BD Ripper (3D Plus) Ripping stops after 5 minutes - Unfinished Business

[jlsmith16]

I'm trying to rip a US version of Unfinished Business. The Bluray disk appears to load normally but when i begin the ripping process it either stops after 5 minutes and says the process was completed or an error message appears that says an error occurred while reading the disk. The disk is brand new so i know its not a corrupt disk. Log files are attached.

[90312]

You missed the needed log, dvdfab_internal.log please.

[jlsmith16]

I keep getting an error message that says that file is too large to upload. it is 13.5 MB..

[90312]

Don't need all of the logs just the last one, arrow down through the text and you'll see where they stop and start. just cut the last log and paste it.

[jlsmith16]

I seem to have the same problem with all 20th Century Fox movies.

The whole movie doesn't rip. Here is another example of the US version of the movie Wild. This time it only ripped the first 38 minutes.

Here is the log:

DVDFab 9.2.1.5 (2015/11/05 15:45:56)

0m 00.01s: Init Public log : enabled.
0m 00.01s: Init Private log : finish.
0m 00.03s: App info: 2015-9-28
0m 00.03s: App info: 9.2.1.5 9215 Official
0m 00.03s: Init CrashReportSettings : enabled.
0m 00.03s: Init DVDInfo_Log : enabled.
0m 00.03s: Init Qt_Log : disabled.
0m 00.12s: Profile Manager :: Begin Load Profile
0m 00.12s: Qt Translator file load success
0m 00.12s: App info: client type 2.
0m 00.12s: MobilePlay load: preload successful.
0m 00.18s: MobilePlay load: Load successful.
0m 00.18s: Init process: Transfer settings successful.
0m 00.18s: info: check logpath= C:/Users/User Name/Documents/DVDFab9/Log/
0m 00.34s: info: _check_gpu is running ...
0m 02.78s: Profile Manager :: End Load Profile
0m 03.19s: info: check_gpu run successful
0m 03.19s: info: recommand= 8248, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 03.19s: GPU check: GPUAccelerate-12351
0m 03.19s: GPU check: GPUAccelerate setting-8248, 8248
0m 03.19s: GPU check: CUDA cap-1
0m 03.19s: GPU check: Support coreavc decode-0
0m 03.19s: GPU check: Lighting shrink status-1, 1
0m 03.19s: GPU check: Graphics info 1: Intel(R) HD Graphics 4600 : 10.18.10.3368 : 7,5
0m 03.19s: GPU check: Graphics info 2: NVIDIA GeForce GT 740M : 10.18.13.5582 : 3.5
0m 03.20s: Init process: Load config successful.
0m 03.20s: Init process: Windows os type is 64bit System Windows 8.
0m 03.20s: Init process: command line in is
0m 03.24s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 50:8263532095 )( 20:8260762964 )( 21:8260762964 )( 22:8260762964 )( 91:1460083122 )( OV:9215 )( BV:9216 )( S:fe915cdf34801d2db3926cfeee7f4ac0 )
0m 03.24s: Reg check: Option check status-Local
0m 03.24s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:0:0 )-( DVD to Blu-ray:0:0 )-( File to DVD:0:0 )-( File to Blu-ray:0:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 03.25s: App info: language type ENU.
0m 03.25s: App info: Install path C:/Program Files (x86)/DVDFab 9/
0m 03.25s: Reg check: Start get sys number.
0m 03.25s: Export Blu-ray source information report : enabled
0m 03.25s: Reg check: Serial number is: 14-2d-27-72-fd-21:14-2d-27-72-fd-21:c4-34-6b-01-a8-0a
0m 03.25s: Reg check: Connect type is: 0
0m 03.28s: Init process: Init GPU settings successful.
0m 03.28s: connect plugin info : start.
0m 04.29s: Reg check: Times of connecting error is: 0
0m 04.29s: Reg check: Parse string: ( S:f3e3276957242f0d009e96dff7e5dc4c
0m 04.31s: Reg check: Option check status-NewWork
0m 04.31s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:0 )-( DVD to Blu-ray:1:0 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 04.48s: connect plugin info : 1:1
0m 04.82s: Init preview: Begin init preview play engine.
0m 04.82s: Init preview: Begin init preview play engine(Internal).
0m 04.98s: Init preview: Init internal engine successful.
0m 05.40s: Burn engine: start init.
0m 05.40s: Burn engine: set log folder.
0m 05.40s: DVD: init read settings.
0m 05.40s: DVD: init write settings.
0m 05.40s: DVD: DVDInfo_SetDvdrBlocks size = 2201600
0m 05.40s: DVD: after DVDInfo_SetDvdrBlocks
0m 05.44s: DVD: after SetBurnEngine, Burn Type = 0
0m 05.44s: DVD: after init write settings.
0m 05.44s: DVD: finish init write settings.
0m 05.44s: BD: init read settings.
0m 05.44s: BD: init write settings.
0m 05.45s: bd set region A
0m 05.45s: Burn engine: config engine type-0 begin.
0m 05.45s: Burn engine: config engine type-0 end.
0m 05.45s: Burn engine: writer count 1.
0m 05.45s: Burn engine: 0- E:\ [hp BD MLT UJ262 1.00 (Scsi)].
0m 05.45s: Burn engine: end init.
0m 05.84s: Init process: Init setting page successful.
0m 05.85s: QtLog Mode = false
0m 05.85s: Show UI Step 2
0m 06.10s: Show UI Step 3
0m 06.10s: Start show MainUI.
0m 06.10s: UI manager: switch to Converter mode.
0m 07.01s: allow_test : false
0m 07.05s: Init process: init main ui successful.
0m 07.35s: Init process: show main ui successful.
0m 07.35s: DriveX msg: Init driveX E with I/O mode: 0
0m 09.74s: opening drive E
0m 09.74s: opened i/o
0m 09.74s: Source managerpen source flag:1,1,1,1,1
0m 09.75s: Source managerpen source flag:1,1,1,1,1
0m 22.23s: opening drive E
0m 22.23s: opened i/o
0m 22.23s: got media type 15
0m 24.34s: got max lba 21420863
0m 26.62s: got disc type 20
0m 26.62s: type Blu-ray BDMV
0m 26.62s: volume label WILD
0m 26.62s: DriveX msg: add media in driveX E.
0m 26.62s: DriveX msg: send open media msg to thread for driveX E.
0m 26.62s: Source managerpen source flag:1,1,1,1,1
0m 26.62s: Source manager: add source id 0.
0m 26.63s: bd set region ?
0m 26.63s: Source open statusVD Yes, 2231-10-11
0m 26.63s: Source open status:BD Yes, 2231-10-11
0m 26.63s: bd set region A
0m 26.63s: opening drive E
0m 27.54s: opened i/o
0m 28.45s: got max lba 21420863
0m 29.38s: got disc type 20
0m 29.38s: internal path E:/BDMV/
0m 30.47s: aacs 1 bd+ 1
0m 30.66s: got bdmv
0m 31.87s: movie name: wild
0m 31.87s: got agid 3
0m 31.94s: sent host cert chal
0m 31.94s: got drive cert chal
0m 31.94s: BEC 1
0m 31.95s: DRIVE_VENDOR 0x0001
0m 32.02s: got drive key
0m 32.02s: got host key signature
0m 32.02s: verified drive signature
0m 32.02s: verified host signature
0m 32.13s: sent host signature and key point
0m 32.13s: got bus key
0m 32.13s: got volume id
0m 32.13s: got volume id mac
0m 32.13s: volume id is correct
0m 32.13s: got vid
0m 32.35s: blu-ray A23DD3D9BC797E6D084503A8BEF67B719C07AB02
0m 32.91s: cert BEE=0x80 same
0m 34.37s: D 446FA16D
1m 01.12s: main playlist 00801.mpls
1m 01.12s: selected region A
1m 01.13s: bd set region A
1m 29.42s: got vuk
1m 29.42s: got fut
1m 29.56s: got agid 3
1m 29.63s: sent host cert chal
1m 29.63s: got drive cert chal
1m 29.63s: BEC 1
1m 29.63s: DRIVE_VENDOR 0x0001
1m 29.63s: AACS bus encryption is enabled
1m 29.70s: got drive key
1m 29.71s: got host key signature
1m 29.71s: verified drive signature
1m 29.71s: verified host signature
1m 29.82s: sent host signature and key point
1m 29.82s: got bus key
1m 29.82s: got data key
1m 30.00s: got unit key 1
1m 53.22s: got bdmv
1m 55.92s: stream(27,3,6)/clip(27,3,4) infos are not the same, using clip info to regulate it.
2m 10.43s: got extended bdinfo
2m 10.43s: opened blu-ray
2m 10.97s: Source manager: open successful.
2m 11.64s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 801 ).
2m 32.61s: read error: 11 1424448 10906367 8612382 800
2m 46.06s: read error: 11 1424448 10906367 8612382 800
3m 01.43s: read error: 11 1424448 10906367 8612412 800
3m 11.81s: read error: 11 1424448 10906367 8612316 800
3m 17.31s: info: bluray read data end
3m 18.48s: ========WorkAttr::SetSource=======
3m 18.48s: Source Video Size Original : 1920 x 804
3m 18.48s: Source Video Size Display : 1920 x 804
3m 18.48s: Source Video FPS : 24000 / 1001
3m 18.48s: Source Video Bitrate : 1200
3m 18.48s: Source Audio Bitrate : 0
3m 18.49s: Source Audio Channels : 6
3m 18.49s: Source Audio Volume : 100
3m 18.49s: Work Profile : iPad Air.Default
4m 00.47s: UILog:OnMsgToolbar_Start
4m 00.47s: UILog:Msg Start : ready start
4m 00.47s: UILog:Msg Start : start test run work
4m 00.47s: UILog:right button to null, work falg = -1
4m 00.55s: UILog:Msg Start : run work
4m 00.55s: UILog:Run current Work.
4m 00.55s: UILog:Begin work Converter.
4m 00.55s: UILog:Begin work copy or converter.
4m 00.55s: Start check Blu-ray Ripper (3D Plus) register status.
4m 00.55s: End check Blu-ray Ripper (3D Plus) register status: Enable
4m 00.55s: UILog:start running at thread.
4m 00.55s: UILog:return flag at start running at thread ok.
4m 00.56s: OPList at BD Converter : (4113.2),(4352.2),(4608.8)
4m 00.56s: Blu-ray Converter (3D Plus) check watermark flag: 0
4m 03.80s: ------------------ convert work begin(1/1) ------------------
4m 03.80s: start process(1/1)
4m 03.80s: info: create config(bluray2video)
4m 03.80s: info: crop value after clone: left = 0 right= 0 top=138 bottom=138 enable=1 mode=1
4m 03.80s: info: use profile(iPad Air.Default)
4m 03.80s: info: bluray playlist(801),angle(0),chapter(1->37),BDAV(no)
4m 03.80s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
4m 03.81s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(6936)sec opcode(compress)]
4m 03.81s: info: perset file config OK !
4m 03.81s: info: set output video frame_rate(24000/1001)
4m 03.81s: info: stream output Video(4113)[codec(h264) size(1920*804) fps(24000/1001) interlace(0) bitrate(5552) duration(6936)sec]
4m 03.82s: info: stream input@ Audio(4352)[codec(dca) channels(6) sample(48000) bitrate(0) bitdepth(24) opcode(compress)]
4m 03.82s: info: stream output Audio(4352)[codec(aac) channels(2) sample(48000) bitrate(128000) bitdepth(16) opcode(compress)]
4m 03.82s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(render)]
4m 03.82s: info: SubMode(Render) -- Display Only forced Subtitle(true)
4m 03.83s: UILog:MsgWork:WorkStatus_Start
4m 03.84s: CUDA GPU acceleration for video decoding enabled
4m 04.04s: CUDA GPU acceleration for video encoding enabled
4m 04.04s: info: h264_encode: encode param profile(1) level(41) bitrate(5552) crf(-1) interlace(0)
4m 04.35s: info: connect to sub render filter success.
4m 04.72s: info: processing source(00800.m2ts)
25m 10.46s: read error: 11 1424448 10906367 5836671 800
26m 25.94s: read error: 11 1424448 10906367 5837406 800
27m 25.93s: info: bluray read data end
27m 25.93s: info: audio_decode finish job
27m 25.94s: audio_encode finish job
27m 27.57s: ------------------ convert work finished ------------------
27m 28.61s: UILog:MsgWork:current work finish : 3
27m 29.20s: UILog:Run Work to end.
27m 30.27s: DriveX msg: remove media in driveX E.
27m 30.28s: Source managerpen source flag:1,0,1,1,1
139m 13.99s: opening drive E
139m 13.99s: opened i/o
139m 13.99s: DriveX msg: media open(false) failed in driveX E.
139m 16.00s: DriveX msg: remove media in driveX E.
139m 16.00s: Source managerpen source flag:1,0,1,1,1
500m 09.95s: Warning : Null Data at Work
500m 11.03s: Source managerpen source flag:1,1,1,1,1
500m 13.30s: Exit process: stop running.
500m 13.30s: Exit process: preview pfn_releaseplayer end
500m 13.37s: Exit process: preview pfn_deinit end
500m 13.46s: Exit process: preview FreeLibrary end
500m 13.46s: Exit process: finish MainUI.
500m 13.51s: Exit process: finish FreePref.
500m 13.51s: Exit process: finish AVEditWrap Release.

[signals]

The log indicates read errors, but I do not remember getting them with this title when it was first released. I will try to find my copy and check it again. Meanwhile, try cleaning your disc gently and also the laser lenses on your drive.