Announcement

Collapse
No announcement yet.

Recording freezes up

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    sorry but again gets to 11% and just stops... mbs start going backwards

    Comment


      #17
      Are you doing it the way i said?
      Post the log for this attempt.Are you using the store brought disk? is it scratched up?

      Comment


        #18
        ok yes did what you said and it says there isn't enough space on the c: drive

        So I deleted some things. I have 120 gb hard drive and am just running the operating system on it basically so wouldn't think I would run out of space. I am attempting the copy of the cloned file on my computer now.

        I'll post log on completion if success or fail

        Ok so it froze again. 11%

        Could? CoreAVC: not detected be a problem?

        I am trying another disc I own now to see what happens
        Last edited by ebrowning05; 05-25-2014, 03:15 PM.

        Comment


          #19
          DVDFab 9.1.4.6 (2014/05/25 10:55:20)

          0m 00.06s: Init Public log : enabled.
          0m 00.06s: Init Private log : finish.
          0m 00.07s: App info: 2014-5-22
          0m 00.07s: App info: 9.1.4.6 9146 Official
          0m 00.07s: Init CrashReportSettings : enabled.
          0m 00.07s: Init DVDInfo_Log : enabled.
          0m 00.07s: Init Qt_Log : disabled.
          0m 00.20s: Profile Manager :: Begin Load Profile
          0m 00.20s: Qt Translator file load success
          0m 00.32s: App info: client type 2.
          0m 00.37s: Fabplay load: preload successful.
          0m 00.42s: Fabplay load: Load successful.
          0m 00.43s: Init process: Transfer settings successful.
          0m 00.43s: info: fabcheck logpath= C:/Users/Erik/Documents/DVDFab9/Log/
          0m 00.43s: info: fab_check_gpu is running ...
          0m 00.59s: info: fab_check_gpu run successful
          0m 00.60s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 0 , cpu_count= 4
          0m 00.60s: GPU check: GPUAccelerate-851973
          0m 00.60s: GPU check: GPUAccelerate setting-851968, 851968
          0m 00.60s: GPU check: CUDA cap-0
          0m 00.60s: GPU check: Support coreavc decode-0
          0m 00.60s: GPU check: Lighting shrink status-1, 1
          0m 00.60s: GPU check: Graphics info 1: Intel(R) HD Graphics 4600 : :
          0m 00.60s: Init process: Load config failed.
          0m 00.60s: Init process: Windows os type is 64bit System Windows 7.
          0m 00.60s: Init process: command line in is
          0m 00.67s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( OV:9146 )( BV:9143 )( S:87e39f6a6e9d91e19d52622c898ca7e3 )
          0m 00.67s: Reg check: Option check status-Local
          0m 00.67s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
          0m 00.67s: App info: language type ENU.
          0m 00.67s: Reg check: Start get sys number.
          0m 00.67s: Reg check: Serial number is: 00-ff-25-f4-a8-71:04-8d-38-1a-f6-2f:44-8a-5b-6a-5f-dd:04-8d-38-1a-f6-2f
          0m 00.67s: Reg check: Connect type is: 0
          0m 00.68s: Init process: Init GPU settings successful.
          0m 00.84s: Init preview: Begin init preview play engine.
          0m 00.84s: Init preview: Begin init preview play engine(XBMC).
          0m 01.37s: Init preview: Init internal engine successful.
          0m 01.55s: Reg check: Times of connecting error is: 0
          0m 01.55s: Reg check: Parse string: ( S:822c3b917d7784193e8b10c722ac3a83
          0m 01.56s: Reg check: Option check status-NewWork
          0m 02.06s: Burn engine: start init.
          0m 02.17s: Profile Manager :: End Load Profile
          0m 02.31s: Burn engine: engine type-0.
          0m 02.32s: Burn engine: writer count 2.
          0m 02.32s: Burn engine: 0- D:\ [HL-DT-ST BD-RE WH08LS20 2.00 (Ide)].
          0m 02.32s: Burn engine: 1- E:\ [HL-DT-ST BD-RE WH14NS40 1.03 (Ide)].
          0m 02.32s: Burn engine: end init.
          0m 02.90s: Init process: Init setting page successful.
          0m 02.90s: QtLog Mode = false
          0m 02.90s: Show UI Step 2
          0m 03.15s: Show UI Step 3
          0m 03.15s: Start show MainUI.
          0m 03.15s: UI manager: switch to Copy mode.
          0m 03.72s: Init process: init main ui successful.
          0m 03.75s: Init process: show main ui successful.
          0m 03.75s: DriveX msg: Init driveX D with I/O mode: 0
          0m 03.75s: DriveX msg: Init driveX E with I/O mode: 0
          0m 03.87s: opening drive E
          0m 03.89s: opened i/o
          0m 03.90s: got media type 16
          0m 03.91s: got max lba 0
          0m 03.91s: DriveX msg: media open(false) failed in driveX E.
          0m 08.79s: opening drive D
          0m 08.84s: opened i/o
          0m 08.85s: opening drive E
          0m 08.89s: opened i/o
          0m 08.89s: got media type 16
          0m 08.91s: got max lba 0
          0m 21.55s: Source manager: drag file C:/Users/Erik/Documents/DVDFab9/ANCHORMAN_2_SUPERSIZED_VERSION.iso
          0m 21.56s: opening iso C:\Users\Erik\Documents\DVDFab9\ANCHORMAN_2_SUPERS IZED_VERSION.iso
          0m 21.57s: got media type 15
          0m 21.57s: got max lba 23137695
          0m 21.59s: got disc type 20
          0m 21.59s: type Blu-ray BDMV
          0m 21.59s: volume label ANCHORMAN_2_SUPERSIZED_VERSION
          0m 21.60s: Source manager: add source id 0.
          0m 21.61s: Source open statusVD Yes, 2231-10-11
          0m 21.61s: Source open status:BD Yes, 2231-10-11
          0m 21.61s: internal path [:/BDMV/
          0m 21.62s: aacs 0 bd+ 0
          0m 21.64s: got bdmv
          0m 21.84s: movie name: anchorman 2 super-sized version||anchorman_2_supersized_version||c:\users\ erik\documents\dvdfab9\anchorman_2_supersized_vers ion
          0m 22.00s: got bdmv
          0m 22.68s: got extended bdinfo
          0m 22.68s: opened blu-ray
          0m 22.68s: Source manager: open successful.
          0m 23.12s: Work manager: create BD mainmoive work 0 with source 0 and uiinfo 0.
          0m 34.84s: UILog:OnMsgToolbar_Start
          0m 34.86s: UILog:Msg Start : ready start
          0m 34.86s: UILog:Msg Start : start test run work
          0m 34.88s: UILog:right button to null, work falg = -1
          0m 34.89s: UILog:Msg Start : run work
          0m 34.89s: UILog:Run current Work.
          0m 35.29s: UILog:Begin work copy or converter.
          0m 35.29s: UILog:start running at thread.
          0m 35.31s: UILog:return flag at start running at thread ok.
          0m 39.41s: Burn data size is: 23000
          0m 39.42s: Burn disc space is: 23866
          0m 39.52s: BD MainMovie watermark flag: 0
          0m 39.52s: UILog:MsgWork:WorkStatus_Start
          0m 51.46s: Blu-ray Copy: Main Movie
          0m 51.47s: Source: [:/BDMV/
          0m 51.47s: Playlist: 800
          0m 51.47s: Chapters: 1 -> 20
          0m 51.47s: TotalSize: 35125 MB
          0m 51.47s: SourceSize: 34888 MB
          0m 51.48s: RemoveHDAudio: 0
          0m 51.48s: CompressToAC3: 0
          0m 51.48s: OutputSize: 23000 MB
          0m 51.48s: OutputDisc: BDMV
          0m 51.48s: OutputTarget: BD25
          0m 51.48s: OutputVideo: 1080p/i
          0m 51.48s: info: enable bd copy(mode=0)
          0m 51.49s: info: estimate copied other streams size(3890 MB), estimate output video size(18879 MB)
          0m 51.49s: info: video encode mode(0), bitrate(17647), lr-encode(no)
          0m 51.49s: info: streams(4113.2)
          0m 51.49s: info: blu-ray copy begin (unit[elem[atomic[00800.m2ts]]])
          0m 51.50s: info: enable multi-thread software decoder, thread count = 4
          0m 51.53s: info: h264_encode: encode param profile(2) level(41) bitrate(17647) crf(-1)
          0m 51.56s: info: processing source(00800.m2ts)
          13m 06.28s: UILog:OnMsgToolbar_Stop
          13m 08.03s: info: filter:filter_video_decode
          13m 08.03s: info: fifo:1158-filter_h264_ex-1-1,block:0
          13m 08.04s: info: filter:filter_h264_ex
          13m 08.04s: info: fifo:1158-bd_remaster_mux-1-1,block:0
          13m 08.04s: info: filter:bd_remaster_demux
          13m 08.04s: info: fifo:1158-bd_remaster_mux-0-0,block:1171
          13m 08.04s: info: fifo:1158-filter_video_decode-1-1,block:0
          13m 08.04s: info: fifo:1158-bd_remaster_mux-2-3,block:704
          13m 08.04s: info: filter:bd_remaster_mux
          13m 09.07s: info: group(elem[atomic[00800.m2ts]]) playtime(8594627 ms) source(35125 MB) request(22770 MB) real(2801 MB) bitrate(17647 kbps)
          13m 09.08s: compress finished: groups request(22770 MB, 22770 MB) real(2801 MB) average_bitrate(17647 kbps)
          13m 13.17s: UILog:MsgWork:current work finish : 4
          13m 20.25s: Exit process: stop running.
          13m 20.26s: Exit process: preview pfn_releaseplayer end
          13m 20.28s: Exit process: preview pfn_deinit end
          13m 20.28s: Exit process: preview FreeLibrary end

          Comment


            #20
            You posted in the wrong forum, I am moving your thread to the Blu-ray Copy forum area.
            Supplying DVDFab Logs in the Forum ...........................User Manual PDF for DVDFab v11................................ Guide: Using Images in Posts
            Supplying DMS Logs to Developers................................Enlarger AI FAQ.....

            Comment


              #21
              Again new movie no copy fail or freezes at about 10%

              0m 03.43s:

              DVDFab 9.1.4.6 (2014/05/25 11:11:23)

              0m 03.43s: Init Public log : enabled.
              0m 03.43s: Init Private log : finish.
              0m 03.43s: App info: 2014-5-22
              0m 03.43s: App info: 9.1.4.6 9146 Official
              0m 03.43s: Init CrashReportSettings : enabled.
              0m 03.43s: Init DVDInfo_Log : enabled.
              0m 03.43s: Init Qt_Log : disabled.
              0m 03.54s: Profile Manager :: Begin Load Profile
              0m 03.54s: Qt Translator file load success
              0m 03.58s: App info: client type 2.
              0m 03.58s: Fabplay load: preload successful.
              0m 03.65s: Fabplay load: Load successful.
              0m 03.65s: Init process: Transfer settings successful.
              0m 03.65s: info: fabcheck logpath= C:/Users/Erik/Documents/DVDFab9/Log/
              0m 03.65s: info: fab_check_gpu is running ...
              0m 03.75s: info: fab_check_gpu run successful
              0m 03.75s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 0 , cpu_count= 4
              0m 03.75s: GPU check: GPUAccelerate-851973
              0m 03.75s: GPU check: GPUAccelerate setting-851968, 851968
              0m 03.75s: GPU check: CUDA cap-0
              0m 03.75s: GPU check: Support coreavc decode-0
              0m 03.75s: GPU check: Lighting shrink status-1, 1
              0m 03.75s: GPU check: Graphics info 1: Intel(R) HD Graphics 4600 : :
              0m 03.75s: Init process: Load config failed.
              0m 03.75s: Init process: Windows os type is 64bit System Windows 7.
              0m 03.75s: Init process: command line in is
              0m 03.80s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( OV:9146 )( BV:9143 )( S:822c3b917d7784193e8b10c722ac3a83 )
              0m 03.80s: Reg check: Option check status-Local
              0m 03.80s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
              0m 03.80s: App info: language type ENU.
              0m 03.80s: Reg check: Start get sys number.
              0m 03.80s: Init process: Init GPU settings successful.
              0m 03.80s: Reg check: Serial number is: 00-ff-25-f4-a8-71:04-8d-38-1a-f6-2f:44-8a-5b-6a-5f-dd:04-8d-38-1a-f6-2f
              0m 03.80s: Reg check: Connect type is: 0
              0m 03.90s: Init preview: Begin init preview play engine.
              0m 03.90s: Init preview: Begin init preview play engine(XBMC).
              0m 04.34s: Init preview: Init internal engine successful.
              0m 04.67s: Reg check: Times of connecting error is: 0
              0m 04.67s: Reg check: Parse string: ( S:4822b845d487329f1da409b898039b37
              0m 04.67s: Reg check: Option check status-NewWork
              0m 04.96s: Burn engine: start init.
              0m 05.09s: Burn engine: engine type-0.
              0m 05.09s: Burn engine: writer count 2.
              0m 05.09s: Burn engine: 0- D:\ [HL-DT-ST BD-RE WH08LS20 2.00 (Ide)].
              0m 05.10s: Burn engine: 1- E:\ [HL-DT-ST BD-RE WH14NS40 1.03 (Ide)].
              0m 05.10s: Burn engine: end init.
              0m 05.27s: Profile Manager :: End Load Profile
              0m 05.76s: Init process: Init setting page successful.
              0m 05.76s: QtLog Mode = false
              0m 05.76s: Show UI Step 2
              0m 06.00s: Show UI Step 3
              0m 06.01s: Start show MainUI.
              0m 06.01s: UI manager: switch to Copy mode.
              0m 06.52s: Init process: init main ui successful.
              0m 06.54s: Init process: show main ui successful.
              0m 06.54s: DriveX msg: Init driveX D with I/O mode: 0
              0m 06.54s: DriveX msg: Init driveX E with I/O mode: 0
              0m 06.64s: opening drive E
              0m 06.66s: opened i/o
              0m 06.66s: got media type 16
              0m 06.67s: got max lba 0
              0m 06.67s: DriveX msg: media open(false) failed in driveX E.
              0m 11.57s: opening drive D
              0m 11.62s: opened i/o
              0m 11.63s: opening drive E
              0m 11.65s: opened i/o
              0m 11.65s: got media type 16
              0m 11.66s: got max lba 0
              0m 22.99s: DriveX msg: adding media in driveX D.
              0m 35.54s: opening drive D
              0m 36.11s: opened i/o
              0m 36.12s: got media type 15
              0m 36.48s: got max lba 22602143
              0m 37.02s: got disc type 20
              0m 37.02s: type Blu-ray BDMV
              0m 37.02s: volume label TRANSFORMERS_3_AC
              0m 37.02s: DriveX msg: add media in driveX D.
              0m 37.03s: DriveX msg: send open media msg to thread for driveX D.
              0m 37.03s: Source manager: add source id 0.
              0m 37.05s: Source open statusVD Yes, 2231-10-11
              0m 37.05s: Source open status:BD Yes, 2231-10-11
              0m 37.05s: internal path D:/BDMV/
              0m 38.01s: aacs 1 bd+ 0
              0m 38.10s: got bdmv
              0m 38.36s: movie name: transformers dark of the moon||transformers_3_ac
              0m 38.36s: got agid 0
              0m 38.38s: sent host cert chal
              0m 38.38s: got drive cert chal
              0m 38.38s: BEC 0
              0m 38.38s: DRIVE_VENDOR 0x0116
              0m 38.41s: got drive key
              0m 38.41s: got host key signature
              0m 38.42s: verified drive signature
              0m 38.42s: verified host signature
              0m 38.45s: sent host signature and key point
              0m 38.46s: got bus key
              0m 38.46s: got volume id
              0m 38.46s: got volume id mac
              0m 38.46s: volume id is correct
              0m 38.46s: got vid
              0m 38.56s: blu-ray 898FB184A8BC69E3BBF3025D7D9436A0E40B2A9E
              0m 39.08s: cert BEE=0x00 same
              0m 40.51s: D 6FBD6822
              0m 40.53s: main playlist 00800.mpls
              0m 40.54s: selected region A
              0m 40.54s: got vuk
              0m 40.55s: got unit key 7
              0m 46.14s: got bdmv
              0m 55.14s: got extended bdinfo
              0m 55.14s: opened blu-ray
              0m 55.46s: Source manager: open successful.
              0m 55.95s: Work manager: create BD mainmoive work 0 with source 0 and uiinfo 0.
              4m 53.22s: UILog:OnMsgToolbar_Start
              4m 53.23s: UILog:Msg Start : ready start
              4m 53.23s: UILog:Msg Start : start test run work
              4m 53.24s: UILog:right button to null, work falg = -1
              4m 53.25s: UILog:Msg Start : run work
              4m 53.25s: UILog:Run current Work.
              4m 53.71s: UILog:Begin work copy or converter.
              4m 53.71s: UILog:start running at thread.
              4m 53.72s: UILog:return flag at start running at thread ok.
              4m 57.96s: Burn data size is: 23000
              4m 57.96s: Burn disc space is: 23866
              4m 58.41s: BD MainMovie watermark flag: 0
              4m 58.41s: UILog:MsgWork:WorkStatus_Start
              6m 06.97s: Blu-ray Copy: Main Movie
              6m 06.97s: Source: D:/BDMV/
              6m 06.97s: Playlist: 800
              6m 06.97s: Chapters: 1 -> 23
              6m 06.98s: TotalSize: 43501 MB
              6m 06.98s: SourceSize: 40983 MB
              6m 06.98s: RemoveHDAudio: 0
              6m 06.98s: CompressToAC3: 0
              6m 06.98s: OutputSize: 23000 MB
              6m 06.98s: OutputDisc: BDMV
              6m 06.98s: OutputTarget: BD25
              6m 06.98s: OutputVideo: 1080p/i
              6m 06.98s: info: enable bd copy(mode=0)
              6m 06.98s: info: estimate copied other streams size(9060 MB), estimate output video size(13709 MB)
              6m 06.98s: info: video encode mode(0), bitrate(11889), lr-encode(no)
              6m 06.98s: info: streams(4113.2)
              6m 06.98s: info: blu-ray copy begin (unit[elem[atomic[00800.m2ts]]])
              6m 06.98s: info: enable multi-thread software decoder, thread count = 4
              6m 07.02s: info: h264_encode: encode param profile(2) level(41) bitrate(11889) crf(-1)
              6m 07.05s: info: processing source(00800.m2ts)
              54m 16.36s: UILog:OnMsgToolbar_Stop
              54m 20.29s: info: filter:filter_video_decode
              54m 20.29s: info: fifo:17c4-filter_h264_ex-1-1,block:0
              54m 20.30s: info: filter:filter_h264_ex
              54m 20.30s: info: fifo:17c4-bd_remaster_mux-1-1,block:0
              54m 20.30s: info: filter:bd_remaster_demux
              54m 20.30s: info: fifo:17c4-bd_remaster_mux-0-0,block:1171
              54m 20.31s: info: fifo:17c4-filter_video_decode-1-1,block:0
              54m 20.31s: info: fifo:17c4-bd_remaster_mux-2-3,block:409
              54m 20.31s: info: filter:bd_remaster_mux
              54m 21.34s: info: group(elem[atomic[00800.m2ts]]) playtime(9263295 ms) source(43501 MB) request(22770 MB) real(2580 MB) bitrate(11889 kbps)
              54m 21.36s: compress finished: groups request(22770 MB, 22770 MB) real(2580 MB) average_bitrate(11889 kbps)
              54m 25.37s: user cancelled
              54m 25.38s: error reading D:/BDMV/META/DL/bdmt_eng.xml, fileSize 529, copied 0, dwToCopy 529
              54m 26.46s: UILog:MsgWork:current work finish : 4
              54m 31.06s: UILog:OnMsgToolbar_Start
              54m 31.06s: UILog:Msg Start : ready start
              54m 31.07s: UILog:Msg Start : start test run work
              54m 31.08s: UILog:Msg Start : run work
              54m 31.08s: UILog:Run current Work.
              54m 31.38s: UILog:Begin work copy or converter.
              54m 34.33s: UILog:Run Work to end.

              Comment


                #22
                It looks to me that the first disk compressed and finished without error now can you play it on a software player to see if it's all their and plays well before you burn it to disk? you can download A free software player VLC player free on the internet to see if the compressed disk plays well on the computer before you burn it to disk if you don't have a software blu ray player.If it's all their you can delete the cloned disk as that's not compressed and is taken up space.

                You did a good job with the blu rays drive updating the firmware so it's right up to date.Are you saying that the burn to blank disk stops at 11% if so post your burn log the latest attempt will be at the top of the folder cut and paste the movies burn log and put it here in a post.

                Most of the time this is caused by burning the disk to fast so check your burn speed in Fab settings for blu ray disks set it for auto or 1/2 rated disk speed if disk is 8 x set it for 4 x as burning to fast causes problems also use good blank disks as cheap disks cause problems.When you post the burn log It will tell me your set burn speed and other things.

                Look in Fab folders for old disks you may have done and not deleted on the hard drive as the OP system should take only a small amount of hard drive space.
                Last edited by glenns; 05-25-2014, 04:14 PM.

                Comment


                  #23
                  No Burn log. It doesn't get that far. Freezes during reading

                  Comment


                    #24
                    The new disk has a error:54m 25.38s: error reading D:/BDMV/META/DL/bdmt_eng.xml, fileSize 529, copied 0, dwToCopy 529
                    The Chinese staff will have to help you with that error lets stick with the old disk that seems like it compressed ok you need to play it on the computer to see if its ok then we will attempt to burn it after i see the burn log.

                    Comment


                      #25
                      If you are doing what i say you put the store brought disk on the computer using clone/burn so you got the disk to copy and is on the hard drive so your drive was able to read the store brought disk and copy it to hard drive and should have a uncompressed cloned iso correct?

                      Step two should be to play the uncompressed iso clone on a software player on the computer to see if it plays ok and is complete the ending plays.

                      Step 3 is to put the cloned iso back in Fab set to compress to 25 gigs then output to your blu ray burner (to disk) if you do this their should be a burn log folder even if the disk doesn't get made please check it.Your going to burn with your drive that you updated your firmware to not the other drive.Their could be a few different burn log folders in Fab folders check them all.

                      Comment


                        #26
                        Hi,ebrowning05
                        What is your Antivirus software? Such as BitDefender, please disable them and try again.

                        Comment


                          #27
                          If bit defender this has worked for others:
                          ....Bitdefender Internet Security...

                          for some reason it interferes with fabcore.exe so that it keeps increasing in memory usage untill it caps at a certain level and then stalls....no need to uninstall Bitdefender though..... just go into settings/Exclusions/Excluded Processes and add dvdfab.exe and fabcore.exe.....

                          If other security program make sure Fab is a allowed program and it has internet access.

                          Comment


                            #28
                            Glenns, remember that security/antivirus programs change hourly in some cases what they consider to be safe or threat. For a quick test, I think it is better to do what geilee suggested and just disable it briefly.
                            Supplying DVDFab Logs in the Forum ...........................User Manual PDF for DVDFab v11................................ Guide: Using Images in Posts
                            Supplying DMS Logs to Developers................................Enlarger AI FAQ.....

                            Comment


                              #29
                              Ok Starting fresh removed some things and trying again

                              Ok so I removed everything. I haven't changed any settings for DVDFab 9 and I am using bitdefender and haven't changed anything on it.

                              I will do my best to follow but would really like to get this working.

                              I disabled GPU, unchecked enable lightning recording, last 2 tried dvdfab just quit working.
                              Attached Files
                              Last edited by ebrowning05; 05-26-2014, 09:16 PM.

                              Comment


                                #30
                                keeps locking up. bitdefender off this try

                                A first I used my second Blu-ray drive and disc ejected with process failed (bit defender turned back on for this try)
                                Attached Files
                                Last edited by ebrowning05; 05-26-2014, 09:41 PM.

                                Comment

                                Working...
                                X