Announcement

**phils** · 02-07-2012, 02:42 PM

The problem with the Trust disc completely failing that I reported earlier appears to have been caused by a strange read error. The disc looked clean, but a careful (wet) clean produced a successful BD25 clone (it is a single layer disc). However a BD9 main movie copy from the same disc plays back jerkily and is unwatchable. The log shows the same sort of "error" messages as the Tinker Tailor Soldier Spy log I posted earlier.

Phil

Here is the log:

DVDFab 8.1.6.1 (2012/02/07 11:55:32)

0m 01.10s: Qt Translator file load success
0m 01.13s: Load config successful.
0m 01.14s: Init profile data driver sucessful.
0m 02.86s: Init GPU settings sucessful.
0m 02.86s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 02.87s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.01s: Config ExBar successful.
0m 03.01s: dvd2dvd have 8 elements.
0m 03.13s: dvd2mobile have 28 elements.
0m 03.63s: blu-ray2blu-ray have 4 elements.
0m 03.65s: blu-ray2mobile have 17 elements.
0m 03.96s: blu-ray23d have 7 elements.
0m 04.06s: blu-ray2dvd have 1 elements.
0m 04.08s: file2mobile have 27 elements.
0m 04.58s: file2dvd have 1 elements.
0m 04.59s: file2bluray have 1 elements.
0m 04.84s: Config work ui controls successful.
0m 08.49s: Init burn engine successful.
0m 08.52s: StartNotify successful.
0m 09.23s: detected blu-ray
0m 09.23s: drive D
0m 09.23s: blu-ray type 1
0m 09.23s: volume label TRUST
0m 09.35s: aacs 1 bd+ 0
0m 09.62s: got discinfo
0m 09.63s: got bdmv
0m 09.65s: Vendor: HL-DT-ST
0m 09.65s: Product: BD-RE BH10LS30
0m 09.65s: Revision: 1.00
0m 09.65s: Vendor specific:
0m 09.65s: AACS version: 1
0m 09.65s: Number of concurrent AGIDs: 1
0m 09.65s: Supports bus encryption: NO
0m 09.65s: Supports binding nonce generation: YES
0m 09.65s: Supports Hybrid discs: NO
0m 09.65s: got agid 0
0m 09.67s: sent host cert chal
0m 09.67s: got drive cert chal
0m 09.67s: BEC 0
0m 09.67s: DRIVE_VENDOR 0x0116
0m 09.71s: got drive key
0m 10.02s: got host key signature
0m 10.02s: verified drive signature
0m 10.02s: verified host signature
0m 10.05s: sent host signature and key point
0m 10.05s: got bus key
0m 10.07s: got agid 0
0m 10.08s: sent host cert chal
0m 10.09s: got drive cert chal
0m 10.09s: BEC 0
0m 10.09s: DRIVE_VENDOR 0x0116
0m 10.12s: got drive key
0m 10.12s: got host key signature
0m 10.12s: verified drive signature
0m 10.13s: verified host signature
0m 10.16s: sent host signature and key point
0m 10.16s: got bus key
0m 10.16s: got volume id
0m 10.16s: got volume id mac
0m 10.16s: volume id is correct
0m 10.16s: got vid
0m 10.26s: blu-ray 73E438F5635B79C3FA5C2CD74F5299673651073C
0m 10.51s: cert BEE=0x00
0m 11.23s: D 5CF7BA0B
0m 11.23s: got vuk
0m 11.23s: got unit key 1
0m 14.09s: got extended bdinfo
0m 14.09s: opened blu-ray
0m 54.64s: Blu-ray Copy: Main Movie
0m 54.64s: Source: D:/BDMV/
0m 54.64s: Playlist: 1
0m 54.64s: Chapters: 1 -> 12
0m 54.64s: TotalSize: 18479 MB
0m 54.64s: SourceSize: 18479 MB
0m 54.64s: RemoveHDAudio: 0
0m 54.64s: CompressToAC3: 0
0m 54.64s: OutputDisc: BDMV
0m 54.64s: SoftwareFriendlyAVCHD: 0
0m 54.64s: OutputTarget: BD9
0m 54.64s: OutputVideo: 1080p/i
0m 54.65s: info: enable bd copy(mode=0)
0m 54.66s: info: video encode mode(0), bitrate(6527), lr-encode(no)
0m 54.66s: info: streams(4113.2)
0m 54.66s: info: blu-ray copy begin (unit[elem[atomic[00001.m2ts]]])
0m 54.67s: try to use gpu acceleration(1) for video decoding
0m 54.68s: CUDA GPU acceleration for video decoding enabled
0m 55.88s: GPU acceleration for video encoding enabled
0m 56.44s: info: h264_encode: encode param profile(2) level(41) bitrate(6527)
0m 03.09s: info: processing source(00001.m2ts)
0m 49.45s: info: filter(505.04), reach the mux end, something not out(6 - 0), drop it
0m 49.45s: info: filter(505.04), reach the mux end, something not out(5 - 0), drop it
0m 49.45s: info: filter(505.04), reach the mux end, something not out(4 - 0), drop it
0m 49.45s: info: filter(505.04), reach the mux end, something not out(3 - 0), drop it
0m 49.45s: info: filter(505.04), reach the mux end, something not out(2 - 0), drop it
0m 49.45s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
0m 56.49s: info: group(elem[atomic[00001.m2ts]]) playtime(6333368 ms) source(18479 MB) request(8019 MB) real(7857 MB) bitrate(6527 kbps)
0m 56.54s: compress finished: groups request(8019 MB, 8019 MB) real(7857 MB) average_bitrate(6527 kbps)

It looks liker the premature termination may have been caused by a read error, but although I have completed a main movie backup now it is unwatchable. I have posted the log in a separate thread.

Phil

**signals** · 02-07-2012, 04:17 PM

We don't need two such similar threads about what may be the same problem, they will be merged. Are these PAL (25fps) discs?

**phils** · 02-07-2012, 04:57 PM

Yes - these are PAL discs - UK discs anyway.

Phil

Sorry - I meant to add that I have checked through the forum and upon advice here I checked the Lightnin Encing was unchecked - it was already unchecked.

I think this jerky problem is the same as the jerky problem in my other thread, which still occurs in the latest version, so you may wish to merge my thread
v8.1.6.0 Qt Tinker, Tailor, Soldier, Spy fails as well.

Thanks.

Phil

**signals** · 02-07-2012, 05:05 PM

Thanks, there have been other posts about similar problems with UK/Europe versions. Gathering info for the developers. Will leave the other thread for now based on the squeaky wheel principle.

Link to Tinker,Tailor... thread: http://forum.dvdfab.com/showthread.php?t=16497

Announcement

Trust - BD9 main movie copy fails completely

Trust - BD9 main movie copy fails completely

Comment

Comment

Comment

Comment