Ender's game

[YESMAN50]

problem making back up copy stops at 87% with a freeze and wene it burns missing about 25 min of movie any one have the same problem

[october262]

please post dvdfabs internal logs. try the latest beta version - 9.1.2.7 and
make sure that pathplayer is set to always enabled. please check your disc for
scratches/defects, clean if necessary.

[signals]

This is not a "General Question', it is specific about this movie. Please tell us whether it is a DVD or Blu-ray, I will move your thread to the correct forum. Also need to know the Region and Country for the disc.

[gmalcom69]

Enders Game

I was able to rip Ender's Game with DVDFab 8QT, it failed with the latest of DVDFab 9.

The problem is the movie skips. During playback it looks great, but then jumps ahead plays the seen, the jumps back to were it should have been then jumps forward again to the end of the seen, I will see all three parts just jumbled.

It did this exact thing in 2 different parts of the blu-ray. I tried watching the blu-ray on a regular player and the movie plays fine without a hick-up.

For what it is worth, the first hick-up happens when the Colonel comes to the dorm and Ender does pushups. The second hick-up is when he plays the game on his i-pad the first time.

[signals]

Please provide the requested information on the Region and country of your original disc.

[YESMAN50]

region 1 canada

and its blue ray

[signals]

Then it is actually Region A. Thanks for the info, it apparently has slightly different protection than the two US versions.

One of you please post the DVDFab internal log session from Ender's Game, from DVDFab v9.1.2.7 or 9.1.2.8.

[gmalcom69]

Enders Game

As a note my copy is just region A America from amazon.

DVDFab 9.1.2.7 (2014/02/20 12:57:14)

0m 00.01s: Init Public log : enabled.
0m 00.01s: Init Private log : finish.
0m 00.01s: App info: 2014-2-15
0m 00.01s: App info: 9.1.2.7 9127 Beta
0m 00.01s: Init CrashReportSettings : disabled.
0m 00.01s: Init DVDInfo_Log : enabled.
0m 00.09s: Profile Manager :: Begin Load Profile
0m 00.09s: Qt Translator file load success
0m 00.10s: App info: client type 2.
0m 00.12s: Fabplay load: preload successful.
0m 00.17s: Fabplay load: Load successful.
0m 00.17s: Init process: Transfer settings successful.
0m 00.17s: info: fabcheck logpath= C:/Users/Greg/Documents/DVDFab9/Log/
0m 00.20s: fab_check_gpu is running ...
0m 00.35s: fab_check_gpu run successful
0m 00.35s: info: recommand= 8248, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 00.35s: GPU check: GPUAccelerate-12351
0m 00.35s: GPU check: GPUAccelerate setting-8248, 8248
0m 00.35s: GPU check: CUDA cap-1
0m 00.35s: GPU check: Support coreavc decode-0
0m 00.35s: GPU check: Lighting shrink status-1, 1
0m 00.35s: GPU check: Graphics info 1: NVIDIA GeForce GTX 675M : :
0m 00.35s: GPU check: Graphics info 2: NVIDIA GeForce GTX 675M : 6.0 : 2.1
0m 00.37s: Init process: Load config successful.
0m 00.37s: Init process: Windows os type is 13.
0m 00.37s: Init process: command line in is
0m 00.45s: Reg check: Option check status-Failed
0m 00.46s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:0:0 )-( DVD to Mobile:0:0 )-( Blu-ray to Blu-ray:0:0 )-( Blu-ray to Mobile:0:0 )-( File to Mobile:0:0 )-( Blu-ray to DVD:0:0 )-( File to DVD:0:0 )-( File to Blu-ray:0:0 )-( File Mover:1:0 )-( Blu-ray to 3D:0:0 )-( 2D to 3D:0:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 00.46s: App info: language type ENU.
0m 00.46s: Reg check: Start get sys number.
0m 00.46s: Reg check: Serial number is: 68-5d-43-23-61-36:68-5d-43-23-61-36:68-5d-43-23-61-39:68-5d-43-23-61-35:74-86-7a-70-ff-9b
0m 00.46s: Reg check: Connect type is: 1
0m 01.47s: Profile Manager :: End Load Profile
0m 02.03s: Reg check: Times of connecting error is: 0
0m 02.03s: Reg check: Parse string: ( OV:9128 )( BV:9127
0m 02.47s: Reg check: thread exit normal.
0m 02.47s: Reg check: Option check status-NewWork
0m 02.47s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:0 )-( DVD to Mobile:1:0 )-( Blu-ray to Blu-ray:1:0 )-( Blu-ray to Mobile:1:0 )-( File to Mobile:1:0 )-( Blu-ray to DVD:1:0 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:0 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 02.47s: Reg check: connect successful and result code is 1.
0m 02.47s: Reg check: End check info.
0m 02.47s: Init process: Init GPU settings successful.
0m 02.57s: Init preview: Begin init preview play engine.
0m 02.83s: Init preview: Init internal engine successful.
0m 03.21s: Burn engine: start init.
0m 03.35s: Burn engine: engine type-0.
0m 03.36s: Burn engine: writer count 5.
0m 03.36s: Burn engine: 0- D:\ [HL-DT-ST DVDRWBD CA30N A200 (Ide)].
0m 03.36s: Burn engine: 1- E:\ [HL-DT-ST BD-RE BP40NS20 ML01 (Usb)].
0m 03.36s: Burn engine: 2- H:\ [HL-DT-ST BD-RE BE06LU10 YE03 (Usb)].
0m 03.36s: Burn engine: 3- I:\ [HL-DT-ST DVDRAM GSA-4160B A300 (Usb)].
0m 03.36s: Burn engine: 4- J:\ [HL-DT-ST BD-RE BE06LU10 YE03 (Usb)].
0m 03.36s: Burn engine: end init.
0m 04.04s: Init process: Init setting page successful.
0m 28.22s: Reg check: Start get sys number.
0m 28.22s: Reg check: Serial number is: 68-5d-43-23-61-36:68-5d-43-23-61-36:68-5d-43-23-61-39:68-5d-43-23-61-35:74-86-7a-70-ff-9b
0m 28.22s: Reg check: Connect type is: 0
0m 29.68s: Reg check: Times of connecting error is: 0
0m 37.74s: Reg check: Start get sys number.
0m 37.74s: Reg check: Serial number is: 68-5d-43-23-61-36:68-5d-43-23-61-36:68-5d-43-23-61-39:68-5d-43-23-61-35:74-86-7a-70-ff-9b
0m 37.74s: Reg check: Connect type is: 0
0m 39.27s: Reg check: Times of connecting error is: 0
0m 39.27s: Reg check: Parse string: ( 20:8263532095 )( 21:8263532095 )( 22:8263532095 )( 50:8260762964 )( 80:8260762964 )( 2:8260762964 )( 11:8260762964 )( 60:8260762964 )( 70:8260762964 )( 61:8260762964 )( 62:8260762964 )( S:4312ba8b5f229b1890cedc707ef2dc58
0m 39.78s: Reg check: Option check status-NewWork
0m 39.78s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:1 )-( File to Blu-ray:1:1 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 51.92s: UI manager: switch to Copy mode.
0m 52.44s: Init process: init main ui successful.
0m 52.44s: Init process: show main ui successful.
0m 52.45s: DriveX msg: Init driveX D with I/O mode: 0
0m 52.45s: DriveX msg: Init driveX E with I/O mode: 0
0m 52.45s: DriveX msg: Init driveX H with I/O mode: 0
0m 52.45s: DriveX msg: Init driveX I with I/O mode: 0
0m 52.45s: DriveX msg: Init driveX J with I/O mode: 0
0m 52.72s: opening drive D
0m 52.72s: opened i/o
0m 52.72s: got media type 16
0m 57.06s: got max lba 24135583
0m 58.39s: got disc type 20
0m 58.39s: type Blu-ray BDMV
0m 58.39s: volume label ENDERS_GAME
0m 58.40s: DriveX msg: add media in driveX D.
0m 58.40s: DriveX msg: send open media msg to thread for driveX D.
0m 58.40s: opening drive D
0m 58.40s: opened i/o
0m 58.41s: got media type 16
0m 58.79s: got max lba 24135583
1m 00.19s: got disc type 20
1m 00.19s: type Blu-ray BDMV
1m 00.19s: volume label ENDERS_GAME
1m 00.19s: opening drive E
1m 00.19s: opened i/o
1m 00.20s: UI manager: switch to Ripper mode.
1m 00.72s: opening drive H
1m 00.72s: opened i/o
1m 00.77s: opening drive I
1m 00.77s: opened i/o
1m 00.78s: opening drive J
1m 00.78s: opened i/o
1m 03.06s: Source manager: add source id 0.
1m 03.07s: Open blu-ray disc expired time: 22311011
1m 03.07s: opening drive D
1m 03.07s: opened i/o
1m 03.48s: got max lba 24135583
1m 04.86s: got disc type 20
1m 04.86s: internal path D:/BDMV/
1m 05.84s: aacs 0 bd+ 0
1m 06.26s: got bdmv
1m 09.96s: movie name: ender's game||enders_game
1m 13.78s: no enough free sectors for 00002.jar, available 0, sectors required 1
1m 13.83s: no enough free sectors for 00006.jar, available 0, sectors required 2
1m 13.88s: no enough free sectors for 03001.jar, available 0, sectors required 2
1m 14.43s: got bdmv
1m 34.46s: got extended bdinfo
1m 34.46s: opened blu-ray
1m 34.86s: Source manager: open successful.
1m 35.87s: Work manager: create Ripper work 0 with source 0 and uiinfo 0( title 750 ).
1m 40.49s: ========WorkAttr::SetSource=======
1m 40.49s: Source Video Size Original : 1920 x 800
1m 40.50s: Source Video Size Display : 1920 x 800
1m 40.50s: Source Video FPS : 24000 / 1001
1m 40.50s: Source Video Bitrate : 1200
1m 40.50s: Source Audio Bitrate : 0
1m 40.50s: Source Audio Channels : 8
1m 40.50s: Source Audio Volume : 100
1m 40.50s: Work Profile : MP4
1m 53.45s: Work manager: create Ripper work 1 with source 0 and uiinfo 0( title 750 ).
1m 53.46s: ========WorkAttr::SetSource=======
1m 53.46s: Source Video Size Original : 1920 x 800
1m 53.46s: Source Video Size Display : 1920 x 800
1m 53.46s: Source Video FPS : 24000 / 1001
1m 53.46s: Source Video Bitrate : 1200
1m 53.46s: Source Audio Bitrate : 0
1m 53.46s: Source Audio Channels : 8
1m 53.46s: Source Audio Volume : 100
1m 53.46s: Work Profile : AVI
2m 13.03s: Work manager: create Ripper work 2 with source 0 and uiinfo 0( title 750 ).
2m 13.03s: ========WorkAttr::SetSource=======
2m 13.03s: Source Video Size Original : 1920 x 800
2m 13.03s: Source Video Size Display : 1920 x 800
2m 13.03s: Source Video FPS : 24000 / 1001
2m 13.03s: Source Video Bitrate : 1200
2m 13.04s: Source Audio Bitrate : 0
2m 13.04s: Source Audio Channels : 8
2m 13.04s: Source Audio Volume : 100
2m 13.04s: Work Profile : AVI.Default
3m 39.55s: UILog:OnMsgToolbar_Start
3m 39.57s: UILog:Msg Start : ready start
3m 39.57s: UILog:Msg Start : start test run work
3m 39.57s: UILog:right button to null, work falg = -1
3m 39.58s: UILog:Msg Start : run work
3m 39.58s: UILog:Run current Work.
3m 39.58s: UILog:Begin work ripper.
3m 39.58s: UILog:Begin work copy or converter.
3m 39.58s: Start check Blu-ray Ripper (3D Plus) register status.
3m 39.59s: End check Blu-ray Ripper (3D Plus) register status: Enable
3m 39.59s: UILog:start running at thread.
3m 39.59s: UILog:return flag at start running at thread ok.
3m 39.60s: OPList at BD Ripper : (4113.2),(4352.1),(4608.16)
3m 39.61s: Blu-ray ripper (3D Plus) check watermark flag: 0
3m 39.62s: ------------------ convert work begin(1/1) ------------------
3m 39.62s: info: create config(bluray2video)
3m 39.63s: info: use profile(AVI.Default)
3m 39.63s: info: bluray playlist(750),angle(0),chapter(1->17),BDAV(no)
3m 39.63s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
3m 39.64s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
3m 39.64s: info: perset file config OK !
3m 39.64s: info: set output video frame_rate(24000/1001)
3m 39.64s: info: stream output Video(4113)[codec(h264) size(1920*800) fps(24000/1001) interlace(0)]
3m 39.64s: info: stream input@ Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(remove_hd)]
3m 39.64s: info: stream output Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24)]
3m 39.65s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(extract)]
3m 39.65s: info: stream output SubPicture(4608)[codec(xsub) language(English)]
3m 39.65s: info: SubMode(Extract) -- Display Only forced Subtitle(false)
3m 39.66s: UILog:MsgWork:WorkStatus_Start
3m 39.66s: CUDA GPU acceleration for Lightning-Shrink enabled
3m 39.66s: info: h264_encode: encode param profile(1) level(40) bitrate(-1) crf(20)
3m 42.13s: info: processing source(00513.m2ts)
5m 15.12s: info: processing source(00504.m2ts)
5m 29.92s: info: processing source(00501.m2ts)
5m 40.02s: info: processing source(00510.m2ts)
14m 24.54s: info: processing source(00502.m2ts)
14m 55.29s: info: processing source(00505.m2ts)
15m 08.78s: info: processing source(00514.m2ts)
15m 24.96s: info: processing source(00507.m2ts)
16m 46.93s: info: processing source(00511.m2ts)
16m 58.11s: info: processing source(00508.m2ts)
17m 37.69s: info: processing source(00503.m2ts)
17m 46.99s: info: processing source(00506.m2ts)
18m 08.76s: info: processing source(00509.m2ts)
18m 27.29s: info: processing source(00515.m2ts)
18m 37.20s: info: processing source(00512.m2ts)
20m 32.13s: error: filter name(bd_demux), type(1), id(26), get std_exception(bad allocation)
21m 14.03s: error: Work 1 failed, Error = control graph control_filter_error error: filter name(bd_demux), type(1), id(26), get std_exception(bad allocation)


21m 14.03s: ------------------ convert work failed ------------------
21m 15.04s: UILog:MsgWork:current work finish : 2
21m 15.04s: UILog:Run Work to end.

note: if I do it with 8.2.3.0 QT it does rip just mixes up the order twice!

[gmalcom69]

Enders Game

before I'm asked, I also ran it without HD audio, and software only.

Please find attached the error files.

137m 54.84s: DriveX msg: remove media in driveX D.
189m 40.93s: opening drive D
189m 40.93s: opened i/o
189m 40.94s: got media type 16
189m 41.36s: got max lba 24135583
189m 42.68s: got disc type 20
189m 42.68s: type Blu-ray BDMV
189m 42.69s: volume label ENDERS_GAME
189m 42.69s: DriveX msg: add media in driveX D.
189m 42.69s: DriveX msg: send open media msg to thread for driveX D.
189m 42.69s: Source manager: add source id 1.
189m 42.71s: Open blu-ray disc expired time: 22311011
189m 42.71s: internal path D:/BDMV/
189m 43.89s: aacs 0 bd+ 0
189m 44.25s: got bdmv
189m 47.91s: movie name: ender's game||enders_game
189m 53.07s: no enough free sectors for 00002.jar, available 0, sectors required 1
189m 53.11s: no enough free sectors for 00006.jar, available 0, sectors required 2
189m 53.16s: no enough free sectors for 03001.jar, available 0, sectors required 2
189m 53.72s: got bdmv
190m 13.49s: got extended bdinfo
190m 13.49s: opened blu-ray
190m 13.88s: Source manager: open successful.
190m 14.92s: Work manager: create Ripper work 3 with source 1 and uiinfo 1( title 750 ).
190m 19.55s: ========WorkAttr::SetSource=======
190m 19.55s: Source Video Size Original : 1920 x 800
190m 19.56s: Source Video Size Display : 1920 x 800
190m 19.56s: Source Video FPS : 24000 / 1001
190m 19.56s: Source Video Bitrate : 1200
190m 19.56s: Source Audio Bitrate : 0
190m 19.56s: Source Audio Channels : 8
190m 19.56s: Source Audio Volume : 100
190m 19.56s: Work Profile : AVI.Default
190m 52.13s: UILog:OnMsgToolbar_Start
190m 52.14s: UILog:Msg Start : ready start
190m 52.15s: UILog:Msg Start : start test run work
190m 52.15s: UILog:Msg Start : run work
190m 52.16s: UILog:Run current Work.
190m 52.16s: UILog:Begin work ripper.
190m 52.16s: UILog:Begin work copy or converter.
190m 52.16s: Start check Blu-ray Ripper (3D Plus) register status.
190m 52.16s: End check Blu-ray Ripper (3D Plus) register status: Enable
190m 52.16s: UILog:start running at thread.
190m 52.17s: UILog:return flag at start running at thread ok.
190m 52.18s: OPList at BD Ripper : (4113.2),(4352.4),(4608.16)
190m 52.18s: Blu-ray ripper (3D Plus) check watermark flag: 0
190m 52.18s: ------------------ convert work begin(1/1) ------------------
190m 52.18s: info: create config(bluray2video)
190m 52.18s: info: use profile(AVI.Default)
190m 52.18s: info: bluray playlist(750),angle(0),chapter(1->17),BDAV(no)
190m 52.18s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
190m 52.21s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
190m 52.21s: info: perset file config OK !
190m 52.21s: info: set output video frame_rate(24000/1001)
190m 52.21s: info: stream output Video(4113)[codec(h264) size(1920*800) fps(24000/1001) interlace(0)]
190m 52.21s: info: stream input@ Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(remove_hd)]
190m 52.22s: info: stream output Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24)]
190m 52.22s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(extract)]
190m 52.22s: info: stream output SubPicture(4608)[codec(xsub) language(English)]
190m 52.22s: info: SubMode(Extract) -- Display Only forced Subtitle(false)
190m 52.23s: UILog:MsgWork:WorkStatus_Start
190m 52.23s: info: enable multi-thread software decoder, thread count = 8
190m 52.23s: fifo stream decreased from 58fe000 to 42bf000
190m 52.23s: fifo stream decreased from 42bf000 to 2c80000
190m 53.25s: shared fifo stream decreased from 41ec000 to 3171000
190m 53.25s: shared fifo stream decreased from 3171000 to 20f6000
190m 53.25s: shared fifo stream decreased from 20f6000 to 107b000
190m 53.25s: --- connect filter failed(580.00 1 17281024) ---

190m 53.25s: error: Work 1 failed, Error = graph not_suitable_connected_filter graph(0) - pinName:video frame
190m 53.25s: ------------------ convert work failed ------------------
190m 55.27s: UILog:MsgWork:current work finish : 2
190m 55.27s: UILog:Run Work to end.
191m 52.05s: UILog:OnMsgToolbar_Start
191m 52.06s: UILog:Msg Start : ready start
191m 52.06s: UILog:Msg Start : start test run work
191m 52.08s: UILog:Msg Start : run work
191m 52.08s: UILog:Run current Work.
191m 52.08s: UILog:Begin work ripper.
191m 52.08s: UILog:Begin work copy or converter.
191m 52.08s: Start check Blu-ray Ripper (3D Plus) register status.
191m 52.08s: End check Blu-ray Ripper (3D Plus) register status: Enable
191m 52.08s: UILog:start running at thread.
191m 52.09s: UILog:return flag at start running at thread ok.
191m 52.10s: OPList at BD Ripper : (4113.2),(4352.1),(4608.16)
191m 52.10s: Blu-ray ripper (3D Plus) check watermark flag: 0
191m 52.10s: ------------------ convert work begin(1/1) ------------------
191m 52.10s: info: create config(bluray2video)
191m 52.10s: info: use profile(AVI.Default)
191m 52.10s: info: bluray playlist(750),angle(0),chapter(1->17),BDAV(no)
191m 52.10s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
191m 52.12s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
191m 52.13s: info: perset file config OK !
191m 52.13s: info: set output video frame_rate(24000/1001)
191m 52.13s: info: stream output Video(4113)[codec(h264) size(1920*800) fps(24000/1001) interlace(0)]
191m 52.13s: info: stream input@ Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(remove_hd)]
191m 52.13s: info: stream output Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24)]
191m 52.13s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(extract)]
191m 52.13s: info: stream output SubPicture(4608)[codec(xsub) language(English)]
191m 52.13s: info: SubMode(Extract) -- Display Only forced Subtitle(false)
191m 52.14s: UILog:MsgWork:WorkStatus_Start
191m 52.15s: info: enable multi-thread software decoder, thread count = 8
191m 52.15s: fifo stream decreased from 58fe000 to 42bf000
191m 52.15s: fifo stream decreased from 42bf000 to 2c80000
191m 53.16s: shared fifo stream decreased from 41ec000 to 3171000
191m 53.16s: shared fifo stream decreased from 3171000 to 20f6000
191m 53.16s: shared fifo stream decreased from 20f6000 to 107b000
191m 53.16s: --- connect filter failed(580.00 1 17281024) ---

191m 53.17s: error: Work 1 failed, Error = graph not_suitable_connected_filter graph(0) - pinName:video frame
191m 53.17s: ------------------ convert work failed ------------------
191m 56.19s: UILog:MsgWork:current work finish : 2
191m 56.19s: UILog:Run Work to end.

Just so everyone knows I have only been able to RIP about 1 in 4 blu-rays since the update a few months ago, I regularly have to use 8.2.3.0

[glenns]

Try 9128.I had no problem with my region A blu ray i made a cloned iso it played fine.

[gmalcom69]

Ender's Game

I went ahead and updated the program, and re-ran. It has still failed, if you check the log it also failed on the old version for all is lost and james and the Giant Peach most recently.

OS: Windows 7 Ultimate
CPU: Intel(R) Core(TM) i7-3720QM CPU @2.6-GHz
RAM: 16.0 GB
64-bit Operating System
Dual NVIDIA GeForce GTX 675M

[YESMAN50]

dvdfab_internal

DVDFab 9.1.2.8 (2014/02/20 09:50:49)

0m 00.00s: Init Public log : enabled.
0m 00.00s: Init Private log : finish.
0m 00.01s: App info: 2014-2-19
0m 00.01s: App info: 9.1.2.8 9128 Official
0m 00.01s: Init CrashReportSettings : disabled.
0m 00.01s: Init DVDInfo_Log : enabled.
0m 00.06s: Profile Manager :: Begin Load Profile
0m 00.06s: Qt Translator file load success
0m 00.06s: App info: client type 2.
0m 00.07s: Fabplay load: preload successful.
0m 00.11s: Fabplay load: Load successful.
0m 00.11s: Init process: Transfer settings successful.
0m 00.11s: info: fabcheck logpath= C:/Users/Roginette/Documents/DVDFab9/Log/
0m 00.11s: fab_check_gpu is running ...
0m 00.25s: fab_check_gpu run successful
0m 00.25s: info: recommand= 0, Shrink support= 0, enable= 0, cuda_cap= 0 , cpu_count= 4
0m 00.25s: GPU check: GPUAccelerate-7
0m 00.25s: GPU check: GPUAccelerate setting-0, 0
0m 00.25s: GPU check: CUDA cap-0
0m 00.25s: GPU check: Support coreavc decode-0
0m 00.25s: GPU check: Lighting shrink status-0, 0
0m 00.25s: GPU check: Graphics info 1: AMD Radeon HD 6800 Series : :
0m 00.26s: Init process: Load config successful.
0m 00.26s: Init process: Windows os type is 13.
0m 00.26s: Init process: command line in is
0m 00.29s: Reg check: Parse string: ( 20:8260762964 )( 60:8260762964 )( OV:9128 )( BV:9127 )( S:a93d330d41d5c74c56e6f5fad87b6ca5 )
0m 00.29s: Reg check: Option check status-Local
0m 00.29s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:0 )-( DVD to Mobile:1:0 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:0 )-( File to Mobile:1:0 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:0 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 00.29s: App info: language type ENU.
0m 00.29s: Reg check: Start get sys number.
0m 00.30s: Reg check: Serial number is: 22-08-ca-e4-9d-8d:00-08-ca-e4-9d-8d:c8-60-00-8a-79-01
0m 00.30s: Reg check: Connect type is: 0
0m 00.37s: Init process: Init GPU settings successful.
0m 00.45s: Init preview: Begin init preview play engine.
0m 00.61s: Reg check: Times of connecting error is: 0
0m 00.61s: Reg check: Parse string: ( S:28d8e121d94c4579c85ebf2fccbb2d4e
0m 00.61s: Reg check: Option check status-NewWork
0m 00.81s: Init preview: Init internal engine successful.
0m 01.10s: Profile Manager :: End Load Profile
0m 01.19s: Burn engine: start init.
0m 14.25s: Burn engine: engine type-0.
0m 14.25s: Burn engine: writer count 4.
0m 14.25s: Burn engine: 0- F:\ [HL-DT-ST BD-RE WH12LS38 1.00 (Ide)].
0m 14.25s: Burn engine: 1- G:\ [PIONEER DVD-RW DVR-216D 1.06 (Ide)].
0m 14.25s: Burn engine: 2- H:\ [HL-DT-ST BD-RE BH12LS35 1.01 (Ide)].
0m 14.25s: Burn engine: 3- N:\ [Verbatim Store'n'go U3 6.50 (Usb)].
0m 14.26s: Burn engine: end init.
0m 14.84s: Init process: Init setting page successful.
0m 31.94s: UI manager: switch to Copy mode.
0m 32.28s: Init process: init main ui successful.
0m 32.32s: Init process: show main ui successful.
0m 32.32s: DriveX msg: Init driveX F with I/O mode: 0
0m 32.32s: DriveX msg: Init driveX G with I/O mode: 0
0m 32.32s: DriveX msg: Init driveX H with I/O mode: 0
0m 32.32s: DriveX msg: Init driveX L with I/O mode: 0
0m 32.32s: DriveX msg: Init driveX N with I/O mode: 0
0m 32.33s: opening drive F
0m 32.34s: opened i/o
0m 32.34s: got media type 15
0m 35.11s: got max lba 24203103
0m 36.07s: got disc type 20
0m 36.07s: type Blu-ray BDMV
0m 36.07s: volume label ENDERS_GAME
0m 36.08s: DriveX msg: add media in driveX F.
0m 36.08s: DriveX msg: send open media msg to thread for driveX F.
0m 36.34s: opening drive L
0m 36.34s: opened i/o
0m 36.34s: DriveX msg: media open(false) failed in driveX L.
0m 36.34s: opening drive N
0m 56.51s: opened i/o
0m 56.52s: DriveX msg: media open(false) failed in driveX N.
0m 56.52s: opening drive F
0m 56.52s: opened i/o
0m 56.52s: got media type 15
0m 56.91s: got max lba 24203103
0m 57.88s: got disc type 20
0m 57.88s: type Blu-ray BDMV
0m 57.88s: volume label ENDERS_GAME
0m 57.89s: opening drive G
0m 58.01s: opened i/o
0m 58.07s: opening drive H
0m 58.11s: opened i/o
0m 58.12s: opening drive L
0m 58.12s: opened i/o
0m 58.12s: opening drive N
0m 58.12s: opened i/o
0m 58.12s: Source manager: add source id 0.
0m 58.12s: Open blu-ray disc expired time: 22311011
0m 58.13s: internal path F:/BDMV/
0m 58.33s: aacs 1 bd+ 0
0m 58.66s: got bdmv
1m 01.44s: movie name: ender's game||enders_game
1m 01.45s: got agid 0
1m 01.46s: sent host cert chal
1m 01.46s: got drive cert chal
1m 01.46s: BEC 1
1m 01.46s: DRIVE_VENDOR 0x0074
1m 01.48s: got drive key
1m 01.49s: got host key signature
1m 01.49s: verified drive signature
1m 01.49s: verified host signature
1m 01.51s: sent host signature and key point
1m 01.51s: got bus key
1m 01.51s: got volume id
1m 01.51s: got volume id mac
1m 01.51s: volume id is correct
1m 01.52s: got vid
1m 01.65s: blu-ray F9313045980C0680361CCA6D2FBE8D3DD55081E5
1m 02.09s: cert BEE=0x00 same
1m 03.21s: D 471EB2CC
1m 03.22s: main playlist 00615.mpls
1m 03.22s: selected region A
1m 03.22s: got vuk
1m 03.22s: got unit key 4
1m 12.08s: got bdmv
1m 29.70s: got extended bdinfo
1m 29.70s: opened blu-ray
1m 30.06s: Source manager: open successful.
1m 30.40s: Work manager: create BD mainmoive work 0 with source 0 and uiinfo 0.
3m 03.11s: UILog:OnMsgToolbar_Start
3m 03.14s: UILog:Msg Start : ready start
3m 03.14s: UILog:Msg Start : start test run work
3m 03.15s: UILog:right button to null, work falg = -1
3m 03.16s: UILog:Msg Start : run work
3m 03.16s: UILog:Run current Work.
3m 03.38s: UILog:Begin work copy or converter.
3m 03.39s: UILog:start running at thread.
3m 03.40s: UILog:return flag at start running at thread ok.
3m 03.48s: BD MainMovie watermark flag: 0
3m 03.48s: UILog:MsgWork:WorkStatus_Start
8m 37.60s: Blu-ray Copy: Main Movie
8m 37.60s: Source: F:/BDMV/
8m 37.60s: Playlist: 615
8m 37.60s: Chapters: 1 -> 17
8m 37.60s: TotalSize: 34813 MB
8m 37.60s: SourceSize: 34813 MB
8m 37.60s: RemoveHDAudio: 0
8m 37.60s: CompressToAC3: 0
8m 37.60s: OutputSize: 23000 MB
8m 37.60s: OutputDisc: BDMV
8m 37.61s: OutputTarget: BD25
8m 37.61s: OutputVideo: 1080p/i
8m 37.61s: info: enable bd copy(mode=0)
8m 37.61s: info: estimate copied other streams size(5962 MB), estimate output video size(16807 MB)
8m 37.61s: info: video encode mode(0), bitrate(19772), lr-encode(yes)
8m 37.61s: info: streams(4113.2)
8m 37.61s: info: blu-ray copy begin (unit[elem[atomic[00506.m2ts],atomic[00508.m2ts],atomic[00505.m2ts],atomic[00501.m2ts],atomic[00514.m2ts],atomic[00516.m2ts],atomic[00519.m2ts],atomic[00507.m2ts],atomic[00502.m2ts],atomic[00509.m2ts],atomic[00510.m2ts],atomic[00512.m2ts],atomic[00511.m2ts],atomic[00513.m2ts],atomic[00515.m2ts]]])
8m 37.62s: Lightning-Recoding (accelerate H.264 software decoding and encoding) enabled
8m 37.64s: info: enable multi-thread software decoder, thread count = 4
8m 38.71s: info: h264_encode: encode param profile(2) level(41) bitrate(19772) crf(-1)
8m 42.74s: info: processing source(00506.m2ts)
10m 51.11s: info: processing source(00508.m2ts)
11m 05.97s: info: processing source(00505.m2ts)
11m 27.54s: info: processing source(00501.m2ts)
21m 38.22s: info: processing source(00514.m2ts)
21m 51.56s: info: processing source(00516.m2ts)
22m 21.47s: info: processing source(00519.m2ts)
22m 37.85s: info: processing source(00507.m2ts)
23m 56.40s: info: processing source(00502.m2ts)
24m 06.96s: info: processing source(00509.m2ts)
24m 45.18s: info: processing source(00510.m2ts)
25m 02.99s: info: processing source(00512.m2ts)
25m 11.88s: info: processing source(00511.m2ts)
25m 32.32s: info: processing source(00513.m2ts)
25m 41.62s: info: processing source(00515.m2ts)
42m 52.16s: read error: 11 12198944 17968060 12209726 515
64m 34.04s: read error: 11 12198944 17968060 12209726 515
64m 59.74s: read error: 11 12198944 17968060 12209756 515
97m 05.92s: info: group(elem[atomic[00506.m2ts],atomic[00508.m2ts],atomic[00505.m2ts],atomic[00501.m2ts],atomic[00514.m2ts],atomic[00516.m2ts],atomic[00519.m2ts],atomic[00507.m2ts],atomic[00502.m2ts],atomic[00509.m2ts],atomic[00510.m2ts],atomic[00512.m2ts],atomic[00511.m2ts],atomic[00513.m2ts],atomic[00515.m2ts]]) playtime(6828855 ms) source(34813 MB) request(22770 MB) real(17065 MB) bitrate(19772 kbps)
97m 05.93s: compress finished: groups request(22770 MB, 22770 MB) real(17065 MB) average_bitrate(19772 kbps)
97m 16.01s: UILog:MsgWork:current work finish : 3
97m 16.01s: UILog:Run Work to end.
97m 16.04s: connect 0 : start.
97m 16.09s: connect 0 : 1:1
97m 26.94s: DriveX msg: remove media in driveX F.

[90312]

yesman50 you have read errors, try cleaning the disc. But it could be manufacturing defects in which case you need to trade it for another.

[glenns]

Also try a cleaning disk or compressed air as maybe your laser got some dust on it causing read errors.

[glenns]

Gmalcome69:I keep seeing this in your logs:

189m 53.07s: no enough free sectors for 00002.jar, available 0, sectors required 1
189m 53.11s: no enough free sectors for 00006.jar, available 0, sectors required 2
189m 53.16s: no enough free sectors for 03001.jar, available 0, sectors required 2

I don't know what it means but just in case do you have at least 50 gigs on your hard drive of free space?
Try turning off lightning shrink (unchecking the box) and use all software
If all fails send in just the log using Fab 9128 with all software and no lighting shrink to staff here