BD Ripper (3D Plus) Playstation Jerky Playback 8.1.3.6 - Fine on 8.0.7.3

[pbelton]

Hi,
I recently upgraded to 8.1.3.2 and ripping film has become impossible as all films have become jerky when streaming to the playstation 3 using twonky server.
I then upgraded to 8.1.3.6 as this was just released and this has not resolved the problem.
I still have 8.0.7.3 on my PC and this continues to work perfectly.I have disabled all Graphics card acceleration as I have an ATI graphics card and I have seen this make the film too bright.

I have just Completed test rips and the logs are below. I can confirm the issue is still there



DVDFab 8.1.3.6 (2011/12/10 08:38:55) Jerky
0m 00.90s: Qt Translator file load success
0m 00.90s: import key file Z:\ 1
0m 01.46s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 0 bd2dvd 1 file2mobile 1 filemover 1
0m 09.23s: detected blu-ray
0m 09.23s: drive Z
0m 09.23s: blu-ray type 1
0m 09.23s: volume label AFTER_LIFE
0m 09.43s: aacs 1 bd+ 0
0m 11.21s: got discinfo
0m 11.23s: got bdmv
0m 11.24s: Vendor: HL-DT-ST
0m 11.24s: Product: BDDVDRW CH10LS20
0m 11.24s: Revision: 1.00
0m 11.24s: Vendor specific: 4
0m 11.24s: AACS version: 1
0m 11.24s: Number of concurrent AGIDs: 1
0m 11.24s: Supports bus encryption: NO
0m 11.24s: Supports binding nonce generation: YES
0m 11.24s: Supports Hybrid discs: NO
0m 11.24s: got agid 0
0m 11.26s: sent host cert chal
0m 11.26s: got drive cert chal
0m 11.26s: BEC 0
0m 11.26s: DRIVE_VENDOR 0x0074
0m 11.29s: got drive key
0m 12.35s: got host key signature
0m 12.35s: verified drive signature
0m 12.35s: verified host signature
0m 12.38s: sent host signature and key point
0m 12.38s: got bus key
0m 12.40s: got agid 0
0m 12.41s: sent host cert chal
0m 12.41s: got drive cert chal
0m 12.41s: BEC 0
0m 12.41s: DRIVE_VENDOR 0x0074
0m 12.44s: got drive key
0m 12.44s: got host key signature
0m 12.44s: verified drive signature
0m 12.44s: verified host signature
0m 12.48s: sent host signature and key point
0m 12.48s: got bus key
0m 12.49s: got volume id
0m 12.49s: got volume id mac
0m 12.49s: volume id is correct
0m 12.49s: got vid
0m 12.54s: blu-ray 4237178E8000DF9CD39DD7ADA509886A20A41301
0m 12.71s: cert BEE=0x00
0m 14.00s: D 380DFB18
0m 14.00s: got vuk
0m 14.05s: got unit key 1
0m 16.89s: got extended bdinfo
0m 16.89s: opened blu-ray
1m 38.25s:


------ begin mobile work(1/16) ------


1m 38.25s: info: create config(5)
1m 38.25s: info: convert profile(ps3.default)
1m 38.25s: info: bluray playlist(2),angle(0),chapter(1->1),3D(0)
1m 38.25s: info: streams((4113.2)(4353.2))
1m 38.26s: info: not set correct fourcc for video(28)
1m 38.26s: info: set output video frame_rate(24000/1001)
1m 38.28s: info: enable multi-thread software decoder
1m 39.43s: info: h264_encode: encode param profile(2) level(41) bitrate(14989)
1m 43.49s: info: processing source(00009.m2ts)
4m 21.36s: info: enable multi-thread software decoder
4m 21.38s: info: h264_encode: encode param profile(2) level(41) bitrate(14989)
4m 26.45s: info: processing source(00009.m2ts)
7m 25.61s:


------ finish mobile work ------





DVDFab 8.0.7.3 (2011/12/10 08:49:11) Perfect
0m 00.54s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 05.13s: detected blu-ray
0m 05.13s: drive Z
0m 05.13s: blu-ray type 1
0m 05.13s: volume label AFTER_LIFE
0m 06.63s: root 8CCEC1CEAD7E4A32_VOLUME_SET_ID:AFTER_LIFE:AFTER_LI FE:AFTER_LIFE
0m 06.72s: aacs 1 bd+ 0
0m 06.77s: got discinfo
0m 06.77s: got bdmv
0m 06.78s: got agid 0
0m 06.80s: failed to send host certificate: sensekey 05 asc 6F acsq 00
0m 07.05s: blu-ray 4237178E8000DF9CD39DD7ADA509886A20A41301
0m 08.70s: D 380DFB18
0m 08.70s: E 0087846A
0m 08.70s: got vuk
0m 08.76s: got unit key 1
0m 11.48s: got extended bdinfo
0m 11.48s: opened blu-ray
2m 24.44s:


------ begin mobile work(1/16) ------


2m 24.44s: create config(5)
2m 24.44s: convert profile(ps3.default)
2m 24.44s: blu-ray playlist(2) angle(0) chapter(1->1)
2m 24.44s: stream(4113,AVC,1) stream(4353,LPCM,1)
2m 24.44s: not set correct fourcc for video(28)
2m 24.45s: info: set output video frame_rate(24000/1001)
2m 24.47s: processing source(00009.m2ts)
2m 24.48s: using software decoder(h264 multi-thread)
2m 25.53s: h264_encode: encode param profile(2) level(41) bitrate(15000)
5m 25.74s: processing source(00009.m2ts)
5m 25.74s: using software decoder(h264 multi-thread)
5m 25.74s: h264_encode: encode param profile(2) level(41) bitrate(15000)
7m 39.62s: audio_decode finish job
8m 28.40s:


------ finish mobile work ------



Can you please help?

Thanks
Paul

[terry5]

We are dealing with this issue and please wait for the fixed build.

[pbelton]

We are dealing with this issue and please wait for the fixed build.

Thanks Terry5, Can you please advvise when a fix is expected?

[terry5]

Please give us more time.Thanks pbelton.

[pbelton]

Hi, Has this been fixed in any of the new build yet?

[colossus71]

Confirmed that this is still an issue in 8.1.7.5 QT...

[Medic193]

I have had this problem and have been locked into using 8.0.8.5. It seems now that version is unsupported. Unable to open anything with that version and have been forced to use the newer versions that never work correctly for me.

To me it seems like the issue began when they made the conversion to QT. Not that the UI would cause this issue.

Recently I have tried using the Plex media server to a google tv and this issue was still there. This led me to thinking I may be doing something wrong within dvdfab. I have the newest version set up the exact same way as 8.0.8.5 and that version was flawless. So I have been at a loss on how to correct this.

Of course, now that I think about it, the google tv is a Sony product..... I guess therein lies the problem...

[signals]

Use the newer versions with the decryption updates in Main Movie mode to write the decrypted movie to your HDD in "folder" output mode. Then use that folder as a source for v8085 or 8073 to make the conversion to MP4 or whatever you are using for playback.

[Medic193]

Thanks for the quick reply signals. I hadn't even thought of doing it that way.

I read in some other posts and decided to try the MKV container. That worked very well. Something has definitely been wrong with the MP4 container since 8.0.8.5. Streaming from multiple servers to multiple clients all showed the stop and go playing (Buffering maybe?) using MP4. That is trying every combination with DVDFab that I could.

I'm surprised more people aren't speaking up about this. Maybe there aren't many people streaming mp4?

[pbelton]

Come on DVD FAB. We pay uou money for this application and we are still unable to use it

[colossus71]

Jittery MP4 to PS3 playback

Confirmed this is STILL an issue in 8.1.9.6QT, despite ripping the full image to the HDD first then converting to MP4 using MP4+AAC.

[colossus71]

Update to the PS3 Jerky playback issue

Would it be possible to get an update or perhaps an ETA on when this issue will be fixed? This has been a problem since the first QT version of DVDFab. I would be glad to provide any information required to help troubleshoot this issue.

Regards

[colossus71]

Confirmed this is STILL an issue in 8.2.0.0 QT, after ripping the full image to the HDD first then converting to MP4 using MP4+AAC.

[signals]

Which profile?

[colossus71]

Profile Type

signals,

Here's the profile information:

8.2.0.0 QT (03/08/2012)
Blu-ray Ripper -> PS3

Profile = ps3.mp4.hd

Settings:
Encoding Method = Fast encoding (1-pass)
Fixed Bitrate = 10000
Audio Bitrate = 448 kbps
Channel = 5.1 Multichannel
Subpicture = Direct rendor to video

All others default.

I've tried variations of these settings, reducing the bitrates, changing the encoding method, etc. All have the same result...jittery playback that usually hangs when streaming to the PS3 (PS3mediaserver). Everything is hard-wired by the way.

Also, this exact same profile configuration works on 8.0.8.5. Playback/streaming is fine.

Let me know if you require any further information.

Thanks