DVD Ripper The Loft Rip

[Rudyman]

Won't rip. Case says DTS audio, Dolby 5.1, comes up as AC3/2 Frame Rate is 29 fps, suspect it isn't. Log below;


DVDFab 9.2.0.2 (2015/06/12 20:33:30)

0m 00.01s: Init Public log : enabled.
0m 00.02s: Init Private log : finish.
0m 00.02s: App info: 2015-6-10
0m 00.02s: App info: 9.2.0.2 9202 Official
0m 00.02s: Init CrashReportSettings : enabled.
0m 00.02s: Init DVDInfo_Log : enabled.
0m 00.03s: Init Qt_Log : disabled.
0m 00.09s: Profile Manager :: Begin Load Profile
0m 00.09s: Qt Translator file load success
0m 00.09s: App info: client type 2.
0m 00.10s: MobilePlay load: preload successful.
0m 03.18s: Init preview: Init internal engine successful.
0m 00.16s: MobilePlay load: Load successful.
0m 00.17s: Init process: Transfer settings successful.
0m 00.17s: info: check logpath= d:/Users/Darrell/Documents/DVDFab9/Log/
0m 00.17s: info: _check_gpu is running ...
0m 00.29s: info: check_gpu run successful
0m 00.29s: info: recommand= 8248, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 00.29s: GPU check: GPUAccelerate-12351
0m 00.30s: GPU check: GPUAccelerate setting-8248, 8248
0m 00.30s: GPU check: CUDA cap-1
0m 00.30s: GPU check: Support coreavc decode-0
0m 00.30s: GPU check: Lighting shrink status-1, 1
0m 00.30s: GPU check: Graphics info 1: NVIDIA GeForce GTX 760 : 9.18.13.5306 : 3.0
0m 00.31s: Init process: Load config successful.
0m 00.31s: Init process: Windows os type is 64bit System Windows 7.
0m 00.31s: Init process: command line in is
0m 00.31s: bTimeoutReturn=0
0m 00.32s: Init process: there is another app running and exit.
0m 03.66s: Burn engine: start init.
0m 03.66s: Burn engine: set log folder.
0m 03.66s: DVD: init read settings.
0m 03.66s: DVD: init write settings.
0m 03.66s: DVD: DVDInfo_SetDvdrBlocks size = 2201600
0m 03.67s: DVD: after DVDInfo_SetDvdrBlocks
0m 00.72s: Profile Manager :: End Load Profile
0m 03.77s: DVD: after SetBurnEngine, Burn Type = 0
0m 03.77s: DVD: after init write settings.
0m 03.77s: DVD: finish init write settings.
0m 03.77s: BD: init read settings.
0m 03.77s: BD: init write settings.
0m 03.78s: bd set region A
0m 03.78s: Burn engine: config engine type-0 begin.
0m 03.78s: Burn engine: config engine type-0 end.
0m 03.78s: Burn engine: writer count 1.
0m 03.78s: Burn engine: 0- E:\ [HL-DT-ST BD-RE BH14NS40 1.00 (Ide)].
0m 03.79s: Burn engine: end init.
0m 04.18s: Init process: Init setting page successful.
0m 04.19s: QtLog Mode = false
0m 04.19s: Show UI Step 2
0m 04.44s: Show UI Step 3
0m 04.45s: Start show MainUI.
0m 04.45s: UI manager: switch to Converter mode.
0m 05.36s: Init process: init main ui successful.
0m 05.62s: Plugin Info : 1 exits flag = false plugin path = C:/Program Files (x86)/DVDFab 9/Plugins\VideoDownload.xml
0m 05.66s: Init process: show main ui successful.
0m 05.66s: DriveX msg: Init driveX E with I/O mode: 0
0m 05.69s: opening drive E
0m 05.69s: opened i/o
0m 05.69s: got media type 4
0m 05.98s: got max lba 2247488
0m 05.98s: got disc type 10
0m 06.02s: type DVD-VIDEO
0m 06.02s: volume label THE_LOFT
0m 06.03s: DriveX msg: add media in driveX E.
0m 06.03s: DriveX msg: send open media msg to thread for driveX E.
0m 13.47s: opening drive E
0m 13.47s: opened i/o
0m 13.47s: got media type 4
0m 13.75s: got max lba 2247488
0m 13.76s: got disc type 10
0m 13.80s: type DVD-VIDEO
0m 13.80s: volume label THE_LOFT
0m 13.80s: Source managerpen source flag:1,1,1,1,1
0m 13.81s: Source managerpen source flag:1,1,1,1,1
0m 13.81s: Source manager: add source id 0.
0m 13.81s: Source open statusVD Yes, 2231-10-11
0m 13.82s: Source open status:BD Yes, 2231-10-11
0m 13.82s: internal path E:/VIDEO_TS/
0m 13.83s: got copyright 1 fe
0m 13.83s: key method 0
0m 15.37s: got udf/iso
0m 15.37s: init disc file system: 279 - 299
0m 16.03s: got discinfo
0m 16.03s: pathplayer enabled
0m 23.19s: got dvdinfo
0m 23.20s: opened dvd
0m 23.37s: Source manager: open successful.
0m 23.45s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 0 ).
0m 46.14s: ========WorkAttr::SetSource=======
0m 46.14s: Source Video Size Original : 720 x 301
0m 46.14s: Source Video Size Display : 854 x 358
0m 46.14s: Source Video FPS : 30000 / 1001
0m 46.15s: Source Video Bitrate : 1200
0m 46.15s: Source Audio Bitrate : 192000
0m 46.15s: Source Audio Channels : 2
0m 46.15s: Source Audio Volume : 100
0m 46.15s: Work Profile : MP4
0m 46.32s: Source managerpen source flag:1,1,1,1,1

[ming]

DTS is not supported in the MP-4 container it only supports AC-3.MKV will work.

[signals]

Rudyman

You seem to have more than one instance of DVDFab running. Try using only one and see if you get better results. I do not have the disc you are using yet, but some of the log entries are odd. I'll try it as well when the disc arrives. Check your selections on the Advanced Settings page of Ripper, DVDFab won't allow you to make choices that are not supported.

[Rudyman]

Thank you for getting back to me, Tried after reboot, no change, tried changing to MKV container, no go, seems to not scan right when the disk is inserted.

[Rudyman]

Also tried disabling Pathplayer, no change.

[Wilson.Wang]

Hi,

Would you please post the current conversion log file?

Wilson

[Rudyman]

DVDFab 9.2.0.2 (2015/06/15 17:33:55)

0m 00.17s: Init Public log : enabled.
0m 00.17s: Init Private log : finish.
0m 00.17s: App info: 2015-6-10
0m 00.17s: App info: 9.2.0.2 9202 Official
0m 00.20s: Init CrashReportSettings : enabled.
0m 00.20s: Init DVDInfo_Log : enabled.
0m 00.21s: Init Qt_Log : disabled.
0m 00.54s: Profile Manager :: Begin Load Profile
0m 00.56s: Qt Translator file load success
0m 00.67s: App info: client type 2.
0m 00.68s: MobilePlay load: preload successful.
0m 00.73s: MobilePlay load: Load successful.
0m 00.74s: Init process: Transfer settings successful.
0m 00.74s: info: check logpath= d:/Users/Darrell/Documents/DVDFab9/Log/
0m 00.74s: info: _check_gpu is running ...
0m 00.93s: info: check_gpu run successful
0m 00.93s: info: recommand= 8248, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 00.93s: GPU check: GPUAccelerate-12351
0m 00.93s: GPU check: GPUAccelerate setting-8248, 8248
0m 00.95s: GPU check: CUDA cap-1
0m 00.95s: GPU check: Support coreavc decode-0
0m 00.95s: GPU check: Lighting shrink status-1, 1
0m 00.95s: GPU check: Graphics info 1: NVIDIA GeForce GTX 760 : 9.18.13.5306 : 3.0
0m 00.95s: Init process: Load config successful.
0m 00.95s: Init process: Windows os type is 64bit System Windows 7.
0m 00.95s: Init process: command line in is
0m 01.01s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( 1:0 )( OV:9202 )( BV:9197 )( S:bb0dcebbfa8da546ea572eea1ab4538e )
0m 01.02s: Reg check: Option check status-Local
0m 01.02s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( DVD to Blu-ray:0:0 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 01.02s: App info: language type ENU.
0m 01.02s: App info: Install path C:/Program Files (x86)/DVDFab 9/
0m 01.02s: Reg check: Start get sys number.
0m 01.02s: Export Blu-ray source information report : enabled
0m 01.02s: Reg check: Serial number is: bc-ae-c5-74-d2-fb
0m 01.04s: Reg check: Connect type is: 0
0m 01.04s: Init process: Init GPU settings successful.
0m 01.04s: connect plugin info : start.
0m 01.60s: Profile Manager :: End Load Profile
0m 01.96s: connect plugin info : 1:1
0m 02.12s: Reg check: Times of connecting error is: 0
0m 02.12s: Reg check: Parse string: ( S:331b8807687dd48ec1917bcbd5bcf418
0m 02.13s: Reg check: Option check status-NewWork
0m 02.13s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( DVD to Blu-ray:1:0 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 02.46s: Init preview: Begin init preview play engine.
0m 02.46s: Init preview: Begin init preview play engine(Internal).
0m 03.29s: Init preview: Init internal engine successful.
0m 03.72s: Burn engine: start init.
0m 03.72s: Burn engine: set log folder.
0m 03.72s: DVD: init read settings.
0m 03.72s: DVD: init write settings.
0m 03.73s: DVD: DVDInfo_SetDvdrBlocks size = 2201600
0m 03.73s: DVD: after DVDInfo_SetDvdrBlocks
0m 03.82s: DVD: after SetBurnEngine, Burn Type = 0
0m 03.83s: DVD: after init write settings.
0m 03.83s: DVD: finish init write settings.
0m 03.83s: BD: init read settings.
0m 03.83s: BD: init write settings.
0m 03.83s: bd set region A
0m 03.84s: Burn engine: config engine type-0 begin.
0m 03.84s: Burn engine: config engine type-0 end.
0m 03.84s: Burn engine: writer count 1.
0m 03.84s: Burn engine: 0- E:\ [HL-DT-ST BD-RE BH14NS40 1.00 (Ide)].
0m 03.84s: Burn engine: end init.
0m 04.21s: Init process: Init setting page successful.
0m 04.22s: QtLog Mode = false
0m 04.22s: Show UI Step 2
0m 04.47s: Show UI Step 3
0m 04.48s: Start show MainUI.
0m 04.48s: UI manager: switch to Converter mode.
0m 05.40s: Init process: init main ui successful.
0m 05.66s: Plugin Info : 1 exits flag = false plugin path = C:/Program Files (x86)/DVDFab 9/Plugins\VideoDownload.xml
0m 05.70s: Init process: show main ui successful.
0m 05.70s: DriveX msg: Init driveX E with I/O mode: 0
0m 05.77s: opening drive E
0m 05.77s: opened i/o
0m 05.78s: got media type 4
0m 05.89s: got max lba 2247488
0m 05.89s: got disc type 10
0m 05.93s: type DVD-VIDEO
0m 05.93s: volume label THE_LOFT
0m 05.94s: DriveX msg: add media in driveX E.
0m 05.94s: DriveX msg: send open media msg to thread for driveX E.
0m 13.49s: opening drive E
0m 13.50s: opened i/o
0m 13.50s: got media type 4
0m 13.58s: got max lba 2247488
0m 13.58s: got disc type 10
0m 13.62s: type DVD-VIDEO
0m 13.62s: volume label THE_LOFT
0m 13.63s: Source managerpen source flag:1,1,1,1,1
0m 13.63s: Source managerpen source flag:1,1,1,1,1
0m 13.63s: Source manager: add source id 0.
0m 13.64s: Source open statusVD Yes, 2231-10-11
0m 13.64s: Source open status:BD Yes, 2231-10-11
0m 13.64s: internal path E:/VIDEO_TS/
0m 13.65s: got copyright 1 fe
0m 13.66s: key method 0
0m 14.28s: got udf/iso
0m 14.29s: init disc file system: 279 - 299
0m 14.94s: got discinfo
0m 14.94s: pathplayer enabled
0m 21.22s: got dvdinfo
0m 21.22s: opened dvd
0m 21.39s: Source manager: open successful.
0m 21.48s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 0 ).
0m 44.21s: ========WorkAttr::SetSource=======
0m 44.22s: Source Video Size Original : 720 x 301
0m 44.22s: Source Video Size Display : 854 x 358
0m 44.22s: Source Video FPS : 30000 / 1001
0m 44.22s: Source Video Bitrate : 1200
0m 44.22s: Source Audio Bitrate : 192000
0m 44.22s: Source Audio Channels : 2
0m 44.23s: Source Audio Volume : 100
0m 44.23s: Work Profile : MP4
0m 44.39s: Source managerpen source flag:1,1,1,1,1
0m 58.07s: UILog:OnMsgToolbar_Start
0m 58.07s: UILog:Msg Start : ready start
0m 58.07s: UILog:Msg Start : start test run work
0m 58.08s: UILog:right button to null, work falg = -1
0m 58.11s: UILog:Msg Start : run work
0m 58.11s: UILog:Run current Work.
0m 58.11s: UILog:Begin work Converter.
0m 58.11s: UILog:Begin work copy or converter.
0m 58.12s: Start check DVD Ripper register status.
0m 58.12s: End check DVD Ripper register status: Enable
0m 58.12s: UILog:start running at thread.
0m 58.13s: UILog:return flag at start running at thread ok.
0m 58.15s: OPList at DVD Converter : (480.2),(128.2)
0m 58.15s: DVD Converter check watermark flag: 0
1m 17.12s: ------------------ convert work begin(1/1) ------------------
1m 17.12s: start process(1/1)
1m 17.13s: info: create config(dvd2video)
1m 17.13s: info: crop value after clone: left = 0 right= 0 top=60 bottom=62 enable=1 mode=1
1m 17.13s: info: use profile(MP4)
1m 17.37s: info: dvd playlist(1),angle(0),chapter(1->12)
1m 17.37s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
1m 17.73s: info: stream input@ Video(480)[codec(mpeg2video) size(720*480) fps(25000/1000) interlace(0) duration(6141)sec opcode(compress)]
1m 17.74s: info: perset file config OK !
1m 17.74s: info: set output video frame_rate(30000/1001)
1m 17.74s: info: stream output Video(480)[codec(h264) size(716*300) fps(30000/1001) interlace(0) bitrate(1295) duration(6141)sec]
1m 17.75s: info: stream input@ Audio(128)[codec(ac3) channels(2) sample(48000) bitrate(192000) bitdepth(16) opcode(compress)]
1m 17.75s: info: stream output Audio(128)[codec(aac) channels(2) sample(48000) bitrate(128000) bitdepth(16) opcode(compress)]
1m 17.76s: info: SubMode(Render) -- Display Only forced Subtitle(true)
1m 17.76s: UILog:MsgWork:WorkStatus_Start
1m 17.92s: info: ex process path= C:/Program Files (x86)/DVDFab 9/fabcore.exe
1m 17.96s: info: h264_encode: encode param profile(1) level(30) bitrate(-1) crf(22) interlace(0)

[signals]

Rudyman
We have been trying to duplicate your problem without success. The Region 1 US version of the disc works perfectly in DVD Ripper and DVD Copy. If you have a different version, please tell us which one or tell us where it was purchased.

[Rudyman]

ok, maybe my disk is bad, works in DVD player. It is US region 1 disk as well.
Spine # is 99534, and bar code is 371179953481
Trying to RIP out of an LG Bluray drive could be just not compatible.