escape plan

[Jastuke]

any have problems with escape plan? my drive keeps running and running but never reads

[Flabber]

I take you mean your DVD drive.
The problem could be several things, but whenever I encounter a similar problem on peoples computers this is the first thing I do, fixes the problem most times.

Open the Registry and go to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Click it to open so as you can see the contents in the right hand panel.
Look for the "upper & lower filters", there may be both or just one, and delete them.
Close the Registry.
Go to the Device Manager, look for the CD/DVD drives, find the one causing the problem,
right click on it and uninstall it.
Reboot the computer.
Hopefully after the reboot the problem will be solved.

[october262]

try disable or enable pathpalyer in settings restart dvdfab and try again. make sure the disc is clean and scratch free. post dvdfabs internal logs.
is this a dvd or bluray?? more info is needed.

[glenns]

You should post this where it belongs if dvd post in dvd forum if blu ray post their with your internal log.

[signals]

I made a backup of the Blu-ray of this title with no problems.

[Johnpayd]

do you back up the full disc or just main movie?

do you back up the full disc or just main movie?

[augerpro]

Signals> which title did you pick? There are a ton and the one DVDFab picked doesn't even have a HD audio track. In fact when I scroll down to find an HD audio track it is for a bunch of short titles only a couple minutes long.

[fakokay]

Same problem here with my Blu-ray newest Blu-ray movies... DVDFab cant open the disk. After trying to open it of a while it's stop, popin the send report panel to DVDfab.

- Tryied with PathPlayer ON/OFF/on demand... Same thing.
- Tryied with DVDv8 (8.2.2.9) and v9 (9.1.2.3/5/7).
- movies affected : Escape plan , Ender's Game & FreeBirds

0m 00.02s: 

DVDFab 9.1.2.7 (2014/02/16  16:49:26)

 0m 00.02s: Init Public log : enabled.
 0m 00.02s: Init Private log : finish.
 0m 00.03s: App info: 2014-2-15
 0m 00.03s: App info: 9.1.2.7 9127 Beta
 0m 00.03s: Init CrashReportSettings : disabled.
 0m 00.04s: Init DVDInfo_Log : enabled.
 0m 00.17s: Profile Manager :: Begin Load Profile 
 0m 00.18s: Qt Translator file load success 
 0m 00.73s: App info: client type 2.
 0m 00.75s: Fabplay load: preload successful.
 0m 00.83s: Fabplay load: Load successful.
 0m 00.84s: Init process: Transfer settings successful.
 0m 00.84s: info: fabcheck logpath= D:/david02/Documents/DVDFab9/Log/
 0m 00.84s: fab_check_gpu is running ...
 0m 01.07s: fab_check_gpu run successful 
 0m 01.08s: info: recommand= 0, Shrink support= 1, enable= 0, cuda_cap= 0 , cpu_count= 4
 0m 01.08s: GPU check: GPUAccelerate-12351
 0m 01.08s: GPU check: GPUAccelerate setting-0, 8248
 0m 01.09s: GPU check: CUDA cap-0
 0m 01.09s: GPU check: Support coreavc decode-0
 0m 01.09s: GPU check: Lighting shrink status-1, 0
 0m 01.10s: GPU check: Graphics info 1: NVIDIA GeForce 210 : 6.0 : 1.2
 0m 01.11s: Init process: Load config successful.
 0m 01.11s: Init process: Windows os type is 13.
 0m 01.11s: Init process: command line in is 
 0m 01.22s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( 1:0 )( OV:9125 )( BV:9127 )( S:cbcfdc90eda2ebe3ee25865bfd1faf97 )
 0m 01.23s: Reg check: Option check status-Local
 0m 01.23s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
 0m 01.23s: App info: language type ENU.
 0m 01.24s: Reg check: Start get sys number.
 0m 01.24s: Init process: Init GPU settings successful.
 0m 01.24s: Reg check: Serial number is: 00-21-70-3f-a7-4b
 0m 01.25s: Reg check: Connect type is: 0
 0m 01.47s: Init preview: Begin init preview play engine.
 0m 01.71s: Reg check: Times of connecting error is: 0
 0m 01.71s: Reg check: Parse string: ( S:5f1a8b858a707dbd66b57edc20010b54
 0m 01.72s: Reg check: Option check status-NewWork
 0m 01.90s: Init preview: Init internal engine successful.
 0m 03.26s: Burn engine: start init.
 0m 03.36s: Burn engine: engine type-0.
 0m 03.36s: Burn engine: writer count 1.
 0m 03.37s: Burn engine: 0- F:\ [HL-DT-ST BDDVDRW CH12LS28 1.00 (Ide)].
 0m 03.37s: Burn engine: end init.
 0m 03.86s: Profile Manager :: End Load Profile 
 0m 04.87s: Init process: Init setting page successful.
 0m 05.36s: UI manager: switch to Ripper mode.
 0m 06.61s: Init process: init main ui successful.
 0m 06.72s: Init process: show main ui successful.
 0m 06.74s: DriveX msg: Init driveX F with I/O mode: 0
 0m 06.76s: opening drive F
 0m 06.77s: opened i/o
 0m 06.78s: got media type 15
 0m 24.62s: got max lba 24203103
 0m 33.30s: Exit process: stop running.
 0m 33.30s: Exit process: preview pfn_releaseplayer end
 0m 33.32s: Exit process: preview pfn_deinit end
 0m 33.33s: Exit process: preview FreeLibrary end

[october262]

Same problem here with my Blu-ray newest Blu-ray movies... DVDFab cant open the disk. After trying to open it of a while it's stop, popin the send report panel to DVDfab.

- Tryied with PathPlayer ON/OFF/on demand... Same thing.
- Tryied with DVDv8 (8.2.2.9) and v9 (9.1.2.3/5/7).
- movies affected : Escape plan , Ender's Game & FreeBirds

0m 00.02s: 

DVDFab 9.1.2.7 (2014/02/16  16:49:26)

 0m 00.02s: Init Public log : enabled.
 0m 00.02s: Init Private log : finish.
 0m 00.03s: App info: 2014-2-15
 0m 00.03s: App info: 9.1.2.7 9127 Beta
 0m 00.03s: Init CrashReportSettings : disabled.
 0m 00.04s: Init DVDInfo_Log : enabled.
 0m 00.17s: Profile Manager :: Begin Load Profile 
 0m 00.18s: Qt Translator file load success 
 0m 00.73s: App info: client type 2.
 0m 00.75s: Fabplay load: preload successful.
 0m 00.83s: Fabplay load: Load successful.
 0m 00.84s: Init process: Transfer settings successful.
 0m 00.84s: info: fabcheck logpath= D:/david02/Documents/DVDFab9/Log/
 0m 00.84s: fab_check_gpu is running ...
 0m 01.07s: fab_check_gpu run successful 
 0m 01.08s: info: recommand= 0, Shrink support= 1, enable= 0, cuda_cap= 0 , cpu_count= 4
 0m 01.08s: GPU check: GPUAccelerate-12351
 0m 01.08s: GPU check: GPUAccelerate setting-0, 8248
 0m 01.09s: GPU check: CUDA cap-0
 0m 01.09s: GPU check: Support coreavc decode-0
 0m 01.09s: GPU check: Lighting shrink status-1, 0
 0m 01.10s: GPU check: Graphics info 1: NVIDIA GeForce 210 : 6.0 : 1.2
 0m 01.11s: Init process: Load config successful.
 0m 01.11s: Init process: Windows os type is 13.
 0m 01.11s: Init process: command line in is 
 0m 01.22s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( 1:0 )( OV:9125 )( BV:9127 )( S:cbcfdc90eda2ebe3ee25865bfd1faf97 )
 0m 01.23s: Reg check: Option check status-Local
 0m 01.23s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
 0m 01.23s: App info: language type ENU.
 0m 01.24s: Reg check: Start get sys number.
 0m 01.24s: Init process: Init GPU settings successful.
 0m 01.24s: Reg check: Serial number is: 00-21-70-3f-a7-4b
 0m 01.25s: Reg check: Connect type is: 0
 0m 01.47s: Init preview: Begin init preview play engine.
 0m 01.71s: Reg check: Times of connecting error is: 0
 0m 01.71s: Reg check: Parse string: ( S:5f1a8b858a707dbd66b57edc20010b54
 0m 01.72s: Reg check: Option check status-NewWork
 0m 01.90s: Init preview: Init internal engine successful.
 0m 03.26s: Burn engine: start init.
 0m 03.36s: Burn engine: engine type-0.
 0m 03.36s: Burn engine: writer count 1.
 0m 03.37s: Burn engine: 0- F:\ [HL-DT-ST BDDVDRW CH12LS28 1.00 (Ide)].
 0m 03.37s: Burn engine: end init.
 0m 03.86s: Profile Manager :: End Load Profile 
 0m 04.87s: Init process: Init setting page successful.
 0m 05.36s: UI manager: switch to Ripper mode.
 0m 06.61s: Init process: init main ui successful.
 0m 06.72s: Init process: show main ui successful.
 0m 06.74s: DriveX msg: Init driveX F with I/O mode: 0
 0m 06.76s: opening drive F
 0m 06.77s: opened i/o
 0m 06.78s: got media type 15
 0m 24.62s: got max lba 24203103
 0m 33.30s: Exit process: stop running.
 0m 33.30s: Exit process: preview pfn_releaseplayer end
 0m 33.32s: Exit process: preview pfn_deinit end
 0m 33.33s: Exit process: preview FreeLibrary end

please post this in the bluray copy section you'll get more help there.

[signals]

Moving thread to Blu-ray Copy forum

I am checking to see which playlist I used and will make another test copy, I really don't remember.

///////////UPDATE///////////
I think I used Full Disc previously, but the correct playlist seems to be 610, which does include HD Audio and all the other commentary streams. I will check it when it finishes. I am using 9127 and the Region A/US retail disc.

//////////UPDATE/////////////
Main Movie with 610 gives the same playback as Full Disc played with TMT6, so I think it is correct.
Should be no problem with Ender's Game for any known version, I have tested the retail and "ebay" version, both Reg A/US, Canada could be different. I will check with the Devs to see if it is supported.

[glenns]

Fakokay:Your blu rays drive has a later firmware that improves some blu rays playback check it out see if it's your exact model as they make Oem and none Oem models.You must follow the flashing directions to the letter or you can burn out your drive.Look at the software pull down for the update new one on top of list of 2.

[fakokay]

Hi Glenns,

i flash the firmware to 1.02 (i was at 1.00)... Still no luck.

i try an older blu-ray that i already pass thru dvdfab and it still work. So with 1.02 it still work as expected.

here my new log just in case...

DVDFab 9.1.2.7 (2014/02/17  21:13:42)

 0m 00.31s: Init Public log : enabled.
 0m 00.31s: Init Private log : finish.
 0m 00.31s: App info: 2014-2-15
 0m 00.31s: App info: 9.1.2.7 9127 Beta
 0m 00.31s: Init CrashReportSettings : disabled.
 0m 00.32s: Init DVDInfo_Log : enabled.
 0m 02.57s: Profile Manager :: Begin Load Profile 
 0m 02.65s: Qt Translator file load success 
 0m 02.76s: App info: client type 2.
 0m 02.79s: Fabplay load: preload successful.
 0m 02.88s: Fabplay load: Load successful.
 0m 02.88s: Init process: Transfer settings successful.
 0m 02.90s: info: fabcheck logpath= D:/david02/Documents/DVDFab9/Log/
 0m 02.93s: fab_check_gpu is running ...
 0m 04.94s: fab_check_gpu run successful 
 0m 04.94s: info: recommand= 0, Shrink support= 1, enable= 0, cuda_cap= 0 , cpu_count= 4
 0m 04.94s: GPU check: GPUAccelerate-12351
 0m 04.96s: GPU check: GPUAccelerate setting-0, 8248
 0m 04.96s: GPU check: CUDA cap-0
 0m 04.96s: GPU check: Support coreavc decode-0
 0m 04.96s: GPU check: Lighting shrink status-1, 0
 0m 04.96s: GPU check: Graphics info 1: NVIDIA GeForce 210 : 6.0 : 1.2
 0m 04.97s: Init process: Load config successful.
 0m 04.97s: Init process: Windows os type is 13.
 0m 04.97s: Init process: command line in is 
 0m 06.00s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( 1:0 )( OV:9125 )( BV:9127 )( S:beca2e370dc7f64fd79be99847b2f3eb )
 0m 06.00s: Reg check: Option check status-Local
 0m 06.02s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
 0m 06.02s: App info: language type ENU.
 0m 06.02s: Reg check: Start get sys number.
 0m 06.02s: Reg check: Serial number is: 00-21-70-3f-a7-4b
 0m 06.02s: Reg check: Connect type is: 0
 0m 06.11s: Init process: Init GPU settings successful.
 0m 06.53s: Reg check: Times of connecting error is: 0
 0m 06.53s: Reg check: Parse string: ( S:b896a06e4ff286269e58f9ea7415ebac
 0m 06.55s: Reg check: Option check status-NewWork
 0m 06.86s: Init preview: Begin init preview play engine.
 0m 06.97s: Profile Manager :: End Load Profile 
 0m 08.21s: Init preview: Init internal engine successful.
 0m 10.00s: Burn engine: start init.
 0m 11.13s: Burn engine: engine type-0.
 0m 11.13s: Burn engine: writer count 1.
 0m 11.14s: Burn engine: 0- F:\ [HL-DT-ST BDDVDRW CH12LS28 1.02 (Ide)].
 0m 11.14s: Burn engine: end init.
 0m 12.52s: Init process: Init setting page successful.
 0m 13.02s: UI manager: switch to Ripper mode.
 0m 14.79s: Init process: init main ui successful.
 0m 14.99s: Init process: show main ui successful.
 0m 14.99s: DriveX msg: Init driveX F with I/O mode: 0
 0m 20.81s: opening drive F
 0m 20.86s: opened i/o
 0m 43.36s: DriveX msg: adding media in driveX F.
 0m 53.80s: opening drive F
 0m 55.00s: opened i/o
 0m 55.01s: got media type 15
 0m 55.43s: got max lba 15420831
 1m 26.92s: got disc type 0
 1m 26.92s: DriveX msg: add media in driveX F.
 1m 26.92s: DriveX msg: send open media msg to thread for driveX F.
 1m 26.92s: Source manager: add source id 0.
 1m 26.94s: Open blu-ray disc expired time: 22311011
 1m 26.94s: opening drive F
 1m 26.95s: opened i/o
 1m 44.78s: got max lba 15420831
 2m 02.60s: got disc type 0
 2m 04.77s: terminate process

[glenns]

Fakokay:Are you including the whole log from the disk in the drive as I don't see any disk name in your logs?.

[fakokay]

Hi Gleens,

i noticed that too... Strange. That log was for movie free Birds Blu-ray but occur on the escape Plan (blu-ray) and ender's Game (blu-ray) too sometime.

i must say that my others bluray works fine.

[signals]

What version are your discs (Region and country)?