC 0
0m 03.07s: DRIVE_VENDOR 0x0116
0m 03.10s: got drive key
0m 03.11s: got host key signature
0m 03.11s: verified drive signature
0m 03.11s: verified host signature
0m 03.14s: sent host signature and key point
0m 03.14s: got bus key
0m 03.14s: got volume id
0m 03.14s: got volume id mac
0m 03.14s: volume id is correct
0m 03.15s: got vid
0m 03.26s: blu-ray 89DC47BE02C869B2A6AB4A4B17BC1FAE002BFD20
0m 03.78s: cert BEE=0x00 same
0m 25.49s: mk exception 
0m 25.49s: failed to open disc 306

[phils]

Just tried to revert to 5.9, but I still get the error and message to check for a later version. It looks like I can't open any disc now

[phils]

Please try v8.1.6.1 Qt, just released. If you get the same symptoms, post the DVDFab internal log file session from this title.

OK, I've tried a full disc copy to a single layer Blu-ray media using v8.1.6.1 Qt. The copy is completely unwatchable. It pauses for a few frames every second - it seems to be very regular. (There are three trailers on the full-disc copy. Two of them have the same fault - one trailer plays OK.) By the way, I had another disc fail with the same fault recently - it was Trust.

Here is the log from the session:

DVDFab 8.1.6.1 (2012/02/06 17:36:12)
 
0m 01.19s: Qt Translator file load success 
0m 01.50s: Load config successful.
0m 01.51s: Init profile data driver sucessful.
0m 03.06s: Init GPU settings sucessful.
0m 04.18s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.19s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.33s: Config ExBar successful.
0m 04.34s: dvd2dvd have 8 elements.
0m 04.43s: dvd2mobile have 28 elements.
0m 04.95s: blu-ray2blu-ray have 4 elements.
0m 04.97s: blu-ray2mobile have 17 elements.
0m 05.28s: blu-ray23d have 7 elements.
0m 05.39s: blu-ray2dvd have 1 elements.
0m 05.41s: file2mobile have 27 elements.
0m 05.91s: file2dvd have 1 elements.
0m 05.92s: file2bluray have 1 elements.
0m 06.17s: Config work ui controls successful.
0m 29.54s: Init burn engine successful.
0m 29.62s: StartNotify successful.
0m 30.40s: detected blu-ray
0m 30.40s: drive D
0m 30.40s: blu-ray type 1
0m 30.40s: volume label TINKER_TAILOR_SOLDIER_SPY
0m 36.66s: aacs 1 bd+ 0
0m 36.92s: got discinfo
0m 36.97s: got bdmv
0m 36.98s: Vendor: HL-DT-ST
0m 36.98s: Product: BD-RE BH10LS30
0m 36.98s: Revision: 1.00
0m 36.98s: Vendor specific: 
0m 36.98s: AACS version: 1
0m 36.98s: Number of concurrent AGIDs: 1
0m 36.98s: Supports bus encryption: NO
0m 36.98s: Supports binding nonce generation: YES
0m 36.98s: Supports Hybrid discs: NO
0m 36.98s: got agid 0
0m 37.00s: sent host cert chal
0m 37.00s: got drive cert chal
0m 37.01s: BEC 0
0m 37.01s: DRIVE_VENDOR 0x0116
0m 37.04s: got drive key
0m 37.35s: got host key signature
0m 37.35s: verified drive signature
0m 37.36s: verified host signature
0m 37.39s: sent host signature and key point
0m 37.39s: got bus key
0m 37.40s: got agid 0
0m 37.42s: sent host cert chal
0m 37.42s: got drive cert chal
0m 37.42s: BEC 0
0m 37.43s: DRIVE_VENDOR 0x0116
0m 37.46s: got drive key
0m 37.46s: got host key signature
0m 37.46s: verified drive signature
0m 37.46s: verified host signature
0m 37.49s: sent host signature and key point
0m 37.50s: got bus key
0m 37.50s: got volume id
0m 37.50s: got volume id mac
0m 37.50s: volume id is correct
0m 37.50s: got vid
0m 37.62s: blu-ray 89DC47BE02C869B2A6AB4A4B17BC1FAE002BFD20
0m 38.13s: cert BEE=0x00 same
0m 39.00s: D 562F3ADA
0m 39.01s: got vuk
0m 39.01s: got unit key 1
0m 43.39s: got extended bdinfo
0m 43.40s: opened blu-ray
0m 11.75s: Blu-ray Copy: Full Disc
0m 11.75s: Source: D:/BDMV/
0m 11.75s: SourceSize: 34712 MB
0m 11.75s: RemoveHDAudio: 0
0m 11.76s: OutputDisc: BDMV
0m 11.76s: OutputTarget: BD25
0m 11.76s: OutputVideo: 1080p/i
0m 13.68s: info: enable bd copy(mode=0)
0m 13.69s: info: video encode mode(0), bitrate(14276), lr-encode(no)
0m 13.69s: info: streams(4113.2)
0m 13.69s: info: blu-ray copy begin (unit[elem[atomic[00014.m2ts]]])
0m 13.71s: try to use gpu acceleration(1) for video decoding
0m 13.71s: CUDA GPU acceleration for video decoding enabled
0m 15.04s: GPU acceleration for video encoding enabled
0m 15.85s: info: h264_encode: encode param profile(2) level(41) bitrate(14276)
0m 26.66s: info: processing source(00014.m2ts)
0m 45.43s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
0m 52.44s: info: group(elem[atomic[00014.m2ts]]) playtime(22022 ms) source(77 MB) request(45 MB) real(46 MB) bitrate(14276 kbps)
0m 52.48s: compress finished: groups request(45 MB, 45 MB) real(46 MB) average_bitrate(14276 kbps)
0m 54.53s: info: enable bd copy(mode=0)
0m 54.53s: info: video encode mode(0), bitrate(11247), lr-encode(no)
0m 54.54s: info: streams(4113.2)
0m 54.54s: info: blu-ray copy begin (unit[elem[atomic[00022.m2ts]]],unit[elem[atomic[00021.m2ts]]],unit[elem[atomic[00019.m2ts]]],unit[elem[atomic[00018.m2ts]]])
0m 54.55s: try to use gpu acceleration(1) for video decoding
0m 54.55s: CUDA GPU acceleration for video decoding enabled
0m 55.66s: GPU acceleration for video encoding enabled
0m 56.17s: info: h264_encode: encode param profile(2) level(41) bitrate(11044)
0m 00.64s: info: processing source(00022.m2ts)
0m 05.64s: info: filter(505.04), reach the mux end, something not out(9 - 0), drop it
0m 05.64s: info: filter(505.04), reach the mux end, something not out(8 - 0), drop it
0m 05.64s: info: filter(505.04), reach the mux end, something not out(7 - 0), drop it
0m 05.64s: info: filter(505.04), reach the mux end, something not out(6 - 0), drop it
0m 05.64s: info: filter(505.04), reach the mux end, something not out(5 - 0), drop it
0m 05.64s: info: filter(505.04), reach the mux end, something not out(4 - 0), drop it
0m 05.64s: info: filter(505.04), reach the mux end, something not out(3 - 0), drop it
0m 05.64s: info: filter(505.04), reach the mux end, something not out(2 - 0), drop it
0m 05.64s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
0m 12.65s: info: group(elem[atomic[00022.m2ts]]) playtime(151192 ms) source(421 MB) request(253 MB) real(252 MB) bitrate(11044 kbps)
0m 12.70s: request bitrate(64.071 kbps) too small, using average bitrate to encode
0m 12.71s: try to use gpu acceleration(1) for video decoding
0m 12.71s: CUDA GPU acceleration for video decoding enabled
0m 12.73s: GPU acceleration for video encoding enabled
0m 13.24s: info: h264_encode: encode param profile(2) level(41) bitrate(11247)
0m 16.67s: info: processing source(00021.m2ts)
0m 20.30s: info: filter(505.04), reach the mux end, something not out(23 - 0), drop it
0m 20.30s: info: filter(505.04), reach the mux end, something not out(22 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(21 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(20 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(19 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(18 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(17 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(16 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(15 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(14 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(13 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(12 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(11 - 0), drop it
0m 20.31s: info: filter(505.04), reach the mux end, something not out(10 - 0), drop it
0m 20.32s: info: filter(505.04), reach the mux end, something not out(9 - 0), drop it
0m 20.32s: info: filter(505.04), reach the mux end, something not out(8 - 0), drop it
0m 20.32s: info: filter(505.04), reach the mux end, something not out(7 - 0), drop it
0m 20.32s: info: filter(505.04), reach the mux end, something not out(6 - 0), drop it
0m 20.32s: info: filter(505.04), reach the mux end, something not out(5 - 0), drop it
0m 20.32s: info: filter(505.04), reach the mux end, something not out(4 - 0), drop it
0m 20.32s: info: filter(505.04), reach the mux end, something not out(3 - 0), drop it
0m 20.32s: info: filter(505.04), reach the mux end, something not out(2 - 0), drop it
0m 20.32s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
0m 27.33s: info: group(elem[atomic[00021.m2ts]]) playtime(1001 ms) source(0 MB) request(0 MB) real(0 MB) bitrate(11247 kbps)
0m 27.38s: try to use gpu acceleration(1) for video decoding
0m 27.38s: CUDA GPU acceleration for video decoding enabled
0m 27.39s: GPU acceleration for video encoding enabled
0m 27.90s: info: h264_encode: encode param profile(2) level(41) bitrate(8731)
0m 34.37s: info: processing source(00019.m2ts)
0m 23.51s: info: filter(505.04), reach the mux end, something not out(6 - 0), drop it
0m 23.51s: info: filter(505.04), reach the mux end, something not out(5 - 0), drop it
0m 23.51s: info: filter(505.04), reach the mux end, something not out(4 - 0), drop it
0m 23.51s: info: filter(505.04), reach the mux end, something not out(3 - 0), drop it
0m 23.51s: info: filter(505.04), reach the mux end, something not out(2 - 0), drop it
0m 23.51s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
0m 30.51s: info: group(elem[atomic[00019.m2ts]]) playtime(118326 ms) source(267 MB) request(164 MB) real(161 MB) bitrate(8731 kbps)
0m 30.58s: try to use gpu acceleration(1) for video decoding
0m 30.58s: CUDA GPU acceleration for video decoding enabled
0m 30.59s: GPU acceleration for video encoding enabled
0m 31.08s: info: h264_encode: encode param profile(2) level(41) bitrate(13772)
0m 34.79s: info: processing source(00018.m2ts)
0m 39.52s: info: filter(505.04), reach the mux end, something not out(5 - 0), drop it
0m 39.52s: info: filter(505.04), reach the mux end, something not out(4 - 0), drop it
0m 39.53s: info: filter(505.04), reach the mux end, something not out(3 - 0), drop it
0m 39.53s: info: filter(505.04), reach the mux end, something not out(2 - 0), drop it
0m 39.53s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
0m 46.53s: info: group(elem[atomic[00018.m2ts]]) playtime(147814 ms) source(496 MB) request(298 MB) real(290 MB) bitrate(13772 kbps)
0m 46.58s: compress finished: groups request(712 MB, 716 MB) real(704 MB) average_bitrate(11247 kbps)
0m 46.58s: not compressed 00021.m2ts
0m 47.64s: info: enable bd copy(mode=0)
0m 47.64s: info: video encode mode(0), bitrate(14932), lr-encode(no)
0m 47.64s: info: streams(4113.2)
0m 47.64s: info: blu-ray copy begin (unit[elem[atomic[00000.m2ts]]])
0m 47.66s: try to use gpu acceleration(1) for video decoding
0m 47.66s: CUDA GPU acceleration for video decoding enabled
0m 48.79s: GPU acceleration for video encoding enabled
0m 49.39s: info: h264_encode: encode param profile(2) level(41) bitrate(14932)
0m 55.85s: info: processing source(00000.m2ts)
0m 54.95s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
0m 59.29s: info: group(elem[atomic[00000.m2ts]]) playtime(7642676 ms) source(32891 MB) request(21461 MB) real(21035 MB) bitrate(14932 kbps)
0m 59.42s: compress finished: groups request(21461 MB, 21461 MB) real(21035 MB) average_bitrate(14932 kbps)
0m 54.48s: detected blu-ray
0m 54.49s: drive D
0m 54.49s: blu-ray type 1
0m 54.49s: volume label

Phil

[stu1690]

I also have alot of juddering with this Blu Ray on my PS3 but it plays fine on my pioneer pc drive.

[terry5]

Disable all GPU codecs for decoding and encoding in common settings/ General / A/V codec and try it again. Thanks

[CBR929]

Hi phils
Along with terry5's advice please do not compress from your drive.

First save it to your HDD as BD50 "Full Disc" or "Main Movie" without compression.
Then open the hard drive folder and select "Full Disc" or "Main Movie" BD25 to compress to another folder on your hard drive.
Use the "Write Data" mode of Fab to open this COMPRESSED folder and burn to a disk.
Doing it this way saves wear and tear on your optical drive and is also faster.
CBR929

[phils]

Thanks guys, but no luck.

I checked the box to disbale the GPU codesc and restarted. I ripped the main movie to disc - about 32Gb. Then I opened it and compressed to to BD25, but saved it to disc rather than waste a BD. When I played the M2TS file it stuttered/paused in just the same way as the previous discs did.

Phil