v8118 read problem

[JALCAD]

Is there any progress or solution to this yet. My DVDFAB passkey for bluray demo has run out & I can no longer rip blurays. A solution to this would sure be nice & I WON'T PAY $60.00 for something I should not have to get with the license options that I have with DVDFab.

[CBR929]

Is there any progress or solution to this yet. My DVDFAB passkey for bluray demo has run out & I can no longer rip blurays. A solution to this would sure be nice & I WON'T PAY $60.00 for something I should not have to get with the license options that I have with DVDFab.

Hi JALCAD
You were not by any chance running Passkey and Fab at the same time were you?
If so that may be your problem.
You should not run any on the fly decrypter when using Fab as they will both be fighting for control of the drive, and Passkey probably won which would be why Fab could not open the disc.
CBR929

[JALCAD]

Hi JALCAD
You were not by any chance running Passkey and Fab at the same time were you?
If so that may be your problem.
You should not run any on the fly decrypter when using Fab as they will both be fighting for control of the drive, and Passkey probably won which would be why Fab could not open the disc.
CBR929

I have tried it BOTH ways with & without passkey and it will not open a bluray disc even without Passkey enabled. The only way I could get an ISO file from a bluray was to use Passkey & then open that iso up in Fab to shrink it to fit the 25MB disk. Never had problems with this computer & Fab until updating to Windows 7 from XP & now I can't use it.

[CBR929]

Hi JALCAD
If Passkey worked and Fab will not, this leads me to believe that some thing is restricting Fab from either accessing the Internet or software-hardware related.
CBR929

[JALCAD]

I have tried it with & without the Firewall enabled so it should have internet access. I can do regular DVDs in the bluray drive but not blurays. I've even a few blurays that I copied & burned when I have Windows XP on the same computer I'm having the problems with now. I would imagine that this would remove the need to access the internet for protection removal.

[JALCAD]

I take it this must be a dead issue that won't get any resolution. At least that what it looks like to me. A shame that I'll have to look elsewhere for a new program

[seanamos]

Possible answer

Hi JALCAD

Not sure if your problem was the same as mine but it took some digging to find my solution.

I have pasted what I did below.



For anyone who is getting the endless "open bluray source" issue.
This may be a solution.
It worked for me anyway.

DVDFABQT would not open any bluray disc.
Kept getting stuck and freezing.
Only way out was to hard restart.

I checked my sytem logs (event viewer) and found I was getting nvstor64 event 129.
This seemed to correspond to the failures on DVDFAB.
My MOBO has nVidia SATA controller.
I did some checking and found many people have issues with nvstor64.
Someone suggested updating SATA driver manually and picking non nVidia version.
I tried this problem seems to be resolved.

Don't know if this will work for anyone else but it does for me.
__________________
Packard Bell
Intel 8300 2.5gb Quad core
4gb ram
ATI HD4850 1gb
Windows 7 Home Premium 64bit
Liteon iHOS104 Bluray drive (read only)
Norton 360 antivirus & firewall

[JALCAD]

Well I looked at the events & I don't have that error but I have updated the drivers for the SATA & still get the same results. The strange thing is I can rip the blurays using any of other programs (trial) available without problems but can't use DVDFab for the same discs. DVDDecryptor would rip the iso file & I can open & finish it with DVDFab but DVDFab refuses to read the disc.

[CBR929]

Hi JALCAD
If you do not have ImgBurn installed, please install it, you will find it here http://www.imgburn.com/index.php?act=download

Please Open ImgBurn > Tools > Filter Driver Load Order and post what is listed.
CBR929

[JALCAD]

===============================================
Filter Driver Load Order - ImgBurn v2.5.6.0
===============================================

Upper Device Filter: [None Found]
Upper Class Filter: [None Found]
Device: CD/DVD-ROM Device
Lower Class Filter: PxHelp20
Lower Class Filter: CLBStor
Lower Class Filter: AnyDVD
Lower Device Filter: [None Found]

Filter Name: PxHelp20
File Name: C:\Windows\System32\Drivers\PxHelp20.sys
File Version: 3.00.78a [3.0.78.0]
File Description: Px Engine Device Driver for Windows 2000/XP
Product Name: PxHelp20
Product Version: [2.0.0.0]
Company Name: Sonic Solutions
Copyright: Copyright © Sonic Solutions

Filter Name: CLBStor
File Name: C:\Windows\system32\Drivers\CLBStor.sys
File Version: 5.0.4620 [5.0.0.4620]
File Description: Cyberlink Storage Helper Driver (WindowsNT5.x)
Product Name:
Product Version: 5.0.4620 [5.0.0.4620]
Company Name: Cyberlink Co.,Ltd.
Copyright: Copyright(C) Cyberlink Co.,Ltd.

Filter Name: AnyDVD
File Name: C:\Windows\System32\Drivers\AnyDVD.sys
File Version: 6.7.4.1
File Description: AnyDVD Filter Driver
Product Name: AnyDVD
Product Version: 6.7.4.1
Company Name: SlySoft, Inc.
Copyright: Copyright 2002 - 2010 SlySoft, Inc.

[seanamos]

Hi JALCAD

I think I actually downgraded my SATA drivers to get it working

Currently using Microsoft driver AHCI 1.0 Serial ATA (version 6.1.7601.17514)

If I update drivers it goes back to the nVidia one that causes me problems

[CBR929]

Hi JALCAD
Have you tried disabling the "other" on the fly decrypter you have installed?
Try it.
My suggestion is to remove the filters installed by your other software through ImgBurn Open ImgBurn > Tools > Filter Driver Load Order > click on filter and click remove, you may have to restart your computer.
Some programs like to be the bully on the block and will refuse to let any other programs from accessing your drive and using it, except itself.
Remember that what ever program installed these filters may no longer work properly.
CBR929

[JALCAD]

Yes I have been having this problem before I installed the "other" on the fly decrypter & still have it afterwards. I installed the "other" one to see how it would rip blurays to ISO files so that I can still make copies of the blurays hoping that by some miracle DVDFab would start working again before the trial ran out.
I did remove the filters that Imgburn had set & it is still just sitting on the Open Bluray source dialog. About ready to downgrade back to Windows XP since it seems like Windows 7 on this computer & DVDFab make for a bad combination. Or hope that maybe DVDFab would allow me a license for DVDDecrypter HD so that I can still use the program that I purchased to copy the blurays the way I used to be able to. And yes I know that it does work on others computers with windows 7 but also know that some others are having the same problem that I am having with windows 7 from some of the other posts.

[CBR929]

I did remove the filters that Imgburn had set & it is still just sitting on the Open Bluray source dialog. About ready to downgrade back to Windows XP since it seems like Windows 7 on this computer & DVDFab make for a bad combination. Or hope that maybe DVDFab would allow me a license for DVDDecrypter HD so that I can still use the program that I purchased to copy the blurays the way I used to be able to. And yes I know that it does work on others computers with windows 7 but also know that some others are having the same problem that I am having with windows 7 from some of the other posts.

Hi JALCAD
Did you check to make sure that the filters were removed?

ImgBurn did not set these filters, the other program did, so it has exclusive rights to your burner and does not want to release it to no one.

Yes, I know other members have no problems at all thats why this is so hard to track down.
You should still have the free HD Decrypter for your movies but will be limited to new releases, you would have to wait about 90 days until they are supported.

Have you tried to reset DMA this has helped in the past
Open Fab Click the Green √ top right > General > make sure Check for DMA Automatically is Checked and also Click the Reset DMA to the right click OK and restart Fab, you may also have to restart your computer..
I wish I could be more helpful, this is confusing

CBR929

[JALCAD]

When I check IMGBurn they are all removed
===============================================
Filter Driver Load Order - ImgBurn v2.5.6.0
===============================================

Upper Device Filter: [None Found]
Upper Class Filter: [None Found]
Device: CD/DVD-ROM Device
Lower Class Filter: [None Found]
Lower Device Filter: [None Found]

I guess I should have said DVDFab Passkey instead of decryptor. Where would I find the HD Decrypter part of DVDFab. I've looked & don't see anything available other than DVDFab & if I can't open Blurays with DVDFab then the decrypter part wouldn't be any good either or Im missing something. Yes it is frustrating thing to figure out and I do appreciate the help & suggestions. One of these times its going to work again.