BD Ripper (3D Plus) Hanging at 50% complete

[broderp]

I recently bought 3 titles: SAN ANDREAS 3D, TERMINATOR GENISYS and MARVEL ANT-MAN.

I rip my movies to a profile I made for my ASUS TF300 tablet. I have used it for a few years now.

MARVELS ANT-MAN ripped perfectly from the Blu-Ray to the MP4 profile I created. However both SAN ANDREAS 3D and TERMINATOR GENISYS both hang at 50%.

I tried to roll back to 9.2.3.9, with the same results. I am able to copy the Blu-Rays to an ISO file with no issues. I haven't burned these yet as I don't have any blank discs, but they playback just fine on my PC. I tried using the ISO file to rip to the tablet profile with the same results, it hangs at 50%.

Any ideas? I'll try and clear my log and post a fresh one it as I know this will help. Which log does the forum need to help diagnose this?

Thank you.

[october262]

Try disable your gpu codecs and switch everything
To software and disable lighting shrink encoding.
Retry your movies again.

[broderp]

Cleared all logs, restarted DVDFAb and let this run over night. Woke up to this stuck at 50%. Id did create a small 40MB file which does play perfectly, but is only a few minutes long.

I'll try the other suggestions when I get home from work.


Here is the log file:

0m 00.01s:

DVDFab 9.2.4.2 (2016/05/16 00:33:58)

0m 00.01s: Init Public log : enabled.
0m 00.01s: Init Private log : finish.
0m 00.01s: App info: 2016-5-12
0m 00.01s: App info: 9.2.4.2 9242 Official
0m 00.01s: Init CrashReportSettings : enabled.
0m 00.01s: Init DVDInfo_Log : enabled.
0m 00.01s: Init Qt_Log : disabled.
0m 00.03s: autostyle : use qss file :/Resources/style.css
0m 00.07s: Profile Manager :: Begin Load Profile
0m 00.07s: Qt Translator file load success
0m 00.07s: App info: client type 2.
0m 00.09s: MobilePlay load: preload successful.
0m 00.14s: MobilePlay load: Load successful.
0m 00.14s: set code page : .0
0m 00.14s: Init process: Transfer settings successful.
0m 00.14s: info: check logpath= C:/Users/R******/Documents/DVDFab9/Log/
0m 00.64s: Profile Manager :: End Load Profile
0m 00.89s: info: _check_gpu is running ...
0m 01.11s: info: check_gpu run successful
0m 01.11s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 01.11s: GPU check: GPUAccelerate-0XD303D
0m 01.13s: GPU check: GPUAccelerate setting-0XD0000, 0XD0000
0m 01.13s: GPU check: CUDA cap-0X1
0m 01.13s: GPU check: Support coreavc decode-0
0m 01.13s: GPU check: Lighting shrink status-1, 1
0m 01.13s: GPU check: Graphics info 1: Intel(R) HD Graphics 4000 : 10.18.10.4276 : 11,3
0m 01.13s: GPU check: Graphics info 2: NVIDIA GeForce GT 640M : 10.18.13.6191 : 3.0
0m 01.13s: Init process: Load config successful.
0m 01.13s: Init process: Windows os type is 64bit System Windows 8.
0m 01.13s: Init process: command line in is
0m 01.17s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( 55:8260762964 )( OV:9242 )( BV:9243 )( S:6c2985dfdb6a8057c0918061ab71e0d7 )
0m 01.17s: Reg check: Option check status-Local
0m 01.17s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( DVD to Blu-ray:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-( CinaviaRemoval HD:0:0 )-
0m 01.17s: App info: language type ENU.
0m 01.17s: App info: Install path C:/Program Files (x86)/DVDFab 9/
0m 01.17s: Export Blu-ray source information report : enabled
0m 01.17s: Init process: Init GPU settings successful.
0m 01.17s: connect plugin info : start.
0m 01.31s: Reg check: Times of cinavia connecting error is: 0
0m 01.31s: Reg check: Start get sys number.
0m 01.31s: Reg check: Serial number is: 08-60-6e-12-71-fa
0m 01.31s: Reg check: Connect type is: 0
0m 01.53s: Init preview: Begin init preview play engine.
0m 01.53s: Init preview: Begin init preview play engine(Internal).
0m 01.80s: Init preview: Init internal engine successful.
0m 01.81s: connect plugin info : 1:1
0m 02.11s: Reg check: Times of connecting error is: 0
0m 02.11s: Reg check: Parse string: ( S:083a566749eb87116a1bbd9adb635b0e
0m 02.12s: Reg check: Option check status-NewWork
0m 02.12s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( DVD to Blu-ray:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-( CinaviaRemoval HD:1:0 )-
0m 02.24s: Burn engine: start init.
0m 02.24s: Burn engine: set log folder.
0m 02.24s: DVD: init read settings.
0m 02.24s: DVD: init write settings.
0m 02.27s: BD: init read settings.
0m 02.27s: BD: init write settings.
0m 02.27s: bd set region A
0m 02.27s: Burn engine: config engine type-0 begin.
0m 02.27s: Burn engine: config engine type-0 end.
0m 02.27s: Burn engine: writer count 1.
0m 02.27s: Burn engine: 0- E:\ [MATSHITA BD-MLT UJ260AF 1.00 (Scsi)].
0m 02.27s: Burn engine: end init.
0m 02.76s: Init process: Init setting page successful.
0m 02.77s: QtLog Mode = false
0m 02.77s: Show ProductsInfo Dlg 2
0m 09.86s: Start show MainUI.
0m 09.86s: UI manager: switch to Converter mode.
0m 11.08s: Init process: init main ui successful.
0m 11.39s: Init process: show main ui successful.
0m 11.39s: DriveX msg: Init driveX E with I/O mode: 0
0m 11.39s: opening drive E
0m 11.39s: opened i/o
0m 11.39s: got media type 15
0m 15.68s: got max lba 20557119
0m 18.19s: got disc type 20
0m 18.19s: type Blu-ray BDMV
0m 18.19s: volume label Terminator_Genisys
0m 18.19s: DriveX msg: add media in driveX E.
0m 18.19s: DriveX msg: send open media msg to thread for driveX E.
0m 18.19s: opening drive E
0m 18.19s: opened i/o
0m 18.19s: got media type 15
0m 18.59s: got max lba 20557119
0m 20.22s: got disc type 20
0m 20.22s: type Blu-ray BDMV
0m 20.22s: volume label Terminator_Genisys
0m 20.22s: Source managerpen source flag:1,1,1,1,1
0m 20.22s: Source managerpen source flag:1,1,1,1,1
0m 20.24s: Source manager: add source id 0.
0m 20.25s: bd set region ?
0m 20.25s: Source open statusVD Yes, 2231-10-11
0m 20.25s: Source open status:BD Yes, 2231-10-11
0m 20.25s: bd set region ?
0m 20.25s: internal path E:/BDMV/
0m 21.24s: aacs 1 bd+ 0
0m 21.48s: got bdmv
0m 22.44s: got agid 3
0m 22.51s: sent host cert chal
0m 22.51s: got drive cert chal
0m 22.51s: BEC 1
0m 22.51s: DRIVE_VENDOR 0x0001
0m 22.58s: got drive key
0m 22.58s: got host key signature
0m 22.59s: verified drive signature
0m 22.59s: verified host signature
0m 22.69s: sent host signature and key point
0m 22.69s: got bus key
0m 22.69s: got volume id
0m 22.69s: got volume id mac
0m 22.69s: volume id is correct
0m 22.69s: got vid
0m 22.82s: blu-ray 2D210BB15A758F0EB77D843205EFC2EC7CA8162D
0m 23.30s: cert BEE=0x80 same
0m 23.57s: D 8746DA04
0m 23.57s: main playlist 00800.mpls
0m 23.57s: selected region A
0m 23.57s: bd set region A
0m 23.57s: got vuk
0m 23.58s: got agid 3
0m 23.65s: sent host cert chal
0m 23.65s: got drive cert chal
0m 23.65s: BEC 1
0m 23.65s: DRIVE_VENDOR 0x0001
0m 23.65s: AACS bus encryption is enabled
0m 23.72s: got drive key
0m 23.72s: got host key signature
0m 23.72s: verified drive signature
0m 23.72s: verified host signature
0m 23.83s: sent host signature and key point
0m 23.83s: got bus key
0m 23.83s: got data key
0m 24.05s: got unit key 7
0m 24.57s: StealthyClone with BluPath
0m 25.86s: got bdmv
0m 33.68s: got extended bdinfo
0m 33.68s: opened blu-ray
0m 34.06s: Cinavia : no cinavia repair data.
0m 34.10s: Source manager: open successful.
0m 34.32s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 800 ).
0m 40.07s: ========WorkAttr::SetSource=======
0m 40.07s: Source Video Size Original : 1920 x 804
0m 40.07s: Source Video Size Display : 1920 x 804
0m 40.07s: Source Video FPS : 24000 / 1001
0m 40.07s: Source Video Bitrate : 1200
0m 40.07s: Source Audio Bitrate : 0
0m 40.07s: Source Audio Channels : 8
0m 40.07s: Source Audio Volume : 100
0m 40.07s: Work Profile : ASUS TF300 Tablet
0m 40.24s: Source managerpen source flag:1,1,1,1,1
1m 41.15s: UILog:OnMsgToolbar_Start
1m 41.15s: UILog:Msg Start : ready start
1m 41.15s: UILog:Msg Start : start test run work
1m 41.15s: UILog:right button to null, work falg = -1
1m 41.19s: UILog:Msg Start : run work
1m 41.19s: UILog:Run current Work.
1m 41.19s: UILog:Begin work Converter.
1m 41.20s: UILog:Begin work copy or converter.
1m 41.20s: Start check Blu-ray Ripper register status.
1m 41.20s: End check Blu-ray Ripper register status: Enable
1m 41.20s: UILog:start running at thread.
1m 41.20s: UILog:return flag at start running at thread ok.
1m 41.21s: OPList at BD Converter : (4113.2),(4352.2),(4608.32),(4609.32)
1m 41.21s: Blu-ray Converter (3D Plus) check watermark flag: 0
1m 44.93s: ------------------ convert work begin(1/1) ------------------
1m 44.93s: start process(1/1)
1m 44.94s: info: create config(bluray2video)
1m 44.94s: info: crop value after clone: left = 0 right= 0 top=138 bottom=138 enable=1 mode=1
1m 44.94s: info: use profile(ASUS TF300 Tablet)
1m 44.95s: info: bluray playlist(800),angle(0),chapter(1->19),BDAV(no)
1m 44.95s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
1m 44.95s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(7542)sec opcode(compress)]
1m 44.96s: info: perset file config OK !
1m 44.96s: info: set output video frame_rate(24000/1001)
1m 44.96s: info: vdecode hevc= 0, h264= 5, vc1= 0, mpeg2= 5, vencode h264= 8, hevc= 0
1m 44.96s: info: stream output Video(4113)[codec(h264) size(1276*536) fps(24000/1001) interlace(0) bitrate(1460) duration(7542)sec]
1m 44.96s: info: stream input@ Audio(4352)[codec(truehd) channels(8) sample(48000) bitrate(640000) bitdepth(24) opcode(compress)]
1m 44.97s: info: stream output Audio(4352)[codec(ac3) channels(2) sample(44100) bitrate(128000) bitdepth(16) opcode(compress)]
1m 44.98s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(remux)]
1m 44.98s: info: stream output SubPicture(4608)[codec(dvdsub) language(English)]
1m 44.98s: info: stream input@ SubPicture(4609)[codec(pgssub) language(English) opcode(remux)]
1m 44.98s: info: stream output SubPicture(4609)[codec(dvdsub) language(English)]
1m 44.98s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
1m 44.98s: UILog:MsgWork:WorkStatus_Start
1m 44.98s: Intel GPU acceleration for video decoding enabled
1m 45.01s: info: ex process path= C:/Program Files (x86)/DVDFab 9/fabcore.exe
1m 45.46s: info: h264_encode: encode param profile(2) level(41) bitrate(1460) crf(-1) interlace(0)
1m 45.47s: info: processing source(00800.m2ts)
60m 29.93s: info: bluray read data end
60m 31.03s: Intel GPU acceleration for video decoding enabled
60m 31.06s: info: h264_encode: encode param profile(2) level(41) bitrate(1460) crf(-1) interlace(0)
60m 35.75s: info: processing source(00800.m2ts)
331m 17.46s: UILog:OnMsgToolbar_Stop
331m 20.09s: info: filter:filter_video_decode
331m 20.09s: info: fifo:c2c-filter_vtransform-0-1,block:20
331m 20.09s: info: filter:filter_h264_ex
331m 20.09s: info: fifo:c2c-native_mux-0-1,block:203
331m 20.09s: info: filter:filter_adecode
331m 20.09s: info: fifo:c2c-filter_aencode-1-2,block:0
331m 20.10s: info: filter:filter_aencode
331m 20.10s: info: fifo:c2c-native_mux-1-2,block:0
331m 20.10s: info: filter:native_mux
331m 20.10s: info: filter:filter_vtransform
331m 20.10s: info: fifo:c2c-filter_h264_ex-0-1,block:20
331m 20.10s: info: filter:filter_inner_subfilter
331m 20.10s: info: fifo:c2c-native_mux-2-5,block:0
331m 20.10s: info: filter:bd_demux
331m 20.10s: info: fifo:c2c-filter_video_decode-0-1,block:68
331m 20.10s: info: fifo:c2c-filter_adecode-1-2,block:0
331m 20.10s: info: fifo:c2c-filter_inner_subfilter-2-5,block:0
331m 21.68s: ------------------ all convert work cancelled -------------------
331m 22.72s: UILog:MsgWork:current work finish : 4
331m 30.85s: Source managerpen source flag:1,1,1,1,1

[broderp]

Try disable your gpu codecs and switch everything
To software and disable lighting shrink encoding.
Retry your movies again.

This did not work. Same issue.

[3dman]

Until staff can look at your log file try using version 8 of fab.

[Wilson.Wang]

Hi,

Please set 1 pass in Advanced Settings and try again. Thanks

Wilson

[broderp]

Hi,

Please set 1 pass in Advanced Settings and try again. Thanks

Wilson

This did even worse. Got to 1 second and locked up.

Here are my settings: (ASUS TF300 profile)
VIDEO
CODEC: H264
RESOLUTION: 1276x536 (default)
ENCODING METHOD: Fast encoding (1-pass)
VIDEO QUAILITY: High Quaility
FRAME RATE: Same as source
SPLIT: No split

AUDIO
CODEC: AC3
CHANNELS: Dolby ProLogic II
SAMPLE RATE: 44100Hz
BIT RATE: 128 kbps

SUBTITILE
MODE: Remux into file


As a reference I re-ripped AMT-MAN again with my old settings and it worked flawlessly.

Here is my log for this attempt with the above settings:

DVDFab 9.2.4.2 (2016/05/21 09:36:39)

0m 00.06s: Init Public log : enabled.
0m 00.06s: Init Private log : finish.
0m 00.06s: App info: 2016-5-12
0m 00.06s: App info: 9.2.4.2 9242 Official
0m 00.06s: Init CrashReportSettings : enabled.
0m 00.06s: Init DVDInfo_Log : enabled.
0m 00.06s: Init Qt_Log : disabled.
0m 00.21s: autostyle : use qss file :/Resources/style.css
0m 00.68s: Profile Manager :: Begin Load Profile
0m 00.89s: Qt Translator file load success
0m 00.89s: App info: client type 2.
0m 00.90s: MobilePlay load: preload successful.
0m 00.96s: MobilePlay load: Load successful.
0m 00.96s: set code page : .0
0m 00.96s: Init process: Transfer settings successful.
0m 00.96s: info: check logpath= C:/Users/xxxxxxx/Documents/DVDFab9/Log/
0m 03.32s: info: _check_gpu is running ...
0m 03.64s: info: check_gpu run successful
0m 03.64s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 03.64s: GPU check: GPUAccelerate-0XD303D
0m 03.64s: GPU check: GPUAccelerate setting-0XD0000, 0XD0000
0m 03.64s: GPU check: CUDA cap-0X1
0m 03.64s: GPU check: Support coreavc decode-0
0m 03.64s: GPU check: Lighting shrink status-1, 1
0m 03.64s: GPU check: Graphics info 1: Intel(R) HD Graphics 4000 : 10.18.10.4276 : 11,3
0m 03.64s: GPU check: Graphics info 2: NVIDIA GeForce GT 640M : 10.18.13.6191 : 3.0
0m 03.64s: Init process: Load config successful.
0m 03.64s: Init process: Windows os type is 64bit System Windows 8.
0m 03.64s: Init process: command line in is
0m 03.69s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( 55:8260762964 )( OV:9242 )( BV:9243 )( S:1829c1241454dbf212ab5fb89500a7ec )
0m 03.69s: Reg check: Option check status-Local
0m 03.69s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( DVD to Blu-ray:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-( CinaviaRemoval HD:0:0 )-
0m 03.69s: App info: language type ENU.
0m 03.69s: App info: Install path C:/Program Files (x86)/DVDFab 9/
0m 03.69s: Export Blu-ray source information report : enabled
0m 03.69s: Init process: Init GPU settings successful.
0m 03.69s: connect plugin info : start.
0m 03.72s: Profile Manager :: End Load Profile
0m 03.89s: Reg check: Times of cinavia connecting error is: 0
0m 03.89s: Reg check: Start get sys number.
0m 03.89s: Reg check: Serial number is: 08-60-6e-12-71-fa
0m 03.89s: Reg check: Connect type is: 0
0m 04.06s: Init preview: Begin init preview play engine.
0m 04.06s: Init preview: Begin init preview play engine(Internal).
0m 04.34s: connect plugin info : 1:1
0m 04.41s: Init preview: Init internal engine successful.
0m 04.75s: Reg check: Times of connecting error is: 0
0m 04.75s: Reg check: Parse string: ( S:c0e526c9583da693879bb9af977ddd52
0m 04.75s: Reg check: Option check status-NewWork
0m 04.75s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( DVD to Blu-ray:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-( CinaviaRemoval HD:1:0 )-
0m 04.86s: Burn engine: start init.
0m 04.86s: Burn engine: set log folder.
0m 04.86s: DVD: init read settings.
0m 04.86s: DVD: init write settings.
0m 04.89s: BD: init read settings.
0m 04.89s: BD: init write settings.
0m 04.89s: bd set region A
0m 04.89s: Burn engine: config engine type-0 begin.
0m 04.89s: Burn engine: config engine type-0 end.
0m 04.89s: Burn engine: writer count 1.
0m 04.89s: Burn engine: 0- E:\ [MATSHITA BD-MLT UJ260AF 1.00 (Scsi)].
0m 04.89s: Burn engine: end init.
0m 05.38s: Init process: Init setting page successful.
0m 05.39s: QtLog Mode = false
0m 05.64s: Start show MainUI.
0m 05.64s: UI manager: switch to Converter mode.
0m 07.13s: Init process: init main ui successful.
0m 07.44s: Init process: show main ui successful.
0m 07.44s: DriveX msg: Init driveX E with I/O mode: 0
0m 07.45s: opening drive E
0m 07.45s: opened i/o
0m 07.45s: got media type 15
0m 08.82s: got max lba 20557119
0m 11.26s: got disc type 20
0m 11.26s: type Blu-ray BDMV
0m 11.26s: volume label Terminator_Genisys
0m 11.27s: DriveX msg: add media in driveX E.
0m 11.27s: DriveX msg: send open media msg to thread for driveX E.
0m 11.27s: Source managerpen source flag:1,1,1,1,1
0m 11.27s: Source managerpen source flag:1,1,1,1,1
0m 11.28s: Source manager: add source id 0.
0m 11.29s: bd set region ?
0m 11.29s: Source open statusVD Yes, 2231-10-11
0m 11.29s: Source open status:BD Yes, 2231-10-11
0m 11.29s: bd set region ?
0m 11.29s: internal path E:/BDMV/
0m 12.24s: aacs 1 bd+ 0
0m 12.48s: got bdmv
0m 13.39s: got agid 3
0m 13.46s: sent host cert chal
0m 13.46s: got drive cert chal
0m 13.46s: BEC 1
0m 13.46s: DRIVE_VENDOR 0x0001
0m 13.54s: got drive key
0m 13.54s: got host key signature
0m 13.54s: verified drive signature
0m 13.54s: verified host signature
0m 13.65s: sent host signature and key point
0m 13.65s: got bus key
0m 13.65s: got volume id
0m 13.65s: got volume id mac
0m 13.65s: volume id is correct
0m 13.65s: got vid
0m 13.79s: blu-ray 2D210BB15A758F0EB77D843205EFC2EC7CA8162D
0m 14.27s: cert BEE=0x80 same
0m 14.54s: D 8746DA04
0m 14.54s: main playlist 00800.mpls
0m 14.54s: selected region A
0m 14.54s: bd set region A
0m 14.54s: got vuk
0m 14.54s: got agid 3
0m 14.62s: sent host cert chal
0m 14.62s: got drive cert chal
0m 14.62s: BEC 1
0m 14.62s: DRIVE_VENDOR 0x0001
0m 14.62s: AACS bus encryption is enabled
0m 14.69s: got drive key
0m 14.69s: got host key signature
0m 14.69s: verified drive signature
0m 14.69s: verified host signature
0m 14.80s: sent host signature and key point
0m 14.80s: got bus key
0m 14.80s: got data key
0m 15.01s: got unit key 7
0m 15.52s: StealthyClone with BluPath
0m 16.59s: got bdmv
0m 24.41s: got extended bdinfo
0m 24.41s: opened blu-ray
0m 24.78s: Cinavia : no cinavia repair data.
0m 25.30s: Meta : the ownership is E_Meta_Is_Not_Owner.
0m 25.30s: Source manager: open successful.
0m 25.32s: Meta : Load meta info data from local file.
0m 25.59s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 800 ).
0m 31.39s: ========WorkAttr::SetSource=======
0m 31.39s: Source Video Size Original : 1920 x 804
0m 31.39s: Source Video Size Display : 1920 x 804
0m 31.39s: Source Video FPS : 24000 / 1001
0m 31.39s: Source Video Bitrate : 1200
0m 31.39s: Source Audio Bitrate : 0
0m 31.39s: Source Audio Channels : 8
0m 31.39s: Source Audio Volume : 100
0m 31.39s: Work Profile : ASUS TF300 Tablet
0m 31.59s: Source managerpen source flag:1,1,1,1,1
8m 10.21s: UILog:OnMsgToolbar_Start
8m 10.21s: UILog:Msg Start : ready start
8m 10.21s: UILog:Msg Start : start test run work
8m 10.21s: UILog:right button to null, work falg = -1
8m 10.26s: UILog:Msg Start : run work
8m 10.26s: UILog:Run current Work.
8m 10.26s: UILog:Begin work Converter.
8m 10.26s: UILog:Begin work copy or converter.
8m 10.26s: Start check Blu-ray Ripper register status.
8m 10.26s: End check Blu-ray Ripper register status: Enable
8m 10.26s: UILog:start running at thread.
8m 10.26s: UILog:return flag at start running at thread ok.
8m 10.27s: OPList at BD Converter : (4113.2),(4352.2),(4608.32),(4609.32)
8m 10.27s: Blu-ray Converter (3D Plus) check watermark flag: 0
8m 13.89s: ------------------ convert work begin(1/1) ------------------
8m 13.89s: start process(1/1)
8m 13.90s: info: create config(bluray2video)
8m 13.90s: info: crop value after clone: left = 0 right= 0 top=138 bottom=138 enable=1 mode=1
8m 13.91s: info: use profile(ASUS TF300 Tablet)
8m 13.91s: info: bluray playlist(800),angle(0),chapter(1->18),BDAV(no)
8m 13.91s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
8m 13.91s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(7542)sec opcode(compress)]
8m 13.91s: info: perset file config OK !
8m 13.91s: info: set output video frame_rate(24000/1001)
8m 13.91s: info: vdecode hevc= 0, h264= 0, vc1= 0, mpeg2= 0, vencode h264= 0, hevc= 0
8m 13.91s: info: stream output Video(4113)[codec(h264) size(1276*536) fps(24000/1001) interlace(0) bitrate(2460) duration(7542)sec]
8m 13.92s: info: stream input@ Audio(4352)[codec(truehd) channels(8) sample(48000) bitrate(640000) bitdepth(24) opcode(compress)]
8m 13.92s: info: stream output Audio(4352)[codec(ac3) channels(2) sample(44100) bitrate(128000) bitdepth(16) opcode(compress)]
8m 13.92s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(remux)]
8m 13.92s: info: stream output SubPicture(4608)[codec(dvdsub) language(English)]
8m 13.92s: info: stream input@ SubPicture(4609)[codec(pgssub) language(English) opcode(remux)]
8m 13.92s: info: stream output SubPicture(4609)[codec(dvdsub) language(English)]
8m 13.92s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
8m 13.93s: UILog:MsgWork:WorkStatus_Start
8m 13.93s: info: enable multi-thread software decoder, thread count = 8
8m 13.94s: info: ex process path= C:/Program Files (x86)/DVDFab 9/fabcore.exe
8m 14.48s: info: h264_encode: encode param profile(2) level(41) bitrate(2460) crf(-1) interlace(0)
8m 14.54s: info: processing source(00800.m2ts)
129m 14.33s: UILog:OnMsgToolbar_Stop
129m 16.39s: info: filter:filter_video_decode
129m 16.39s: info: fifo:20-filter_vtransform-0-1,block:20
129m 16.39s: info: filter:filter_h264_ex
129m 16.39s: info: fifo:20-native_mux-0-1,block:193
129m 16.39s: info: filter:filter_adecode
129m 16.39s: info: fifo:20-filter_aencode-1-2,block:0
129m 16.39s: info: filter:filter_aencode
129m 16.39s: info: fifo:20-native_mux-1-2,block:0
129m 16.39s: info: filter:native_mux
129m 16.39s: info: filter:filter_vtransform
129m 16.39s: info: fifo:20-filter_h264_ex-0-1,block:20
129m 16.39s: info: filter:filter_inner_subfilter
129m 16.39s: info: fifo:20-native_mux-2-5,block:0
129m 16.39s: info: filter:bd_demux
129m 16.39s: info: fifo:20-filter_video_decode-0-1,block:62
129m 16.39s: info: fifo:20-filter_adecode-1-2,block:0
129m 16.39s: info: fifo:20-filter_inner_subfilter-2-5,block:0
129m 17.98s: ------------------ all convert work cancelled -------------------
129m 19.01s: UILog:MsgWork:current work finish : 4
129m 25.82s: Source managerpen source flag:1,1,1,1,1

[signals]

Please attach your logs in the future instead of posting them in the text area, thanks.

[efigalaxie]

When DVD FAB acts up.

My experience has been that when DVD FAB acts up and starts hanging, crashing, or such - the best option is to uninstall it. REBOOT the machine......this is important. Then reinstall.

There has been the extremely rare occasion where I had to try a different product. I don't like the user interface of that product (I am sure we all know what that product is.) That product has issues from time to time as well. (It will produce extremely messed up rips on the movies that DVD Fab won't read.....those dvds with bad scratches etc. I would rather the rip abort than have me think I have a good copy.)

So try uninstalling/reboot/reinstalling.

Also try deleting and recreating your profile....or try another. That tablet will play straight MP4 files..... So no special profile is really needed.

[broderp]

My experience has been that when DVD FAB acts up and starts hanging, crashing, or such - the best option is to uninstall it. REBOOT the machine......this is important. Then reinstall.

There has been the extremely rare occasion where I had to try a different product. I don't like the user interface of that product (I am sure we all know what that product is.) That product has issues from time to time as well. (It will produce extremely messed up rips on the movies that DVD Fab won't read.....those dvds with bad scratches etc. I would rather the rip abort than have me think I have a good copy.)

So try uninstalling/reboot/reinstalling.

Also try deleting and recreating your profile....or try another. That tablet will play straight MP4 files..... So no special profile is really needed.

Been gone for awhile, but this issue persists. I just tried Batman v Superman Ultimate and it hangs at 50% as well. I so wanted to watch this on my tablet on my next business trip.

I like the profile as the "straight MP4" format does not play well with my ASUS, and subtitles do not work.

I will try to uninstall and reinstall the software.