BD Ripper (3D Plus) v8.1.9.8 Bluray Ripper (MKV: audio out-of-sync)

[Yali]

I get Out-Of-Sync during a Blu-ray Rip and its annoying.
The Profile is MKV.H264.AudioCopy

DVDFab 8.1.9.8 (2012/07/28 19:35:02)

0m 02.38s: GPUAccelerate: 455
0m 02.38s: CUDA cap: 0
0m 02.38s: Support coreavc decode: 0
0m 02.38s: Graphics info: AMD Radeon HD 6800 Series : :
0m 02.44s: Qt Translator file load success
0m 02.73s: Load config successful.
0m 02.88s: Init profile data driver sucessful.
0m 08.20s: Init GPU settings sucessful.
0m 08.20s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 08.20s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 08.62s: Config ExBar successful.
0m 08.62s: dvd2dvd have 8 elements.
0m 08.76s: dvd2mobile have 29 elements.
0m 09.60s: blu-ray2blu-ray have 4 elements.
0m 09.64s: blu-ray2mobile have 18 elements.
0m 10.15s: blu-ray23d have 7 elements.
0m 10.32s: blu-ray2dvd have 1 elements.
0m 10.35s: file2mobile have 28 elements.
0m 11.13s: file2dvd have 1 elements.
0m 11.15s: file2bluray have 1 elements.
0m 11.54s: Config work ui controls successful.
0m 24.00s: Init burn engine successful.
0m 24.13s: StartNotify successful.
0m 24.13s: opening drive D
0m 24.14s: got media type 15
0m 24.53s: got max lba 14357951
0m 25.27s: type Blu-ray BDMV
0m 25.27s: volume label POSEIDON
0m 25.27s: opening drive E
0m 25.27s: failed to detect media type
0m 25.27s: got max lba 0
0m 25.33s: aacs 1 bd+ 0
0m 30.72s: Java protection is removed by StealthyClone anti-protection.
0m 30.76s: got discinfo
0m 32.28s: got bdmv
0m 32.29s: Vendor: Optiarc
0m 32.29s: Product: BD RW BD-5300S
0m 32.29s: Revision: 2.03
0m 32.29s: Vendor specific: 2012/02/07 11:25
0m 32.29s: AACS version: 1
0m 32.31s: Number of concurrent AGIDs: 2
0m 32.31s: Supports bus encryption: YES
0m 32.31s: Supports binding nonce generation: YES
0m 32.31s: Supports Hybrid discs: NO
0m 32.31s: got agid 0
0m 32.37s: sent host cert chal
0m 32.37s: got drive cert chal
0m 32.37s: BEC 1
0m 32.37s: DRIVE_VENDOR 0x0080
0m 32.45s: got drive key
0m 33.35s: got host key signature
0m 33.37s: verified drive signature
0m 33.37s: verified host signature
0m 33.45s: sent host signature and key point
0m 33.45s: got bus key
0m 33.45s: got agid 0
0m 33.51s: sent host cert chal
0m 33.52s: got drive cert chal
0m 33.52s: BEC 1
0m 33.52s: DRIVE_VENDOR 0x0080
0m 33.60s: got drive key
0m 33.60s: got host key signature
0m 33.60s: verified drive signature
0m 33.60s: verified host signature
0m 33.68s: sent host signature and key point
0m 33.68s: got bus key
0m 35.96s: got volume id
0m 35.96s: got volume id mac
0m 35.96s: volume id is correct
0m 35.96s: got vid
0m 37.84s: blu-ray 95DB683DB3903323CEA7C3DE6C6A8B222D31D051
0m 38.31s: cert BEE=0x00 same
0m 38.98s: D 3928BF6B
0m 38.98s: got vuk
0m 39.00s: got agid 0
0m 39.05s: sent host cert chal
0m 39.06s: got drive cert chal
0m 39.06s: BEC 1
0m 39.06s: DRIVE_VENDOR 0x0080
0m 39.14s: got drive key
0m 39.14s: got host key signature
0m 39.14s: verified drive signature
0m 39.14s: verified host signature
0m 39.22s: sent host signature and key point
0m 39.22s: got bus key
0m 39.23s: got data key
0m 39.55s: got unit key 1
0m 44.57s: got extended bdinfo
0m 44.57s: opened blu-ray
0m 47.95s: WorkAttr::Init Start
0m 48.00s: WorkAttr::Init OK: mkv.remux
0m 29.69s: WorkAttr::Init Start
0m 29.74s: WorkAttr::Init OK: mkv.h264.audiocopy
0m 05.58s:


------ begin mobile work(1/1) ------


0m 16.26s: info: create config(5)
0m 16.26s: info: convert profile(mkv.h264.audiocopy)
0m 16.26s: info: bluray playlist(100),angle(0),chapter(1->23),3D(0)
0m 16.26s: info: streams((4113.2)(4352.1)(4609.16)(4620.16)(4621.16 )(4622.16)(4623.16))
0m 16.27s: info: set output video frame_rate(24000/1001)
0m 16.27s: info: subpicture preset(2), mode(10)
0m 16.27s: info: subpicture preset(2), mode(10)
0m 16.27s: info: subpicture preset(2), mode(10)
0m 16.27s: info: subpicture preset(2), mode(10)
0m 16.28s: info: subpicture preset(2), mode(10)
0m 16.28s: try to use gpu acceleration(2) for video decoding
0m 16.28s: DXVA GPU acceleration for video decoding enabled
0m 17.29s: info: h264_encode: encode param profile(2) level(51) bitrate(4789)
0m 21.31s: info: processing source(00000.m2ts)
0m 25.25s: try to use gpu acceleration(2) for video decoding
0m 25.25s: DXVA GPU acceleration for video decoding enabled
0m 25.27s: info: h264_encode: encode param profile(2) level(51) bitrate(4789)
0m 40.27s: subpicture(4609) mode(10)
0m 42.27s: info: processing source(00000.m2ts)
0m 20.59s:

------ finish mobile work ------

My computer specs:

AMD FX 8120
Radeon 6870 (CrossFire)
ASUS M5A99FX PRO R2.0 (BIOS v0601)

[CBR929]

Hi Yali
Open Fab click the Click the Green √ at top right corner of the DVD Fab screen, and open Common Settings > General >A/V Codec, put a check in Disable all GPU codes and make sure they are set to Software, restart Fab and try again.


Hope this helps
CBR929

[pgodden]

Hi Yali
Open Fab click the Click the Green √ at top right corner of the DVD Fab screen, and open Common Settings > General >A/V Codec, put a check in Disable all GPU codes and make sure they are set to Software, restart Fab and try again.


Hope this helps
CBR929

I see this on a lot of occassions as a fix for various issues, what is the purpose of the GPU codes in the first place and would it be wrong to just turn them off permanently regardless?

[CBR929]

I see this on a lot of occassions as a fix for various issues, what is the purpose of the GPU codes in the first place and would it be wrong to just turn them off permanently regardless?

Hi pgodden
It seems some members have problems using the NVidia GPU codes and others do not.
If you do use them, you should always make sure that the drivers for your card are up to date.

I do not use the GPU settings because I do not have a high end card, and am happy using the software settings.

I usually let my conversions run over night, so I'm in no hurry for it to finish while I'm sleeping.
CBR929

[pgodden]

Hi pgodden
It seems some members have problems using the NVidia GPU codes and others do not.
If you do use them, you should always make sure that the drivers for your card are up to date.

I do not use the GPU settings because I do not have a high end card, and am happy using the software settings.

I usually let my conversions run over night, so I'm in no hurry for it to finish while I'm sleeping.
CBR929

thanks for the reply, I was curious

[Yali]

[8.2.0.8] Causes out-of-sync

[B]WITH GPU DECODING/ENCODING![/B]

DVDFab 8.2.0.8 (2012/09/05  22:38:03)

 0m 00.99s: GPUAccelerate: 7
 0m 00.99s: CUDA cap: 0
 0m 00.99s: Support coreavc decode: 0
 0m 00.99s: Graphics info: AMD Radeon HD 6800 Series :  : 
 0m 01.02s: Qt Translator file load success 
 0m 01.13s: Load config successful.
 0m 01.34s: Init profile data driver sucessful.
 0m 05.81s: Init GPU settings sucessful.
 0m 05.81s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
 0m 05.81s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
 0m 06.16s: Config ExBar successful.
 0m 06.16s: dvd2dvd have 8 elements.
 0m 06.35s: dvd2mobile have 31 elements.
 0m 07.28s: blu-ray2blu-ray have 4 elements.
 0m 07.31s: blu-ray2mobile have 20 elements.
 0m 07.90s: blu-ray23d have 7 elements.
 0m 08.07s: blu-ray2dvd have 1 elements.
 0m 08.10s: file2mobile have 30 elements.
 0m 09.01s: file2dvd have 1 elements.
 0m 09.03s: file2bluray have 1 elements.
 0m 09.42s: Config work ui controls successful.
 0m 11.34s: Init burn engine successful.
 0m 11.39s: StartNotify successful.
 0m 11.39s: opening drive D
 0m 11.39s: got media type 2
 0m 11.40s: got max lba 263871
 0m 11.41s: opening drive E
 0m 11.41s: failed to detect media type
 0m 11.42s: got max lba 0
 0m 22.63s: opening iso C:/xxxxxxxxxx
 0m 22.66s: got media type 4
 0m 22.68s: got max lba 1817679
 0m 22.69s: type DVD-VIDEO
 0m 22.69s: volume label DVD
 0m 24.61s: got copyright 0 0
 0m 24.63s: got udf/iso
 0m 24.68s: got discinfo
 0m 24.68s: pathplayer enabled
 0m 27.55s: got dvdinfo
 0m 27.55s: opened dvd
 0m 29.43s: WorkAttr::Init Start 
 0m 29.48s: WorkAttr::Init OK: generic.avi.xvid.audiocopy
 1m 23.76s: WorkAttr::Init Start 
 1m 23.82s: WorkAttr::Init OK: generic.mkv.h264.audiocopy
 1m 42.23s: WorkAttr::Init Start 
 1m 42.28s: WorkAttr::Init OK: generic.mkv.h264.mp3
 4m 22.63s: 


------  begin mobile work(1/1)  ------


 4m 22.63s: info: create config(0)
 4m 22.63s: info: convert profile(generic.mkv.h264.mp3)
 4m 22.63s: info: dvd playlist(1),angle(0),chapter(1->9),3D(0)
 4m 22.64s: info: streams((480.2)(128.2))
 4m 22.64s: info: set output video frame_rate(25/1)
 4m 23.70s: info: h264_encode: encode param profile(1) level(31) bitrate(4500)
 4m 28.77s: filter:503.01
 4m 28.77s: fifo:14d4-503.16-0-1,block:0
 4m 28.77s: filter:503.03
 4m 28.77s: filter:503.40
 4m 28.78s: fifo:14d4-503.16-1-2,block:0
 4m 28.78s: filter:503.16
 4m 28.78s: fifo:14d4-503.21-0-1,block:0
 4m 28.78s: filter:503.21
 4m 28.78s: fifo:14d4-503.03-0-1,block:0
 4m 28.79s: filter:dvd_demux
 4m 28.79s: fifo:14d4-503.01-0-1,block:0
 4m 28.79s: fifo:14d4-503.40-1-2,block:0
 4m 33.82s: ------ cancel all mobile work -------
 4m 46.84s: 


------  begin mobile work(1/1)  ------


 4m 46.84s: info: create config(0)
 4m 46.84s: info: convert profile(generic.mkv.h264.mp3)
 4m 46.84s: info: dvd playlist(1),angle(0),chapter(1->9),3D(0)
 4m 46.85s: info: streams((480.2)(128.2))
 4m 46.85s: info: set output video frame_rate(25/1)
 4m 47.88s: info: h264_encode: encode param profile(1) level(31) bitrate(4500)
15m 15.19s: info: h264_encode: encode param profile(1) level(31) bitrate(4500)
26m 31.31s: audio_encode finish job
26m 38.65s: 


------  finish mobile work  ------


[B]REMOVED THE GPU OPTION IN DVDFAB![/B]


DVDFab 8.2.0.8 (2012/09/05  23:59:16)

 0m 00.69s: GPUAccelerate: 7
 0m 00.69s: CUDA cap: 0
 0m 00.69s: Support coreavc decode: 0
 0m 00.70s: Graphics info: AMD Radeon HD 6800 Series :  : 
 0m 00.70s: Qt Translator file load success 
 0m 00.75s: Load config successful.
 0m 00.84s: Init profile data driver sucessful.
 0m 03.21s: Init GPU settings sucessful.
 0m 03.22s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
 0m 03.22s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
 0m 03.47s: Config ExBar successful.
 0m 03.47s: dvd2dvd have 8 elements.
 0m 03.62s: dvd2mobile have 31 elements.
 0m 04.56s: blu-ray2blu-ray have 4 elements.
 0m 04.59s: blu-ray2mobile have 20 elements.
 0m 05.20s: blu-ray23d have 7 elements.
 0m 05.37s: blu-ray2dvd have 1 elements.
 0m 05.40s: file2mobile have 30 elements.
 0m 06.31s: file2dvd have 1 elements.
 0m 06.33s: file2bluray have 1 elements.
 0m 06.72s: Config work ui controls successful.
 0m 08.07s: Init burn engine successful.
 0m 08.17s: StartNotify successful.
 0m 08.18s: opening drive D
 0m 08.18s: got media type 2
 0m 08.19s: got max lba 263871
 0m 08.20s: opening drive E
 0m 08.20s: failed to detect media type
 0m 08.20s: got max lba 0
 0m 38.36s: opening iso C:/xxxxxxxx
 0m 38.36s: got media type 4
 0m 38.36s: got max lba 1817679
 0m 38.36s: type DVD-VIDEO
 0m 38.37s: volume label DVD
 0m 38.39s: got copyright 0 0
 0m 38.39s: got udf/iso
 0m 38.40s: got discinfo
 0m 38.40s: pathplayer enabled
 0m 38.44s: got dvdinfo
 0m 38.44s: opened dvd
 0m 39.31s: WorkAttr::Init Start 
 0m 39.36s: WorkAttr::Init OK: generic.mkv.h264.audiocopy
 0m 42.90s: WorkAttr::Init Start 
 0m 42.95s: WorkAttr::Init OK: generic.mkv.h264.mp3
 3m 00.38s: 


------  begin mobile work(1/1)  ------


 3m 00.39s: info: create config(0)
 3m 00.39s: info: convert profile(generic.mkv.h264.mp3)
 3m 00.39s: info: dvd playlist(1),angle(0),chapter(1->9),3D(0)
 3m 00.39s: info: streams((480.2)(128.2))
 3m 00.40s: info: set output video frame_rate(25/1)
 3m 01.42s: info: h264_encode: encode param profile(1) level(31) bitrate(4700)
13m 32.89s: info: h264_encode: encode param profile(1) level(31) bitrate(4700)
25m 10.46s: audio_encode finish job
25m 13.22s: 


------  finish mobile work  ------

Tried both solutions and none of them helped.... so is there a faulty update, is this going to be fixed?

[signals]

Yali
You are not using the latest version, please update to v8.2.0.9 Beta or whatever is the latest. Set the framerate to "same as source" if not aleady. If the ISO was not made by DVDFab, please try the original disc as the Source.