All Qt versions

[90312]

Frankster91, along about the time people started reporting a problem Nokia released version 4.7.2.0 of QT. There may be a correlation? If you have a version that works you can hover over the QTcore.dll in the DVDFab directory and see the QT version. There may be some sensitivity in 4.7.2.0 to certain XP configurations. See below:

[Frankster91]

I am not sure what Fengtao uses, but the two uninstaller's that I use are CCleaner found here "under tools" , if using the cleaner in CCleaner after uninstalling a program make sure to put a check in the "Old Prefetch Data"

For stubborn programs the free Revo Uninstaller found here
I use the advanced mode for Revo but, I very carefully check the folders in Bold in the final scan of registry items to make sure that I am not deleting something that I do not wish to remove.

One time I almost deleted all my "Keys" to my Fab products, but I could have just gone to the members area to get them back.

Also under "Tools" in Revo they have a "junk file cleaner" that cleans up windows files.

CBR929

I use CCleaner a good bit but it doesnt get everything. I'll give Revo a try. I've installed it before but it didn't find everything as well but it was an older version and I removed it. I'll give this newer version a run. Thanks for the info. I'll post later if I make any headway!!!

[CBR929]

CBR929,

Does Fengtao(DVDFAB) have a cleaner for his program? Just like some programs such as Nero and most antivirus programs do that remove every trace of the program from the system and registry. I have not heard of one but I thought I would ask. Thanks..

I am not sure what Fengtao uses, but the two uninstaller's that I use are CCleaner found here "under tools" , if using the cleaner in CCleaner after uninstalling a program make sure to put a check in the "Old Prefetch Data"

For stubborn programs the free Revo Uninstaller found here
I use the advanced mode for Revo but, I very carefully check the folders in Bold in the final scan of registry items to make sure that I am not deleting something that I do not wish to remove.

One time I almost deleted all my "Keys" to my Fab products, but I could have just gone to the members area to get them back.

Also under "Tools" in Revo they have a "junk file cleaner" that cleans up windows files.

CBR929

[Frankster91]

Hi Frankster91

No, you are probably all right with that one.
CBR929

CBR929,

Does Fengtao(DVDFAB) have a cleaner for his program? Just like some programs such as Nero and most antivirus programs do that remove every trace of the program from the system and registry. I have not heard of one but I thought I would ask. Thanks..

[Frankster91]

My issue is DVDFabQT will not run.
I attached my installed programs. (Information from CCleaner)
I wish this information to become your light.


MotherBoard: BIOSTAR TA890GXB HD
CPU: AMD PhenomII X6 1055T
Memory: CFD W3U1333Q-2G
Disk(AHCImode): C:\A-Data S596Turbo(32GB) D:\Hitachi HDS721050CLA362
VideoCard: PowerColor AX6850 1GBD5-DH
DVDdrive(AHCImode): TSST SH-S243D
OS: Windows XP Professional SP3 (Japanese)

Thanks Kim152. I see we do have some of the same programs installed but nothing at this time stands out that should be causing our issue. Anything, no matter how small, is very helpful. Thank you again.

[CBR929]

Hi CBR929,

Yes, I have the latest C++ runtimes and I have all the .Net Frameworks installed with the exception of 1.1. I never installed it for I never needed it. Do you think I need one that old?

Hi Frankster91

No, you are probably all right with that one.
CBR929

[Kim152]

I know I'm shooting in the dark

My issue is DVDFabQT will not run.
I attached my installed programs. (Information from CCleaner)
I wish this information to become your light.


MotherBoard: BIOSTAR TA890GXB HD
CPU: AMD PhenomII X6 1055T
Memory: CFD W3U1333Q-2G
Disk(AHCImode): C:\A-Data S596Turbo(32GB) D:\Hitachi HDS721050CLA362
VideoCard: PowerColor AX6850 1GBD5-DH
DVDdrive(AHCImode): TSST SH-S243D
OS: Windows XP Professional SP3 (Japanese)

[Frankster91]

Hi Frankster91
A few more questions for you....oh no
Do you have the latest .Net Frameworks http://www.microsoft.com/downloads/e...displaylang=en and the latest Microsoft Visual C++ Runtime Library's http://www.microsoft.com/downloads/e...displaylang=en installed from Microsoft???
If not try installing them and try again.
CBR929

Hi CBR929,

Yes, I have the latest C++ runtimes and I have all the .Net Frameworks installed with the exception of 1.1. I never installed it for I never needed it. Do you think I need one that old?

[CBR929]

Hi Frankster91
A few more questions for you....oh no
Do you have the latest .Net Frameworks http://www.microsoft.com/downloads/e...displaylang=en and the latest Microsoft Visual C++ Runtime Library's http://www.microsoft.com/downloads/e...displaylang=en installed from Microsoft???
If not try installing them and try again.
CBR929

[Frankster91]

I know I could more than likely fix this issue with a reformat and fresh install of Windows but I'd rather try and fix it without all that as most people would also. I shouldn't have to do that just to go from a non QT working version to a QT version.

Anyone have any thoughts on Securom and the QT versions having an issue?I know on this rig with XP sp3 I have about 15 games that use Securom. My test bed does not have any games and QT8092 works. My Windows 7 rigs have games but they are downloaded from Steam and QT 8092 works. My daughters Vista laptop has no games and QT 8092 will works on it. On my other Xp sp3 rig QT 8092 will not work on it but it does have some Securom protected games on it.

I know I'm shooting in the dark but would like to know your thoughts. I may uninstall those games and run the Securom uninstaller to see if that has any changes on this issue that I'm having.

[Frankster91]

True
I have also read another post about a memory error found here

CBR929

I have gotten that error but not always most of the time it doesn't give me any at all but just sits there. Sometimes it will give the same error but it will be 0x02764a77 referenced at 0x001879d4 could not be read. They change when I do get one.

Virtual memory settings were set at min/max 4096. I changed it to have Windows to manage it and rebooted. Tried QT8092 again but having the same issue.

I ran MemTestx86 ver. 4.0 and it did find a few errors. I removed one Dimm at a time and ran MemTest again until I found which one it was. I removed the matching pair to keep my system at double data rate and ran Memtest again and found nothing.

I tried to install QT8092 again but had the same issue.

Still hard at it.

[CBR929]

Perhaps, but unless the operator intervenes and changes the default settings for virtual memory this is unlikely.

True
I have also read another post about a memory error found here

CBR929

[90312]

Perhaps, but unless the operator intervenes and changes the default settings for virtual memory this is unlikely.

[CBR929]

Based on the error in red there is a couple things I would try. Have your OS disk in the drive, open a command window and type: sfc /scannow (there is a space between sfc and /scannow) this will verify the Windows protected files on your system in case the install didn’t go as planned. Then I would run Memtest86 exhaustive memory test. This will stress your memory and detect a bad DIMM if any.

Hi 90312
I have also read up on doing what you have suggested.
This can also happed if not enough virtual memory is not allocated for the Paging file of the drives, in which your memory DIMM may be fine.
CBR929

[90312]

Based on the error in red there is a couple things I would try. Have your OS disk in the drive, open a command window and type: sfc /scannow (there is a space between sfc and /scannow) this will verify the Windows protected files on your system in case the install didn’t go as planned. Then I would run Memtest86 exhaustive memory test. This will stress your memory and detect a bad DIMM if any.