Unable to copy BDMV Disc ?

[hmsjks]

I have made several attempts to copy a BD disc containing a BDMV folder and Certificate file.

DVDFab recognizes the disc, but never stops reading the disc contents.

dvdfab_internal.log file follows. Any advice to resolve this issue would be greatly appreciated.


Fab 9.1.7.1 (2014/10/18 14:20:19)

0m 00.07s: Init Public log : enabled.
0m 00.07s: Init Private log : finish.
0m 00.09s: App info: 2014-10-17
0m 00.09s: App info: 9.1.7.1 9171 Official
0m 00.10s: Init CrashReportSettings : enabled.
0m 00.10s: Init DVDInfo_Log : enabled.
0m 00.10s: Init Qt_Log : disabled.
0m 00.39s: Profile Manager :: Begin Load Profile
0m 00.42s: Qt Translator file load success
0m 00.42s: App info: client type 10.
0m 00.43s: MobilePlay load: preload successful.
0m 00.51s: MobilePlay load: Load successful.
0m 00.53s: Init process: Transfer settings successful.
0m 00.53s: info: check logpath= C:/Users/Jack/Documents/DVDFab9/Log/
0m 00.56s: info: _check_gpu is running ...
0m 02.96s: Profile Manager :: End Load Profile
0m 03.13s: info: check_gpu run successful
0m 03.13s: info: recommand= 0, Shrink support= 0, enable= 0, cuda_cap= 0 , cpu_count= 4
0m 03.15s: GPU check: GPUAccelerate-455
0m 03.15s: GPU check: GPUAccelerate setting-0, 0
0m 03.17s: GPU check: CUDA cap-0
0m 03.17s: GPU check: Support coreavc decode-0
0m 03.17s: GPU check: Lighting shrink status-0, 0
0m 03.17s: GPU check: Graphics info 1: AMD Radeon HD 8650G : 13.251.3.0 :
0m 03.17s: Init process: Load config successful.
0m 03.18s: Init process: Windows os type is 64bit System Windows 8.
0m 03.18s: Init process: command line in is
0m 03.34s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( 1:0 )( OV:9171 )( BV:9170 )( S:77a18be7aa929affa72b2b7f2ac37016 )
0m 03.34s: Reg check: Option check status-Local
0m 03.34s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:0 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 03.34s: App info: language type ENU.
0m 03.34s: Reg check: Start get sys number.
0m 03.34s: Export Blu-ray source information report : enabled
0m 03.35s: Reg check: Serial number is: 1a-ee-65-39-dc-58:b8-ee-65-39-dc-58:c4-34-6b-00-fd-f2
0m 03.35s: Init process: Init GPU settings successful.
0m 03.35s: Reg check: Connect type is: 0
0m 03.60s: Init preview: Begin init preview play engine.
0m 03.60s: Init preview: Begin init preview play engine(Internal).
0m 04.43s: Init preview: Init internal engine successful.
0m 04.80s: Reg check: Times of connecting error is: 0
0m 04.80s: Reg check: Parse string: ( S:80bc4228d07dbbd41d66edaf6ae58fbe
0m 04.81s: Reg check: Option check status-NewWork
0m 06.07s: Burn engine: start init.
0m 06.08s: Burn engine: set log folder.
0m 06.08s: DVD: init read settings.
0m 06.08s: DVD: init write settings.
0m 22.30s: BD: init read settings.
0m 22.30s: BD: init write settings.
0m 22.31s: bd set region A
0m 22.32s: Burn engine: config engine type-0 begin.
0m 22.33s: Burn engine: config engine type-0 end.
0m 22.33s: Burn engine: writer count 1.
0m 22.34s: Burn engine: 0- E:\ [MATSHITA BD-MLT UJ265 1.00 (Usb)].
0m 22.34s: Burn engine: end init.
0m 23.95s: Init process: Init setting page successful.
0m 23.96s: QtLog Mode = false
0m 23.97s: Show UI Step 2
0m 24.51s: Show UI Step 3
0m 24.52s: Start show MainUI.
0m 24.52s: UI manager: switch to Copy mode.
0m 26.87s: Init process: init main ui successful.
0m 26.98s: Init process: show main ui successful.
0m 26.98s: DriveX msg: Init driveX E with I/O mode: 0
0m 26.99s: opening drive E
0m 27.00s: opened i/o
0m 27.01s: got media type 15
0m 28.32s: got max lba 11574175
0m 29.62s: got disc type 20
0m 29.63s: type Blu-ray BDMV
0m 29.63s: volume label Sin City A Dame to Kill For
0m 29.63s: DriveX msg: add media in driveX E.
0m 29.63s: DriveX msg: send open media msg to thread for driveX E.
0m 29.63s: Source managerpen source flag:1,1,1,1
0m 29.64s: Source managerpen source flag:1,1,1,1
0m 29.64s: Source manager: add source id 0.
0m 29.65s: bd set region ?
0m 29.65s: Source open statusVD Yes, 2231-10-11
0m 29.65s: Source open status:BD Yes, 2231-10-11
0m 29.65s: bd set region ?
0m 29.65s: internal path E:/BDMV/
0m 29.66s: aacs 0 bd+ 0
0m 30.06s: got bdmv
0m 30.07s: movie name: Sin City A Dame to Kill For
0m 30.34s: got bdmv
2m 22.98s: user cancelled
2m 22.98s: failed to open 1
2m 23.01s: Source manager: open failed, delete source id 0.
2m 23.01s: Source managerpen source flag:1,1,1,1
2m 41.03s: set folder E:/BDMV/ with type 2
2m 41.03s: opening folder E:/BDMV/
2m 41.04s: set folder E:/BDMV/ with type 2
2m 41.04s: opening folder E:/BDMV/
2m 41.05s: Source manager: add source id 1.
2m 41.08s: bd set region ?
2m 41.08s: Source open statusVD Yes, 2231-10-11
2m 41.08s: Source open status:BD Yes, 2231-10-11
2m 41.08s: bd set region ?
2m 41.13s: got bdmv
2m 41.15s: movie name: :/
5m 17.23s: user cancelled
5m 17.23s: failed to open 1
5m 17.26s: Source manager: open failed, delete source id 1.
5m 17.40s: Source manager: select video files for open.
5m 17.40s: Source managerpen source flag:1,1,1,1
5m 24.48s: Exit process: stop running.
5m 24.48s: Exit process: preview pfn_releaseplayer end
5m 24.52s: Exit process: preview pfn_deinit end
5m 24.52s: Exit process: preview FreeLibrary end

[october262]

0m 30.07s: movie name: Sin City A Dame to Kill For
this movie is not yet released on dvd or bluray.

[signals]

If this is some sort of homemade disc, it may not contain the same UDF 2.50 file system as a commercial pressing, which DVDFab expects. You can try changing the Blu-ray read mode in Common Settings as shown in the attached capture. Be sure to set this back to UDF 2.50 when you finish.

[hmsjks]

Did the change you suggested. Still would not open the folders. Disk does play on my PC.

[signals]

I think the staff needs to take a look at your log. Is this a pressed commercial disc or a BD-R (recordable)?

[Dora]

hmsjks
Waiting more time for autos read disc . Does not open disc handles .

[hmsjks]

Dora

Waited 10 minutes and drive just kept reading. How long should I wait?

[hmsjks]

Dora -

Tried again, got a message that the file could not be opened, check if disk is playable. Used PowerDVD and it played without a problem. Any help would be appreciated.

[Dora]

What does error display in the log when you got a message?
Is this a new disc that you buy from store?
Any others has this issue?

[SuperFist]

Yeah, this appears to be a homemade disc that was mastered incorrectly as october262 and signals inferred. If it's not initially mastered right, I don't think any Blu-ray movie copying program can help you extract the info contained on it.

[hmsjks]

Message -

Unable to Open file. Make sure it is playable. This is a home made disk successfully copied with Nero. It does play on my DVD player and PC with no problems.

Log entry follows.

Fab 9.1.7.1 (2014/10/24 08:49:52)

0m 00.16s: Init Public log : enabled.
0m 00.17s: Init Private log : finish.
0m 00.17s: App info: 2014-10-17
0m 00.18s: App info: 9.1.7.1 9171 Official
0m 00.19s: Init CrashReportSettings : enabled.
0m 00.20s: Init DVDInfo_Log : enabled.
0m 00.20s: Init Qt_Log : disabled.
0m 00.61s: Profile Manager :: Begin Load Profile
0m 00.65s: Qt Translator file load success
0m 00.65s: App info: client type 10.
0m 00.67s: MobilePlay load: preload successful.
0m 00.75s: MobilePlay load: Load successful.
0m 00.76s: Init process: Transfer settings successful.
0m 00.76s: info: check logpath= C:/Users/Jack/Documents/DVDFab9/Log/
0m 00.86s: info: _check_gpu is running ...
0m 03.07s: info: check_gpu run successful
0m 03.10s: info: recommand= 0, Shrink support= 0, enable= 0, cuda_cap= 0 , cpu_count= 4
0m 03.11s: GPU check: GPUAccelerate-455
0m 03.13s: GPU check: GPUAccelerate setting-0, 0
0m 03.13s: GPU check: CUDA cap-0
0m 03.14s: GPU check: Support coreavc decode-0
0m 03.16s: GPU check: Lighting shrink status-0, 0
0m 03.16s: GPU check: Graphics info 1: AMD Radeon HD 8650G : 13.251.3.0 :
0m 03.17s: Init process: Load config successful.
0m 03.17s: Init process: Windows os type is 64bit System Windows 8.
0m 03.17s: Init process: command line in is
0m 03.55s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( 1:0 )( OV:9171 )( BV:9170 )( S:78ef2dbfde4e50a7640e8434992a0951 )
0m 03.59s: Reg check: Option check status-Local
0m 03.60s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:0 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 03.60s: App info: language type ENU.
0m 03.60s: Reg check: Start get sys number.
0m 03.60s: Export Blu-ray source information report : enabled
0m 03.60s: Reg check: Serial number is: 1a-ee-65-39-dc-58:b8-ee-65-39-dc-58:c4-34-6b-00-fd-f2
0m 03.60s: Reg check: Connect type is: 0
0m 03.84s: Init process: Init GPU settings successful.
0m 04.28s: Init preview: Begin init preview play engine.
0m 04.29s: Init preview: Begin init preview play engine(Internal).
0m 04.41s: Reg check: Times of connecting error is: 0
0m 04.41s: Reg check: Parse string: ( S:b5e3253da6dc7ae17e00a784ffd04c75
0m 04.41s: Reg check: Option check status-NewWork
0m 04.45s: Profile Manager :: End Load Profile
0m 04.93s: Init preview: Init internal engine successful.
0m 06.94s: Burn engine: start init.
0m 06.94s: Burn engine: set log folder.
0m 06.97s: DVD: init read settings.
0m 06.98s: DVD: init write settings.
0m 08.13s: BD: init read settings.
0m 08.13s: BD: init write settings.
0m 08.15s: bd set region A
0m 08.16s: Burn engine: config engine type-0 begin.
0m 08.16s: Burn engine: config engine type-0 end.
0m 08.16s: Burn engine: writer count 1.
0m 08.16s: Burn engine: 0- E:\ [TSSTcorp BDDVDW SE-506CB TS00 (Usb)].
0m 08.16s: Burn engine: end init.
0m 10.20s: Init process: Init setting page successful.
0m 10.20s: QtLog Mode = false
0m 10.22s: Show UI Step 2
0m 10.83s: Show UI Step 3
0m 10.83s: Start show MainUI.
0m 10.84s: UI manager: switch to Copy mode.
0m 13.30s: Init process: init main ui successful.
0m 13.78s: Init process: show main ui successful.
0m 13.78s: DriveX msg: Init driveX E with I/O mode: 0
0m 16.54s: opening drive E
0m 16.55s: opened i/o
0m 16.57s: Source managerpen source flag:1,1,1,1
0m 16.57s: Source managerpen source flag:1,1,1,1

[Joe747]

You can change burners in Fab settings see if that will make a difference.
You can also try version 8 of Fab its on the front page of fab sometimes this will work when version 9 won't.
How about trying clone/burn with version 9 this makes a exact copy bit for bit.See if the disk will open in clone/burn mode.
If all fail you can use Nero as you say you used it and plays fine why not use Nero again? or try img burn to see if it will burn a better disk?

[Dora]

hmsjks
Did it can be open on fab that result of your copied with Nero?
If same things occur, please copy a iso and upload to us. Thx

[hmsjks]

Dora -

I have slow (0.5 Mbps upload speed) and spotty internet service. I will gladly mail you a disk I copied using Nero. Probably be faster than uploading.

hmsjks

[Dora]

The result that you copied using Nero has same results with the orignal disc? Is it always loading and can not open?