BD to DVD Blu-ray ISO to DVD error

[wwallace]

Couldn't find this by searching....

Not sure if this is possible but I'm trying to use my legit version of Blu-ray Copy to convert a full size blu-ray ISO down to BD5 size (4300mb). When I run the process it errors out, any idea what's causing this? Thanks anyone.

Analyzing started: 14:01:05
Analyzing completed successfully: 14:01:05
Copy process started: 14:01:05
Video reencode bitrate (1265 kbps): 14:01:05
CUDA GPU acceleration for video decoding enabled : 14:01:05
GPU acceleration for video encoding enabled: 14:01:06
Source( 00306.m2ts ): 14:01:09
Task_1 failed! Error=1000(504.00 0 error: filter name(503.01), type(2), id(1), get module_error(502.04 7 706 1)
): 14:01:14
Process failed!: 14:01:14

[signals]

To better illuminate the problem, please attach the DVDFab internal log session from the failed attempt. Instructions for this are linked in my sig (below) if needed.

[wwallace]

re

I like 8.2.2.9, yes its old but it should still work.


DVDFab 8.2.2.9 (2015/12/25 20:22:37)

0m 00.83s: Start preload dll...
0m 00.89s: Load dll successful.
0m 00.89s: Start load fabplay dll...
0m 00.95s: Load fabplay dll successful.
0m 00.96s: Windows os type is: 13.
0m 00.96s: Transfer settings successful.
0m 01.14s: GPUAccelerate: 12345
0m 01.14s: CUDA cap: 1
0m 01.14s: Support coreavc decode: 0
0m 01.14s: Graphics info: NVIDIA Quadro FX 3800 : :
0m 01.14s: Qt Translator file load success
0m 01.19s: Load config successful.
0m 01.29s: Init profile data driver sucessful.
0m 03.87s: Init GPU settings sucessful.
0m 03.87s: option dvd2dvd 1 dvd2mobile 0 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 1 filemover 0
0m 03.88s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.15s: Config ExBar successful.
0m 04.15s: dvd2dvd have 8 elements.
0m 04.31s: dvd2mobile have 31 elements.
0m 04.32s: blu-ray2blu-ray have 4 elements.
0m 04.36s: blu-ray2mobile have 21 elements.
0m 05.00s: blu-ray23d have 7 elements.
0m 05.18s: blu-ray2dvd have 1 elements.
0m 05.19s: file2mobile have 30 elements.
0m 06.11s: file2dvd have 1 elements.
0m 06.14s: file2bluray have 1 elements.
0m 06.43s: Config work ui controls successful.
0m 06.51s: Init burn engine successful.
0m 06.56s: StartNotify successful.
0m 13.32s: opening iso F:/Blu-Ray Library/xxxx/xxxx.iso
0m 22.07s: got media type 15
0m 22.08s: got max lba 11357215
0m 22.14s: got disc type 20
0m 22.15s: type Blu-ray BDMV
0m 22.15s: volume label xxxx
0m 22.19s: opening iso F:/Blu-Ray Library/xxxx/xxxx.iso
0m 22.19s: got max lba 11357215
0m 22.20s: got disc type 20
0m 22.20s: internal path [:/BDMV/
0m 22.20s: aacs 0 bd+ 0
0m 22.21s: got bdmv
0m 22.21s: movie name: xxxx||xxxxx
0m 22.23s: got bdmv
0m 23.70s: got extended bdinfo
0m 23.70s: opened blu-ray
1m 33.24s: Blu-ray Copy: Main Movie
1m 33.24s: Source: [:/BDMV/
1m 33.24s: Playlist: 0
1m 33.24s: Chapters: 1 -> 29
1m 33.24s: TotalSize: 22179 MB
1m 33.24s: SourceSize: 20465 MB
1m 33.24s: RemoveHDAudio: 1
1m 33.24s: CompressToAC3: 0
1m 33.24s: OutputSize: 4300 MB
1m 33.24s: OutputDisc: BDMV
1m 33.24s: SoftwareFriendlyAVCHD: 0
1m 33.25s: OutputTarget: BD5
1m 33.25s: OutputVideo: 1080p/i
1m 33.25s: info: enable bd copy(mode=0)
1m 33.32s: info: video encode mode(0), bitrate(1265), lr-encode(no)
1m 33.33s: info: streams(4113.2,4352.4,4353.4)
1m 33.33s: info: blu-ray copy begin (unit[elem[atomic[00306.m2ts],atomic[00307.m2ts],atomic[00308.m2ts],atomic[00309.m2ts],atomic[00310.m2ts],atomic[00311.m2ts],atomic[00312.m2ts],atomic[00313.m2ts],atomic[00314.m2ts],atomic[00351.m2ts],atomic[00352.m2ts],atomic[00315.m2ts],atomic[00316.m2ts],atomic[00317.m2ts],atomic[00318.m2ts],atomic[00319.m2ts],atomic[00320.m2ts],atomic[00321.m2ts],atomic[00322.m2ts],atomic[00323.m2ts],atomic[00324.m2ts],atomic[00325.m2ts],atomic[00326.m2ts],atomic[00327.m2ts],atomic[00328.m2ts],atomic[00329.m2ts],atomic[00330.m2ts],atomic[00331.m2ts],atomic[00332.m2ts],atomic[00333.m2ts],atomic[00334.m2ts],atomic[00335.m2ts],atomic[00336.m2ts],atomic[00337.m2ts],atomic[00338.m2ts],atomic[00339.m2ts],atomic[00340.m2ts],atomic[00341.m2ts],atomic[00342.m2ts],atomic[00343.m2ts],atomic[00344.m2ts],atomic[00345.m2ts],atomic[00346.m2ts],atomic[00347.m2ts],atomic[00348.m2ts],atomic[00349.m2ts],atomic[00350.m2ts]]])
1m 33.34s: try to use gpu acceleration(1) for video decoding
1m 33.34s: CUDA GPU acceleration for video decoding enabled
1m 34.38s: GPU acceleration for video encoding enabled
1m 34.39s: info: h264_encode: encode param profile(2) level(41) bitrate(1265)
1m 37.43s: info: processing source(00306.m2ts)
1m 37.46s: error: filter name(503.01), type(2), id(1), get module_error(502.04 7 706 1)
1m 37.92s: reauthor 306.clip error:1 1m 42.56s: blu-ray main movie 504.00 0 error: filter name(503.01), type(2), id(1), get module_error(502.04 7 706 1)

[signals]

Although v8229 is no longer officially supported someone will try to help you. Also, you seem to have edited the log file, which makes this more difficult. Also, in the future please attach the log file rather than posting it in the text window. Instructions for this are linked in my sig, below. If you want quick assistance, update to v9.2.2.x and attach a log from a current version of the product and tell us whether the ISO was made with DVDFab.

[wwallace]

re:

I remember in the past when I opened Dvdvfab I used to receive popups that a newer version was available...that downloaded and auto-installed over my existing version. Haven't seen that in a while.

So I just installed V9 but it did a parallel install and on opening wants me to purchase it. Am I not allowed to use my existing serial key with version 9?

[signals]

No, your license for v8 is 100% applicable to v9, but it uses a different authentication system. You must first create a user account at the Member Center on the DVDFab website (http://www.dvdfab.cn/member.htm?a=register&t=per) being certain to use the email address you used when purchasing the product. Remember this email and password, you must enter them on the Activate page of DVDFab v9 (shown on attachment) to register the product. This will enable access to updated decryption information and other capabilities in the registered version that are not available in the free version.