please help

[terry5]

Hi bigsmooth,
Please goto Common settings page, DVD/Blu-ray->Read, select "Ignore all reading errors automatically" and then try it again. Wish it helps.

[maineman]

Please click on the Tips on Troubleshooting Analyzing/Ripping dvds link below in my sig.
It will cover many common ripping errors and remedies.

Any chance you can exchange the dvd as 90312 suggests?

[bigsmooth]

here's the thing. i was told to:
First save it to your HDD as BD50 without compression.
Then open the hard drive folder and use "Main Movie" mode select BD25 to compress to another folder on your hard drive.
i did all that,but when i did the main movie option, it gets to 15.10 percent and stops. im getting the same results whether im doing it from the disc or a folder. it goes without any problems when i saved it to my hard drive as bd50. just when i do the main movie bd25 i have problems

[terry5]

Hi bigsmooth,
Do as maineman told above in #17. Please post the feedback. Thanks.

[bigsmooth]

did everything in post 17 as well as post 4. no change. still stopping at 15.10 percent

[bigsmooth]

just tried 1 final time. this time process stops at 15.01 percent. can someone please tell me what can be done. ive tried all the suggestions from previous post, but im still getting same results. here's my log.


DVDFab 8.1.6.1 (2012/02/07 21:12:21)

0m 01.93s: Qt Translator file load success
0m 02.91s: Load config successful.
0m 03.35s: Init profile data driver sucessful.
0m 05.92s: Init GPU settings sucessful.
0m 05.92s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 05.94s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 06.73s: Config ExBar successful.
0m 06.73s: dvd2dvd have 8 elements.
0m 07.12s: dvd2mobile have 28 elements.
0m 08.97s: blu-ray2blu-ray have 4 elements.
0m 09.07s: blu-ray2mobile have 18 elements.
0m 10.25s: blu-ray23d have 7 elements.
0m 10.67s: blu-ray2dvd have 1 elements.
0m 10.75s: file2mobile have 27 elements.
0m 12.55s: file2dvd have 1 elements.
0m 12.63s: file2bluray have 1 elements.
0m 13.04s: Config work ui controls successful.
0m 15.39s: Init burn engine successful.
0m 15.67s: StartNotify successful.
0m 58.01s: got bdmv
0m 58.83s: got extended bdinfo
0m 58.61s: detected blu-ray
0m 58.61s: drive E
0m 58.62s: blu-ray type 1
0m 58.62s: volume label
0m 27.25s: Blu-ray Copy: Main Movie
0m 27.27s: Source: K:/Temp/FRIGHT_NIGHT/BDMV/
0m 28.44s: Playlist: 801
0m 28.45s: Chapters: 1 -> 21
0m 28.46s: TotalSize: 29875 MB
0m 28.46s: SourceSize: 24088 MB
0m 28.47s: RemoveHDAudio: 0
0m 28.47s: CompressToAC3: 0
0m 28.47s: OutputDisc: BDMV
0m 28.48s: OutputTarget: BD25
0m 28.48s: OutputVideo: 1080p/i
0m 28.49s: info: enable bd copy(mode=0)
0m 28.55s: info: video encode mode(0), bitrate(28336), lr-encode(no)
0m 28.55s: info: streams(4113.2)
0m 28.57s: info: blu-ray copy begin (unit[elem[atomic[00800.m2ts]]])
0m 28.70s: info: enable multi-thread software decoder
0m 39.34s: info: h264_encode: encode param profile(2) level(41) bitrate(28336)
0m 50.82s: info: processing source(00800.m2ts)

[fengtao]

Could you please check if the disc is dirty or scratched?

You can clone it to hard disk to see the result.

[bigsmooth]

ive already cloned it from the disc at 50gb without compression as i was told to do. then i was told to:First save it to your HDD as BD50 without compression.
Then open the hard drive folder and use "Main Movie" mode select BD25 to compress to another folder on your hard drive.

ive done all that. im getting the results of 15.10 when i open the hard drive folder and use "Main Movie" mode select BD25 to compress to another folder on the hard drive. i can clone it as bd50 with no problem. if i try to compress to 25gb either with the disc or from the folder, im getting the same results.

[maineman]

Disable all gpu acceleration. I see that you disabled Lightning-Recoding, but please confirm this did not "reset".
All AV Codec settings should be set to software only.

You said BD50 rips ok....have you played the movie back from your hdd to confirm?
What was the last version that compressed without any problems?

None of us can reproduce this which makes "remote" troubleshooting exceedingly difficult.

If no luck with the above, try using the latest version which worked for you and post the results.
You may want to consider doing this as a temporary work-around.

[bigsmooth]

ive tried with the last version that worked for me. this process stopped at 16.28 percent and didnt restart. here's the log:


DVDFab 8.0.4.0 (2012/02/08 21:03:53)

0m 00.49s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 file2mobile 1 filemover 1
5m 16.83s: got bdmv
5m 18.35s: got extended bdinfo
6m 56.63s: detected blu-ray
6m 56.69s: drive D
7m 05.92s: blu-ray type 0
7m 06.05s: volume label
7m 15.16s: Blu-ray Copy: Main Movie
7m 15.18s: Source: K:\Temp\FRIGHT_NIGHT\BDMV\
7m 15.30s: Playlist: 800
7m 15.32s: Chapters: 1 -> 21
7m 15.33s: SourceSize: 29824 MB
7m 15.35s: RemoveHDAudio: 0
7m 15.35s: OutputTarget: BD25
7m 15.36s: OutputVideo: 1080p/i
7m 15.50s: Video reencode bitrate (21977 kbps)
7m 15.50s: compress begin: Blu-ray groups clips(00800.m2ts), playtime(6357934 ms), size(29875 MB)
7m 15.53s: processing source(00800.m2ts)
7m 15.53s: using software decoder(h264 multi-thread)
7m 18.92s: h264_encode: encode param profile(2) level(41) bitrate(21977)
39m 08.54s: group(00800.m2ts ) playtime(6357934 ms) source(29875 MB) request(23463 MB) real(3677 MB) bitrate(21977 kbps)
39m 08.65s: compress finished: groups request(23463 MB, 23463 MB) real(3677 MB) average_bitrate(21977 kbps)

[signals]

Please try this and report the results. Using whatever tools you have, try playing the same folder that you are trying to compress (from your K: drive) and see if it plays correctly. Use a software player on your PC, do not burn it to disc. There are free tools to do this if you need them.