DVD jumpy playback

[W&B]

Used the cheapest DVD's and burnt them at the highest speed

Don't do that, never do that lol. Regardless of your media choice slow the burn rate to half of the rated speed of your media otherwise it's 'russian roulette'.

[eon_designs]

I would normally use good discs and a very low burn speed 2x or 4x. I used the rubbish discs and fast speed as a worst case scenario. If it worked that way then it will surely work on better discs.

[CBR929]

I would normally use good discs and a very low burn speed 2x or 4x. I used the rubbish discs and fast speed as a worst case scenario. If it worked that way then it will surely work on better discs.

Hi eon_designs
I agree with W&B if you burned it and it had "Stutters" you would still be saying that it is not fixed
CBR929

[W&B]

Hi eon_designs
I agree with W&B if you burned it and it had "Stutters" you would still be saying that it is not fixed
CBR929

Yep, you have to rule out all possible causes in order to test correctly

[eon_designs]

I was working from the other way around - try it in the worst case, if it works then great (whidh it did - thankfully) If it didn't then work through the buring route.

Trying a few other conversions now to see how it handles subtitles, especially forced subtitles.

:-)

[docgoo1]

When playing a DVD on my TV I have noticed some jumpy playback, but only on the TV.

Burnt several discs using the different engines (VSO and ImgBurn) and at different speeds. Went right down to 2x and still get the jumpy playback.

Its not horrendously bad, but once you notice it, it spoils the viewing experience.

Does anyone else have this issue? Can it be fixed?

I have the same problem of jerky video on blu ray to dvd.
DVDFab 8.0.6.7 (2011/01/04 07:53:01)

0m 00.74s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 09.61s: detected blu-ray
0m 09.61s: drive D
0m 09.61s: blu-ray type 1
0m 09.61s: volume label DEVIL
0m 11.02s: detected blu-ray
0m 11.02s: drive E
0m 11.02s: blu-ray type 1
0m 11.02s: volume label REPO_MEN
0m 22.79s: root 8CD37735B6B1D701_VOLUME_SET_IDEVILEVILEVIL
0m 24.30s: aacs 1 bd+ 0
0m 25.66s: got discinfo
0m 25.69s: got bdmv
0m 25.75s: got agid 0
0m 26.03s: sent host cert chal
0m 26.34s: got drive cert chal
0m 26.78s: got drive key
0m 27.19s: got host key signature
0m 27.19s: verified drive signature
0m 27.19s: verified host signature
0m 27.72s: sent host signature and key point
0m 27.72s: got bus key
0m 27.76s: got volume id
0m 27.76s: got volume id mac
0m 27.76s: volume id is correct
0m 27.78s: got vid
0m 27.86s: blu-ray 733ED543CB9D7417D31810EC22E9F45DD8B0EB94
0m 28.79s: D 3D8839FD
0m 28.81s: got vuk
0m 28.87s: got unit key 7
0m 56.45s: got extended bdinfo
0m 56.45s: opened blu-ray
14m 39.70s: detected blu-ray
14m 39.72s: drive E
14m 39.72s: blu-ray type 0
14m 39.72s: volume label
17m 08.85s: detected blu-ray
17m 08.87s: drive E
17m 08.87s: blu-ray type 0
17m 08.87s: volume label
21m 22.57s: Blu-ray Copy: Full Disc
21m 22.57s: Source: D:\BDMV\
21m 22.57s: SourceSize: 24034 MB
21m 22.57s: RemoveHDAudio: 0
21m 22.59s: OutputTarget: BD25
21m 22.59s: OutputVideo: 1080p/i
21m 23.63s: Video reencode bitrate (15533 kbps)
21m 23.63s: compress begin: Blu-ray groups clips(00001.m2ts), playtime(14014 ms), size(29 MB)
21m 23.63s: processing source(00001.m2ts)
21m 23.63s: try to use gpu acceleration(1) for video decoding
21m 23.63s: CUDA GPU acceleration for video decoding enabled
21m 24.76s: h264_encode: encode param profile(2) level(41) bitrate(15533)
21m 49.14s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
21m 56.14s: group(00001.m2ts ) playtime(14014 ms) source(29 MB) request(28 MB) real(25 MB) bitrate(15533 kbps)
21m 56.16s: compress finished: groups request(28 MB, 28 MB) real(25 MB) average_bitrate(15533 kbps)
21m 57.99s: Video reencode bitrate (18618 kbps)
21m 57.99s: compress begin: Blu-ray groups clips(00000.m2ts), playtime(23648 ms), size(61 MB)
21m 57.99s: processing source(00000.m2ts)
21m 57.99s: try to use gpu acceleration(1) for video decoding
21m 57.99s: CUDA GPU acceleration for video decoding enabled
21m 59.00s: h264_encode: encode param profile(2) level(41) bitrate(18618)
22m 26.85s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
22m 33.85s: group(00000.m2ts ) playtime(23648 ms) source(61 MB) request(57 MB) real(54 MB) bitrate(18618 kbps)
22m 33.87s: compress finished: groups request(57 MB, 57 MB) real(54 MB) average_bitrate(18618 kbps)
22m 34.05s: Video reencode bitrate (18618 kbps)
22m 34.05s: compress begin: Blu-ray groups clips(50057.m2ts), playtime(23648 ms), size(61 MB)
22m 34.05s: processing source(50057.m2ts)
22m 34.07s: try to use gpu acceleration(1) for video decoding
22m 34.07s: CUDA GPU acceleration for video decoding enabled
22m 35.08s: h264_encode: encode param profile(2) level(41) bitrate(18618)
23m 02.98s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
23m 10.32s: group(50057.m2ts ) playtime(23648 ms) source(61 MB) request(57 MB) real(54 MB) bitrate(18618 kbps)
23m 10.35s: compress finished: groups request(57 MB, 57 MB) real(54 MB) average_bitrate(18618 kbps)
23m 12.15s: Video reencode bitrate (18618 kbps)
23m 12.15s: compress begin: Blu-ray groups clips(50058.m2ts), playtime(23648 ms), size(61 MB)
23m 12.15s: processing source(50058.m2ts)
23m 12.15s: try to use gpu acceleration(1) for video decoding
23m 12.15s: CUDA GPU acceleration for video decoding enabled
23m 13.16s: h264_encode: encode param profile(2) level(41) bitrate(18618)
23m 40.99s: info: filter(505.04), reach the mux end, something not out(1 - 0), drop it
23m 48.00s: group(50058.m2ts ) playtime(23648 ms) source(61 MB) request(57 MB) real(54 MB) bitrate(18618 kbps)
23m 48.03s: compress finished: groups request(57 MB, 57 MB) real(54 MB) average_bitrate(18618 kbps)
23m 48.25s: Video reencode bitrate (18642 kbps)
23m 48.25s: compress begin: Blu-ray groups clips(50132.m2ts), playtime(37912 ms), size(97 MB)
23m 48.28s: processing source(50132.m2ts)
23m 48.28s: try to use gpu acceleration(1) for video decoding
23m 48.28s: CUDA GPU acceleration for video decoding enabled
23m 49.32s: h264_encode: encode param profile(2) level(41) bitrate(18642)
24m 24.35s: group(50132.m2ts ) playtime(37912 ms) source(97 MB) request(91 MB) real(85 MB) bitrate(18642 kbps)
24m 24.36s: compress finished: groups request(91 MB, 91 MB) real(85 MB) average_bitrate(18642 kbps)
24m 57.31s: Blu-ray Copy: Main Movie
24m 57.32s: Source: D:\BDMV\
24m 57.32s: Playlist: 800
24m 57.32s: Chapters: 1 -> 21
24m 57.32s: SourceSize: 20546 MB
24m 57.32s: RemoveHDAudio: 0
24m 57.32s: OutputTarget: BD25
24m 57.32s: OutputVideo: 1080p/i
24m 57.32s: compress begin: Blu-ray groups clips(00010.m2ts), playtime(4828657 ms), size(20546 MB)
24m 57.34s: processing source(00010.m2ts)
27m 10.35s: Blu-ray Copy: Main Movie
27m 10.35s: Source: D:\BDMV\
27m 10.36s: Playlist: 800
27m 10.36s: Chapters: 1 -> 21
27m 10.36s: SourceSize: 20546 MB
27m 10.36s: RemoveHDAudio: 0
27m 10.36s: OutputTarget: BD25
27m 10.36s: OutputVideo: 1080p/i
27m 10.38s: compress begin: Blu-ray groups clips(00010.m2ts), playtime(4828657 ms), size(20546 MB)
27m 10.39s: processing source(00010.m2ts)

[the white wolf]

Hi docgoo1

I used to have the same problem, sttuter video in my converted discs, but since version 8.0.6.1. this problem was addressed and fixed, so try this, maybe will help you, click on the green dot with a mark on it,in top right of the maine screen of the program, then on new window (Common settings)click on your left A/V Codec, then in your right side select for video decoder and video encoder "sofware" in all of them 4 in total, click ok and try it with this options to see if that fix your problem. if not, post back again your logo and someone else with more experiance will try to give you more advices,

That set up worked for me, so. hope that works for you too.

Tony

[docgoo1]

Thanks but I am allready aware of using software for this process. Only one problem with this is 95% cpu usage. My computer can hadle this running core i7 quad core. I have a high end Nvidia video card. Therefore you should be able to use gpu accelleration enabled without these problems. Thanks again for the post.