BD Ripper (3D Plus) Sos please help!!!

[glov9152]

Every time I try and rip a DVD or blu-ray, a window comes up saying fabcore has stopped working. Could someone please help me fix this problem as it is getting very frustrating. I have the current version of dvdfab.

[90312]

Try unistalling and dowload a fresh installer. Install and try again.

[glov9152]

Tried that...didn't work. Same error appears fabcore has stopped working.

[90312]

Try turning lightning recoding off and see if it still does it?

[glov9152]

Tried that ...same error again.

[glov9152]

When i checked the common settings,thev a/v codec..it says that the supported video codecs are
DXVA_MODE_H264
DXVA_MODE VC1
But at the bottom of that page it says
CORE AVC: cannot be detected

[signals]

Post the internal and process logs from one of these crashes.

[glov9152]

Found dmp file,but unable to read it..what is the best way to open this file?

[glov9152]

if I buy core avc codec...will that fix my problem?

[90312]

I wouldn't think so. Your logs will be in your documents folder the the DVDFab folder, need to post those.

[glov9152]

DVDFab 8.1.6.3 (2012/02/15 14:20:59)

0m 02.08s: Qt Translator file load success


DVDFab 8.1.6.3 (2012/02/15 14:21:10)

0m 02.41s: Qt Translator file load success
0m 02.47s: Load config successful.
0m 05.66s: Init profile data driver sucessful.
0m 09.20s: Init GPU settings sucessful.
0m 09.20s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 09.21s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 09.48s: Config ExBar successful.
0m 09.48s: dvd2dvd have 8 elements.
0m 09.67s: dvd2mobile have 28 elements.
0m 10.54s: blu-ray2blu-ray have 4 elements.
0m 10.58s: blu-ray2mobile have 17 elements.
0m 11.09s: blu-ray23d have 7 elements.
0m 11.28s: blu-ray2dvd have 1 elements.
0m 11.31s: file2mobile have 27 elements.
0m 12.15s: file2dvd have 1 elements.
0m 12.18s: file2bluray have 1 elements.
0m 12.60s: Config work ui controls successful.


DVDFab 8.1.6.3 (2012/02/15 14:25:12)

0m 01.83s: Qt Translator file load success
0m 01.83s: import key file C:\Users\Glenn\AppData\Local\Temp\key.dvdfab6 1


DVDFab 8.1.6.3 (2012/02/15 14:25:29)

0m 01.71s: Qt Translator file load success
0m 01.76s: Load config successful.
0m 01.85s: Init profile data driver sucessful.
0m 04.64s: Init GPU settings sucessful.
0m 04.64s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.65s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.90s: Config ExBar successful.
0m 04.91s: dvd2dvd have 8 elements.
0m 05.08s: dvd2mobile have 28 elements.
0m 05.93s: blu-ray2blu-ray have 4 elements.
0m 05.96s: blu-ray2mobile have 17 elements.
0m 06.46s: blu-ray23d have 7 elements.
0m 06.64s: blu-ray2dvd have 1 elements.
0m 06.67s: file2mobile have 27 elements.
0m 26.82s: Init burn engine successful.
0m 26.86s: StartNotify successful.
0m 07.50s: file2dvd have 1 elements.
0m 07.53s: file2bluray have 1 elements.
0m 07.94s: Config work ui controls successful.
0m 28.97s: detected dvd
0m 29.02s: drive E
0m 29.02s: dvd type 1
0m 29.02s: volume label THE_NUTCRACKER
0m 29.10s: got copyright 1 0
0m 29.76s: got udf/iso
0m 32.11s: got discinfo
0m 32.12s: pathplayer enabled
0m 06.61s: got dvdinfo
0m 06.78s: opened dvd
0m 12.29s:


------ begin mobile work(1/1) ------


0m 12.29s: info: create config(0)
0m 12.29s: info: convert profile(generic.avi.xvid.audiocopy)
0m 12.29s: info: dvd playlist(15),angle(0),chapter(1->27),3D(0)
0m 12.29s: info: streams((480.2)(137.1))
0m 12.30s: info: set output video frame_rate(30000/1001)
0m 12.59s: boost::interprocess::shared_memory_objec new global exception
0m 29.05s:


------ begin mobile work(1/1) ------


0m 29.06s: info: create config(0)
0m 29.06s: info: convert profile(generic.avi.xvid.audiocopy)
0m 29.06s: info: dvd playlist(15),angle(0),chapter(1->27),3D(0)
0m 29.06s: info: streams((480.2)(137.1))
0m 29.23s: info: set output video frame_rate(30000/1001)
0m 29.42s: boost::interprocess::shared_memory_objec new global exception
0m 07.49s:


------ begin mobile work(1/1) ------


0m 07.49s: info: create config(0)
0m 07.49s: info: convert profile(generic.avi.xvid.audiocopy)
0m 07.50s: info: dvd playlist(15),angle(0),chapter(1->27),3D(0)
0m 07.50s: info: streams((480.2)(137.1))
0m 07.68s: info: set output video frame_rate(30000/1001)
0m 07.87s: boost::interprocess::shared_memory_objec new global exception
0m 19.26s: detected blu-ray
0m 19.26s: drive E
0m 19.26s: blu-ray type 1
0m 19.26s: volume label HARRY_POTTER_7_PART_2
0m 19.31s: aacs 0 bd+ 0
0m 19.32s: got discinfo
0m 19.38s: got bdmv
0m 32.68s: got extended bdinfo
0m 32.68s: opened blu-ray
0m 37.76s:


------ begin mobile work(1/1) ------


0m 37.76s: info: create config(5)
0m 37.76s: info: convert profile(avi.xvid.mp3)
0m 37.77s: info: bluray playlist(0),angle(0),chapter(1->29),3D(0)
0m 37.77s: info: streams((4113.2)(4352.2)(4608.16))
0m 37.78s: info: set output video frame_rate(24000/1001)
0m 37.78s: info: subpicture preset(2), mode(10)
0m 37.78s: try to use gpu acceleration(2) for video decoding
0m 37.79s: DXVA GPU acceleration for video decoding enabled
0m 37.81s: boost::interprocess::shared_memory_objec new global exception
0m 03.35s:


------ begin mobile work(1/1) ------

[glov9152]

DVDFab 8.1.6.3 (2012/02/15 14:20:59)

0m 02.08s: Qt Translator file load success


DVDFab 8.1.6.3 (2012/02/15 14:21:10)

0m 02.41s: Qt Translator file load success
0m 02.47s: Load config successful.
0m 05.66s: Init profile data driver sucessful.
0m 09.20s: Init GPU settings sucessful.
0m 09.20s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 09.21s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 09.48s: Config ExBar successful.
0m 09.48s: dvd2dvd have 8 elements.
0m 09.67s: dvd2mobile have 28 elements.
0m 10.54s: blu-ray2blu-ray have 4 elements.
0m 10.58s: blu-ray2mobile have 17 elements.
0m 11.09s: blu-ray23d have 7 elements.
0m 11.28s: blu-ray2dvd have 1 elements.
0m 11.31s: file2mobile have 27 elements.
0m 12.15s: file2dvd have 1 elements.
0m 12.18s: file2bluray have 1 elements.
0m 12.60s: Config work ui controls successful.


DVDFab 8.1.6.3 (2012/02/15 14:25:12)

0m 01.83s: Qt Translator file load success
0m 01.83s: import key file C:\Users\Glenn\AppData\Local\Temp\key.dvdfab6 1


DVDFab 8.1.6.3 (2012/02/15 14:25:29)

0m 01.71s: Qt Translator file load success
0m 01.76s: Load config successful.
0m 01.85s: Init profile data driver sucessful.
0m 04.64s: Init GPU settings sucessful.
0m 04.64s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.65s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.90s: Config ExBar successful.
0m 04.91s: dvd2dvd have 8 elements.
0m 05.08s: dvd2mobile have 28 elements.
0m 05.93s: blu-ray2blu-ray have 4 elements.
0m 05.96s: blu-ray2mobile have 17 elements.
0m 06.46s: blu-ray23d have 7 elements.
0m 06.64s: blu-ray2dvd have 1 elements.
0m 06.67s: file2mobile have 27 elements.
0m 26.82s: Init burn engine successful.
0m 26.86s: StartNotify successful.
0m 07.50s: file2dvd have 1 elements.
0m 07.53s: file2bluray have 1 elements.
0m 07.94s: Config work ui controls successful.
0m 28.97s: detected dvd
0m 29.02s: drive E
0m 29.02s: dvd type 1
0m 29.02s: volume label THE_NUTCRACKER
0m 29.10s: got copyright 1 0
0m 29.76s: got udf/iso
0m 32.11s: got discinfo
0m 32.12s: pathplayer enabled
0m 06.61s: got dvdinfo
0m 06.78s: opened dvd
0m 12.29s:

[glov9152]

---- begin mobile work(1/1) ------


0m 03.35s: info: create config(5)
0m 03.35s: info: convert profile(avi.xvid.mp3)
0m 03.36s: info: bluray playlist(0),angle(0),chapter(1->29),3D(0)
0m 03.36s: info: streams((4113.2)(4352.2)(4608.16))
0m 03.37s: info: set output video frame_rate(24000/1001)
0m 03.37s: info: subpicture preset(2), mode(10)
0m 03.37s: try to use gpu acceleration(2) for video decoding
0m 03.38s: DXVA GPU acceleration for video decoding enabled
0m 03.39s: boost::interprocess::shared_memory_objec new global exception


DVDFab 8.1.6.3 (2012/02/15 14:33:07)

0m 01.80s: Qt Translator file load success
0m 01.81s: import key file C:\Users\Glenn\AppData\Local\Temp\key.dvdfab6 1


DVDFab 8.1.6.3 (2012/02/15 14:33:19)

0m 01.74s: Qt Translator file load success
0m 01.80s: Load config successful.
0m 01.88s: Init profile data driver sucessful.
0m 04.69s: Init GPU settings sucessful.
0m 04.70s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.70s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.95s: Config ExBar successful.
0m 04.96s: dvd2dvd have 8 elements.
0m 05.13s: dvd2mobile have 28 elements.
0m 05.97s: blu-ray2blu-ray have 4 elements.
0m 06.00s: blu-ray2mobile have 17 elements.
0m 06.50s: blu-ray23d have 7 elements.
0m 06.68s: blu-ray2dvd have 1 elements.
0m 06.71s: file2mobile have 27 elements.
0m 07.53s: file2dvd have 1 elements.
0m 07.55s: file2bluray have 1 elements.
0m 07.96s: Config work ui controls successful.
0m 10.63s: Init burn engine successful.
0m 10.77s: StartNotify successful.
0m 13.66s: detected blu-ray
0m 13.66s: drive E
0m 13.66s: blu-ray type 1
0m 13.67s: volume label HARRY_POTTER_7_PART_2
0m 13.71s: aacs 0 bd+ 0
0m 13.72s: got discinfo
0m 13.78s: got bdmv
0m 27.35s: got extended bdinfo
0m 27.35s: opened blu-ray
0m 05.08s:


------ begin mobile work(1/1) ------


0m 05.08s: info: create config(5)
0m 05.09s: info: convert profile(avi.xvid.mp3)
0m 05.09s: info: bluray playlist(0),angle(0),chapter(1->29),3D(0)
0m 05.09s: info: streams((4113.2)(4353.2)(4608.16))
0m 05.10s: info: set output video frame_rate(24000/1001)
0m 05.10s: info: subpicture preset(2), mode(10)
0m 05.10s: try to use gpu acceleration(2) for video decoding
0m 05.11s: DXVA GPU acceleration for video decoding enabled
0m 05.12s: boost::interprocess::shared_memory_objec new global exception


DVDFab 8.1.6.3 (2012/02/15 14:46:29)

0m 01.81s: Qt Translator file load success
0m 01.87s: Load config successful.
0m 01.96s: Init profile data driver sucessful.
0m 04.86s: Init GPU settings sucessful.
0m 04.86s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.86s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.13s: Config ExBar successful.
0m 05.13s: dvd2dvd have 8 elements.
0m 05.31s: dvd2mobile have 28 elements.
0m 06.17s: blu-ray2blu-ray have 4 elements.
0m 06.21s: blu-ray2mobile have 17 elements.
0m 06.72s: blu-ray23d have 7 elements.
0m 06.91s: blu-ray2dvd have 1 elements.
0m 06.94s: file2mobile have 27 elements.
0m 07.78s: file2dvd have 1 elements.
0m 07.80s: file2bluray have 1 elements.
0m 08.22s: Config work ui controls successful.


DVDFab 8.1.6.3 (2012/02/15 14:53:39)

0m 01.84s: Qt Translator file load success
0m 01.89s: Load config successful.
0m 01.98s: Init profile data driver sucessful.
0m 04.81s: Init GPU settings sucessful.
0m 04.81s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.81s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.09s: Config ExBar successful.
0m 05.09s: dvd2dvd have 8 elements.
0m 05.27s: dvd2mobile have 28 elements.
0m 06.10s: blu-ray2blu-ray have 4 elements.
0m 06.14s: blu-ray2mobile have 17 elements.
0m 06.64s: blu-ray23d have 7 elements.
0m 06.82s: blu-ray2dvd have 1 elements.
0m 06.85s: file2mobile have 27 elements.
0m 07.67s: file2dvd have 1 elements.
0m 07.70s: file2bluray have 1 elements.
0m 08.10s: Config work ui controls successful.
0m 10.54s: Init burn engine successful.
0m 10.69s: StartNotify successful.
0m 11.36s: detected blu-ray
0m 11.36s: drive E
0m 11.36s: blu-ray type 1
0m 11.36s: volume label HARRY_POTTER_7_PART_2
0m 11.41s: aacs 0 bd+ 0
0m 11.42s: got discinfo
0m 11.48s: got bdmv
0m 24.66s: got extended bdinfo
0m 24.66s: opened blu-ray
0m 40.29s:


------ begin mobile work(1/1) ------


0m 40.29s: info: create config(5)
0m 40.29s: info: convert profile(avi.xvid.mp3)
0m 40.30s: info: bluray playlist(0),angle(0),chapter(1->29),3D(0)
0m 40.30s: info: streams((4113.2)(4352.2)(4608.16))
0m 40.30s: info: set output video frame_rate(24000/1001)
0m 40.31s: info: subpicture preset(2), mode(10)
0m 40.31s: try to use gpu acceleration(2) for video decoding
0m 40.31s: DXVA GPU acceleration for video decoding enabled
0m 40.33s: boost::interprocess::shared_memory_objec new global exception


DVDFab 8.1.6.3 (2012/02/15 14:55:39)

0m 01.82s: Qt Translator file load success
0m 01.87s: Load config successful.
0m 01.96s: Init profile data driver sucessful.
0m 04.77s: Init GPU settings sucessful.
0m 04.77s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.78s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.02s: Config ExBar successful.
0m 05.02s: dvd2dvd have 8 elements.
0m 05.19s: dvd2mobile have 28 elements.
0m 06.03s: blu-ray2blu-ray have 4 elements.
0m 06.06s: blu-ray2mobile have 17 elements.
0m 06.57s: blu-ray23d have 7 elements.
0m 06.74s: blu-ray2dvd have 1 elements.
0m 06.78s: file2mobile have 27 elements.
0m 07.60s: file2dvd have 1 elements.
0m 07.62s: file2bluray have 1 elements.
0m 08.03s: Config work ui controls successful.
0m 10.24s: Init burn engine successful.
0m 10.38s: StartNotify successful.
0m 11.16s: detected blu-ray
0m 11.16s: drive E
0m 11.16s: blu-ray type 1
0m 11.16s: volume label HARRY_POTTER_7_PART_2
0m 11.22s: aacs 0 bd+ 0
0m 11.23s: got discinfo
0m 11.29s: got bdmv
0m 24.36s: got extended bdinfo
0m 24.37s: opened blu-ray
0m 29.19s:

[glov9152]

0m 29.19s: info: create config(5)
0m 29.20s: info: convert profile(avi.xvid.mp3)
0m 29.20s: info: bluray playlist(0),angle(0),chapter(1->29),3D(0)
0m 29.20s: info: streams((4113.2)(4352.2)(4608.16))
0m 29.21s: info: set output video frame_rate(24000/1001)
0m 29.21s: info: subpicture preset(2), mode(10)
0m 29.21s: try to use gpu acceleration(2) for video decoding
0m 29.22s: DXVA GPU acceleration for video decoding enabled
0m 29.24s: boost::interprocess::shared_memory_objec new global exception


DVDFab 8.1.6.3 (2012/02/15 15:00:24)

0m 01.99s: Qt Translator file load success
0m 02.05s: Load config successful.
0m 02.16s: Init profile data driver sucessful.
0m 05.00s: Init GPU settings sucessful.
0m 05.00s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 05.01s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.28s: Config ExBar successful.
0m 05.28s: dvd2dvd have 8 elements.
0m 05.46s: dvd2mobile have 28 elements.
0m 06.31s: blu-ray2blu-ray have 4 elements.
0m 06.35s: blu-ray2mobile have 17 elements.
0m 06.86s: blu-ray23d have 7 elements.
0m 07.03s: blu-ray2dvd have 1 elements.
0m 07.06s: file2mobile have 27 elements.
0m 07.89s: file2dvd have 1 elements.
0m 07.92s: file2bluray have 1 elements.
0m 08.33s: Config work ui controls successful.
0m 11.39s: Init burn engine successful.
0m 11.54s: StartNotify successful.
0m 14.47s: detected blu-ray
0m 14.47s: drive E
0m 14.48s: blu-ray type 1
0m 14.48s: volume label HARRY_POTTER_7_PART_2
0m 14.52s: aacs 0 bd+ 0
0m 14.53s: got discinfo
0m 14.60s: got bdmv
0m 28.28s: got extended bdinfo
0m 28.29s: opened blu-ray
0m 32.85s:


------ begin mobile work(1/1) ------


0m 32.86s: info: create config(5)
0m 32.86s: info: convert profile(avi.xvid.mp3)
0m 32.86s: info: bluray playlist(0),angle(0),chapter(1->29),3D(0)
0m 32.86s: info: streams((4113.2)(4352.2)(4608.16))
0m 32.87s: info: set output video frame_rate(24000/1001)
0m 32.87s: info: subpicture preset(2), mode(10)
0m 32.87s: info: enable multi-thread software decoder
0m 32.89s: boost::interprocess::shared_memory_objec new global exception


DVDFab 8.1.6.3 (2012/02/15 15:16:48)

0m 01.85s: Qt Translator file load success
0m 01.90s: Load config successful.
0m 01.99s: Init profile data driver sucessful.
0m 04.81s: Init GPU settings sucessful.
0m 04.81s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.82s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.05s: Config ExBar successful.
0m 05.05s: dvd2dvd have 8 elements.
0m 05.23s: dvd2mobile have 28 elements.
0m 06.07s: blu-ray2blu-ray have 4 elements.
0m 06.10s: blu-ray2mobile have 17 elements.
0m 06.61s: blu-ray23d have 7 elements.
0m 06.78s: blu-ray2dvd have 1 elements.
0m 06.81s: file2mobile have 27 elements.
0m 07.63s: file2dvd have 1 elements.
0m 07.66s: file2bluray have 1 elements.
0m 08.07s: Config work ui controls successful.
0m 09.86s: Init burn engine successful.
0m 10.00s: StartNotify successful.
0m 12.90s: detected blu-ray
0m 12.90s: drive E
0m 12.90s: blu-ray type 1
0m 12.90s: volume label HARRY_POTTER_7_PART_2
0m 12.95s: aacs 0 bd+ 0
0m 12.96s: got discinfo
0m 13.02s: got bdmv
0m 26.51s: got extended bdinfo
0m 26.52s: opened blu-ray
0m 31.63s:

[glov9152]

DVDFab 8.1.6.3 (2012/02/15 17:04:57)

0m 01.84s: Qt Translator file load success
0m 01.89s: Load config successful.
0m 01.98s: Init profile data driver sucessful.
0m 04.81s: Init GPU settings sucessful.
0m 04.81s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.82s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.05s: Config ExBar successful.
0m 05.05s: dvd2dvd have 8 elements.
0m 05.23s: dvd2mobile have 28 elements.
0m 06.07s: blu-ray2blu-ray have 4 elements.
0m 06.11s: blu-ray2mobile have 17 elements.
0m 06.62s: blu-ray23d have 7 elements.
0m 06.80s: blu-ray2dvd have 1 elements.
0m 06.83s: file2mobile have 27 elements.
0m 07.65s: file2dvd have 1 elements.
0m 07.68s: file2bluray have 1 elements.
0m 08.09s: Config work ui controls successful.
0m 08.16s: Init burn engine successful.
0m 08.31s: StartNotify successful.
0m 11.25s: detected blu-ray
0m 11.25s: drive E
0m 11.26s: blu-ray type 1
0m 11.26s: volume label HARRY_POTTER_7_PART_2
0m 11.88s: aacs 0 bd+ 0
0m 11.89s: got discinfo
0m 11.95s: got bdmv
0m 24.93s: got extended bdinfo
0m 24.93s: opened blu-ray


DVDFab 8.0.8.5 (2012/02/15 17:11:51)



DVDFab 8.0.8.5 (2012/02/15 17:11:59)

0m 01.07s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 10.35s: detected blu-ray
0m 10.35s: drive E
0m 10.35s: blu-ray type 1
0m 10.35s: volume label HARRY_POTTER_7_PART_2
0m 21.32s: root 404EA06E________HARRY_POTTER_7_PART_2:HARRY_POTTER _7_PART_2:HARRY_POTTER_7_PART_2:HARRY_POTTER_7_PAR T_2
0m 21.70s: aacs 0 bd+ 0
0m 21.70s: got discinfo
0m 21.74s: got bdmv
0m 34.67s: got extended bdinfo
0m 34.67s: opened blu-ray
1m 19.51s:


------ begin mobile work(1/1) ------


1m 19.51s: create config(5)
1m 19.51s: convert profile(avi.xvid.ac3)
1m 19.51s: blu-ray playlist(0) angle(0) chapter(1->29)
1m 19.51s: stream(4113,AVC,1) stream(4352,DTS-HD MA,1) stream(4608,PGS,8)
1m 19.52s: info: set output video frame_rate(24000/1001)
1m 19.52s: subpicture preset(2), mode(2)
1m 19.56s: processing source(00004.m2ts)
1m 19.56s: try to use gpu acceleration(2) for video decoding
1m 19.56s: DXVA GPU acceleration for video decoding enabled
1m 21.62s: subpicture(4608) mode(2)
8m 15.58s: processing source(00015.m2ts)
9m 09.62s: processing source(00009.m2ts)