BD Ripper (3D Plus) Godzilla 3D Blu Ray audio out of sync

[FMAChet]

Hey,

I noticed an error with the audio with the 3d Blu Ray of Godzilla with the audio out of sync about a second or two. I compared some scenes with videos on Youtube to confirm it. I upgraded DVD fab to 9.1.6.8, and the problem remains when I ripped a chapter of it instead of the whole thing just to test it.

Output format was Ipad Air, Tried three times with English DTS-HD Master/7.1, and tried the fourth with English AC-3/5.1. I cant upload the internal log due to exceeding the forum's limit, sorry.

"Your file of 755.8 KB bytes exceeds the forum's limit of 683.6 KB for this filetype."

If there is another way to display the log, please inform me.

If anyone could help me with this, I would greatly appreciate it. Thanks for your time.

[CBR929]

Hi FMAChet
Open the internal log folder, copy and paste only the relevant part of the log, your most recent attempts will be at the end of the log.
CBR929

[FMAChet]

DVDFab 9.1.6.8 (2014/10/03 22:56:41)

0m 00.01s: Init Public log : enabled.
0m 00.01s: Init Private log : finish.
0m 00.01s: App info: 2014-9-13
0m 00.01s: App info: 9.1.6.8 9168 Official
0m 00.01s: Init CrashReportSettings : disabled.
0m 00.01s: Init DVDInfo_Log : enabled.
0m 00.01s: Init Qt_Log : disabled.
0m 00.15s: Profile Manager :: Begin Load Profile
0m 00.15s: Qt Translator file load success
0m 00.15s: App info: client type 2.
0m 00.17s: Fabplay load: preload successful.
0m 00.23s: Fabplay load: Load successful.
0m 00.23s: Init process: Transfer settings successful.
0m 00.23s: info: fabcheck logpath= C:/Users/Susan Green/Documents/DVDFab9/Log/
0m 01.85s: info: fab_check_gpu is running ...
0m 13.38s: Profile Manager :: End Load Profile
0m 03.97s: Profile Manager :: End Load Profile
0m 20.17s: info: recommand= 0, Shrink support= 0, enable= 0, cuda_cap= 0 , cpu_count= 8
0m 20.17s: GPU check: GPUAccelerate-0
0m 20.17s: GPU check: GPUAccelerate setting-0, 0
0m 20.17s: GPU check: CUDA cap-0
0m 20.17s: GPU check: Support coreavc decode-0
0m 20.17s: GPU check: Lighting shrink status-0, 0
0m 20.17s: Init process: Load config successful.
0m 20.20s: Init process: Windows os type is 64bit System Windows 7.
0m 20.20s: Init process: command line in is
0m 11.40s: info: fab_check_gpu run successful
0m 11.40s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 0 , cpu_count= 8
0m 11.40s: GPU check: GPUAccelerate-864317
0m 11.40s: GPU check: GPUAccelerate setting-851968, 851968
0m 11.40s: GPU check: CUDA cap-0
0m 11.40s: GPU check: Support coreavc decode-0
0m 11.40s: GPU check: Lighting shrink status-1, 1
0m 11.40s: GPU check: Graphics info 1: Intel(R) HD Graphics 4000 : 8.15.10.2712 :
0m 11.40s: GPU check: Graphics info 2: NVIDIA GeForce GT 630M : 8.17.12.9555 : 2.1
0m 11.40s: Init process: Load config successful.
0m 11.40s: Init process: Windows os type is 64bit System Windows 7.
0m 11.40s: Init process: command line in is
0m 11.40s: Init process: there is another app running and exit.
0m 29.60s: Reg check: Option check status-Failed
0m 29.60s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:0:0 )-( DVD to Mobile:0:0 )-( Blu-ray to Blu-ray:0:0 )-( Blu-ray to Mobile:0:0 )-( File to Mobile:0:0 )-( Blu-ray to DVD:0:0 )-( File to DVD:0:0 )-( File to Blu-ray:0:0 )-( File Mover:1:0 )-( Blu-ray to 3D:0:0 )-( 2D to 3D:0:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 29.60s: App info: language type ENU.
0m 29.60s: Reg check: Start get sys number.
0m 29.60s: Reg check: Serial number is: 24-ec-99-53-d9-3c:00-26-6c-29-c0-75:24-ec-99-53-d9-3c
0m 29.60s: Reg check: Connect type is: 0
0m 31.48s: Reg check: Times of connecting error is: 0
0m 31.48s: Reg check: Parse string: ( 11:1420460196 )( 50:1420460196 )( 21:1443866726 )( 22:1443866726 )( 1:0 )( 2:0 )( OV:9168 )( BV:9169 )( S:f485efd6e2e8818d5a59476e133df54a
0m 31.79s: Reg check: thread exit normal.
0m 31.82s: Reg check: Option check status-NewWork
0m 31.82s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:0:0 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:0 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:0 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 31.82s: Reg check: connect successful and result code is 1.
0m 31.82s: Reg check: End check info.
0m 31.98s: Export Blu-ray source information report : enabled
0m 32.49s: Init process: Init GPU settings successful.
0m 32.97s: Init preview: Begin init preview play engine.
0m 32.97s: Init preview: Begin init preview play engine(Internal).
0m 41.29s: Init preview: Init internal engine successful.
0m 54.19s: Burn engine: start init.
0m 54.19s: Burn engine: set log folder.
0m 54.19s: DVD: init read settings.
0m 54.19s: DVD: init write settings.
0m 54.23s: BD: init read settings.
0m 54.23s: BD: init write settings.
0m 54.23s: bd set region B
0m 54.23s: Burn engine: config engine type-0 begin.
0m 54.23s: Burn engine: config engine type-0 end.
0m 54.23s: Burn engine: writer count 1.
0m 54.23s: Burn engine: 0- D:\ [MATSHITA BD-MLT UJ260B 1.60 (Ide)].
0m 54.23s: Burn engine: end init.
0m 57.36s: Init process: Init setting page successful.
0m 57.36s: QtLog Mode = false
0m 57.36s: Show ProductsInfo Dlg 2
1m 07.98s: Show UI Step 2
1m 08.32s: Show UI Step 3
1m 08.32s: Start show MainUI.
1m 08.32s: UI manager: switch to Converter mode.
1m 11.57s: allow_test : false
1m 11.66s: Init process: init main ui successful.
1m 12.28s: Init process: show main ui successful.
1m 12.28s: DriveX msg: Init driveX D with I/O mode: 0
1m 12.28s: opening drive D
1m 12.28s: opened i/o
1m 12.28s: got media type 15
1m 16.78s: got max lba 21844703
1m 19.28s: got disc type 20
1m 19.28s: type Blu-ray BDMV
1m 19.28s: volume label GODZILLA
1m 19.28s: DriveX msg: add media in driveX D.
1m 19.28s: DriveX msg: send open media msg to thread for driveX D.
1m 19.28s: opening drive D
1m 19.28s: opened i/o
1m 19.29s: got media type 15
1m 19.94s: got max lba 21844703
1m 21.13s: got disc type 20
1m 21.13s: type Blu-ray BDMV
1m 21.13s: volume label GODZILLA
1m 21.17s: Source managerpen source flag:1,1,1,1
1m 21.17s: Source managerpen source flag:1,1,1,1
1m 21.17s: Source manager: add source id 0.
1m 21.18s: bd set region ?
1m 21.19s: Source open statusVD Yes, 2015-1-5
1m 21.19s: Source open status:BD Yes, 2015-10-3
1m 21.19s: bd set region ?
1m 21.19s: internal path D:/BDMV/
1m 21.19s: aacs 1 bd+ 0
1m 21.84s: got bdmv
1m 21.87s: movie name: godzilla
1m 21.87s: got agid 3
1m 21.94s: sent host cert chal
1m 21.94s: got drive cert chal
1m 21.94s: BEC 1
1m 21.94s: DRIVE_VENDOR 0x0001
1m 22.01s: got drive key
1m 22.01s: got host key signature
1m 22.01s: verified drive signature
1m 22.02s: verified host signature
1m 22.12s: sent host signature and key point
1m 22.12s: got bus key
1m 22.12s: got volume id
1m 22.12s: got volume id mac
1m 22.13s: volume id is correct
1m 22.13s: got vid
1m 22.33s: blu-ray 2EAF24133A41C57ABDA43E92C7333C0D8B842191
1m 22.86s: cert BEE=0x00 same
1m 25.17s: D 26ED2908
1m 25.17s: main playlist 00098.mpls
1m 25.17s: selected region B
1m 25.17s: bd set region B
1m 25.18s: got vuk
1m 25.38s: got unit key 1
1m 28.19s: got bdmv
1m 31.43s: got extended bdinfo
1m 31.43s: opened blu-ray
1m 31.52s: Source manager: open successful.
1m 33.33s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 98 ).
1m 44.62s: ========WorkAttr::SetSource=======
1m 48.90s: Source Video Size Original : 1920 x 800
1m 48.90s: Source Video Size Display : 1920 x 800
1m 48.91s: Source Video FPS : 24000 / 1001
1m 48.91s: Source Video Bitrate : 1200
1m 48.92s: Source Audio Bitrate : 0
1m 48.92s: Source Audio Channels : 8
1m 48.92s: Source Audio Volume : 100
1m 48.92s: Work Profile : iPad Air
1m 50.39s: DataDriven:GetBitPixelConfig[h264] min=120.
1m 50.39s: DataDriven:GetBitPixelConfig[h264] max=200.
1m 50.41s: DataDriven:GetBitPixelConfig[h264] min=120.
1m 50.41s: DataDriven:GetBitPixelConfig[h264] max=200.
1m 50.42s: DataDriven:GetBitPixelConfig[h264] min=120.
1m 50.42s: DataDriven:GetBitPixelConfig[h264] max=200.
1m 50.44s: Source managerpen source flag:1,1,1,1
2m 10.60s: DataDriven:GetBitPixelConfig[h264] min=120.
2m 10.61s: DataDriven:GetBitPixelConfig[h264] max=200.
2m 10.64s: DataDriven:GetBitPixelConfig[h264] min=120.
2m 10.65s: DataDriven:GetBitPixelConfig[h264] max=200.
2m 13.58s: DataDriven:GetBitPixelConfig[h264] min=120.
2m 13.58s: DataDriven:GetBitPixelConfig[h264] max=200.
2m 13.60s: DataDriven:GetBitPixelConfig[h264] min=120.

[rmeyers]

Go to Common Settings, and look under the A/V Codec tab.

I always have "Disable all GPU codecs for decoding and encoding" checked, and the boxes beside Lightning-Recording and Lightning-Shrink unchecked.

CPU only gives the best results.

[FMAChet]

A few things you could try:
Update to fab version 9169
Update your quick sync driver your using Intel(R) HD Graphics 4000 : 8.15.10.2712 :
I believe we are on version 3621 last 4 digits of newer driver.
Here is a auto updater to download from Intel it will check to see what you have and if a new driver is out for your system it will download and install it for you.http://www.intel.com/p/en_US/support/detect
If these don't help go into gpu settings in Fab settings and select by checking the small box saying use all software and retry.
Hope this helps.

Unfortunately, I have already tried updating DVDfab, but the result is the same. And I'm hesitant of tinkering around with the Intel with the possibly of screwing up my computer. The scan is interrupted by possible internet capability, firewall or installation issue. Is there an alternative solution I could use that doesn't involve methods like updating my intel?

Go to Common Settings, and look under the A/V Codec tab.

I always have "Disable all GPU codecs for decoding and encoding" checked, and the boxes beside Lightning-Recording and Lightning-Shrink unchecked.

CPU only gives the best results.

I tried that too, it didn't work I'm sorry to say.

[Joe747]

FMACHET: Your not using the 3d blu ray if you were your logs would read Godzilla 3d as my logs do.All the ipads seem to use mp4s with 2 channel sound so maybe try a different profile as it's possible you changed something in the settings for ipad air.I used the default settings with ipad air with the 3d Godzilla disk and had no audio problem you are using the 2d disk.

[FMAChet]

Sorry for the late reply, I am sure that I was ripping the 3d version of the movie, I don't know why it didn't listed it as 3d. What I am trying to do is make a 2d copy of the 3d version due to the horrendous lighting of the 2d version for both my ipad and my PS3.

I have tried updating my Intel again, but it is already up to date, other than that, there is nothing I can do about it. If anyone could suggest any methods with dealing with this problem, I would be grateful.

Again, apologies for the late reply.

[signals]

You can save the log sessions to a new text file and use the Manage Attachments button below the post editing window to attach them to a post, much easier to read and for the developers to download.

[FMAChet]

Unfortunately, the file is too big when I tried attaching it,

"Your file of 65.2 KB bytes exceeds the forum's limit of 55.3 KB for this filetype."

I'm sorry, but posting it to the thread was the only option I could resort. Is there any there way to post it?

[FMAChet]

I split the files in half so they meet up to the recommendations of the forums. Sorry for the double posts, but here's the log sessions.