Announcement

**CBR929** · 02-18-2011, 09:11 PM

Hi blacksky
This may or may not have anything to do with your problem but, do you have any on the fly decrypters running in the back ground???

Reason for asking is there seems to be no encryption on these disc's.
0m 06.47s: aacs 0 bd+ 0
0m 16.87s: aacs 0 bd+ 0
0m 05.86s: aacs 0 bd+ 0
CBR929

**blacksky** · 02-18-2011, 09:23 PM

On the fly decoders

I did use [other software] to decode this and then used IMGBurn and Nero to burn a perfect copies of the full disc. I tried using the saved files and the discs I burnt with DVDFab but got the same results. I have been working on this movie for a month. Just when I thought that I had it worked out, I ended up with the foriegn language vs. I stepped back for awhile and Im at it again. I want to convert this with DVDFab? I love this program, even with the occasional bug it keeps my learning curve on it's game (:

**CBR929** · 02-18-2011, 09:27 PM

Passkey, "XXX DVD" other software.

**blacksky** · 02-18-2011, 09:59 PM

Passkey, "XXX DVD" other software.

I take it this means that there was other software running at the same time? Would running Convert X to DVD running at the same time have caused this? Im running DVDFab again, there is nothing decoder wise running in the background.

**blacksky** · 02-18-2011, 11:59 PM

Logs from last pass don't want another coaster

Didn't want to burn another coaster...

DVDFab 8.0.7.3 (2011/02/18 12:29:17)

0m 01.34s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 52.88s: detected blu-ray
0m 52.88s: drive D
0m 52.88s: blu-ray type 1
0m 52.88s: volume label TGW_KICKED_THE_HORNETS_NEST
0m 54.64s: root 3E51447800A41DAF:TGW_KICKED_THE_HORNETS_NEST:TGW_K ICKED_THE_HORNETS_NEST:TGW_KICKED_THE_HORNETS_NEST
0m 54.75s: aacs 0 bd+ 0
0m 54.77s: got discinfo
0m 54.81s: got bdmv
1m 21.10s: got extended bdinfo
1m 21.10s: opened blu-ray
3m 42.84s:

------ begin mobile work(1/2) ------

3m 42.84s: create config(5)
3m 42.84s: convert profile(dvd.vob)
3m 42.84s: blu-ray playlist(1) angle(0) chapter(1->16)
3m 42.84s: stream(4113,AVC,1) stream(4353,AC3,1) stream(4608,PGS,4)
3m 58.07s: info: set output video frame_rate(24000/1001)
3m 58.10s: processing source(00001.m2ts)
3m 58.10s: using software decoder(h264 multi-thread)
4m 01.19s: subpicture(4608) mode(1)
4m 04.89s: processing source(00000.m2ts)
4m 09.36s: ------ cancel all mobile work -------

DVDFab 8.0.7.3 (2011/02/18 12:34:29)

0m 00.85s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 03.02s: detected blu-ray
0m 03.02s: drive D
0m 03.02s: blu-ray type 1
0m 03.02s: volume label TGW_KICKED_THE_HORNETS_NEST
0m 04.14s: root 3E51447800A41DAF:TGW_KICKED_THE_HORNETS_NEST:TGW_K ICKED_THE_HORNETS_NEST:TGW_KICKED_THE_HORNETS_NEST
0m 04.25s: aacs 0 bd+ 0
0m 04.27s: got discinfo
0m 04.30s: got bdmv
0m 08.28s: got extended bdinfo
0m 08.28s: opened blu-ray
0m 19.21s:

------ begin mobile work(1/2) ------

0m 19.21s: create config(5)
0m 19.21s: convert profile(dvd.vob)
0m 19.21s: blu-ray playlist(1) angle(0) chapter(1->16)
0m 19.21s: stream(4113,AVC,1) stream(4353,AC3,1) stream(4608,PGS,4)
0m 19.21s: info: set output video frame_rate(24000/1001)
0m 19.25s: processing source(00001.m2ts)
0m 19.25s: using software decoder(h264 multi-thread)
0m 22.30s: subpicture(4608) mode(1)
0m 26.42s: processing source(00000.m2ts)
171m 05.95s: processing source(00017.m2ts)
171m 10.45s: audio_encode finish job
172m 11.71s: info: set output video frame_rate(24000/1001)
172m 15.51s:

------ finish mobile work ------

172m 16.40s:

------ begin mobile work(2/2) ------

172m 16.40s: create config(-1)
172m 16.40s: convert profile(dvd.vob)
173m 19.90s: detected blu-ray
173m 19.90s: drive D
173m 19.90s: blu-ray type 1
173m 19.90s: volume label Iron Man
183m 25.23s: detected dvd
183m 25.23s: drive D
183m 25.23s: dvd type 0
183m 25.23s: volume label
187m 18.12s: detected dvd
187m 18.14s: drive D
187m 18.14s: dvd type 0
187m 18.14s: volume label

**CBR929** · 02-19-2011, 02:50 AM

I am not sure as to what is going on but these logs also say that there is no encryption on the disc.

CBR929

**blacksky** · 02-19-2011, 06:45 AM

Originally posted by CBR929 View Post

I am not sure as to what is going on but these logs also say that there is no encryption on the disc.

CBR929

Burnt another coaster...

**blacksky** · 02-19-2011, 03:04 PM

One more time?

90m 37.24s: detected dvd
290m 37.27s: drive F
290m 37.29s: dvd type 1
290m 37.29s: volume label TGW_KICKED_THE_HORNETS_NEST

DVDFab 8.0.7.3 (2011/02/18 22:37:01)

0m 01.04s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1

DVDFab 8.0.7.3 (2011/02/18 22:46:52)

0m 00.87s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 36.69s: detected blu-ray
0m 36.69s: drive D
0m 36.69s: blu-ray type 1
0m 36.69s: volume label TGW_KICKED_THE_HORNETS_NEST
0m 37.73s: root 0425DF99 TGW_KICKED_THE_HORNETS_NEST:TGW_KICKED_THE_HORNETS _NEST:TGW_KICKED_THE_HORNETS_NEST:TGW_KICKED_THE_H ORNETS_NEST
0m 38.06s: aacs 1 bd+ 0
0m 38.11s: got discinfo
0m 38.15s: got bdmv
0m 38.17s: got agid 0
0m 38.25s: sent host cert chal
0m 38.25s: got drive cert chal
0m 38.25s: BEC 0
0m 38.25s: DRIVE_VENDOR 0x0103
0m 38.31s: got drive key
0m 38.73s: got host key signature
0m 38.73s: verified drive signature
0m 38.73s: verified host signature
0m 38.78s: sent host signature and key point
0m 38.78s: got bus key
0m 39.12s: got volume id
0m 39.12s: got volume id mac
0m 39.12s: volume id is correct
0m 39.12s: got vid
0m 39.23s: blu-ray FE10993E682DB9BA44835A373172F68DF3F6B5AB
0m 39.90s: D AF136685
0m 39.90s: got vuk
0m 39.90s: got unit key 1
0m 45.98s: got extended bdinfo
0m 45.98s: opened blu-ray
1m 04.13s:

------ begin mobile work(1/2) ------

1m 04.13s: create config(5)
1m 04.13s: convert profile(dvd.vob)
1m 04.13s: blu-ray playlist(1) angle(0) chapter(1->16)
1m 04.14s: stream(4113,AVC,1) stream(4353,AC3,1) stream(4608,PGS,4)
1m 04.14s: info: set output video frame_rate(24000/1001)
1m 04.17s: processing source(00001.m2ts)
1m 04.17s: CoreAVC for video decoding enabled
1m 07.34s: subpicture(4608) mode(1)
1m 10.23s: processing source(00000.m2ts)
133m 54.17s: processing source(00017.m2ts)
133m 58.09s: audio_encode finish job
134m 57.77s: info: set output video frame_rate(24000/1001)
135m 01.55s:

------ finish mobile work ------

135m 02.94s:

------ begin mobile work(2/2) ------

135m 02.94s: create config(-1)
135m 02.94s: convert profile(dvd.vob)
471m 28.64s: detected dvd
471m 28.66s: drive D
471m 28.66s: dvd type 0
471m 28.66s: volume label
473m 42.52s:

------ finish mobile work ------

I 06:38:25 ImgBurn Version 2.5.5.0 started!
I 06:38:25 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)
I 06:38:25 Total Physical Memory: 8,387,704 KB - Available: 6,675,280 KB
I 06:38:25 Initialising SPTI...
I 06:38:25 Searching for SCSI / ATAPI devices...
I 06:38:25 -> Drive 1 - Info: ATAPI DVD D DH16D2S EP52 (F

(ATA)
I 06:38:25 -> Drive 2 - Info: PIONEER BD-RW BDR-206 1.02 (D

(ATA)
I 06:38:25 Found 1 DVD-ROM and 1 BD-RE!
I 06:38:26 Operation Started!
I 06:38:26 Building Image Tree...
I 06:38:26 Checking Directory Depth...
I 06:38:26 Calculating Totals...
I 06:38:26 Preparing Image...
E 06:39:36 Image may be too big to fit on the target DVD media.
E 06:39:36 Operation Failed! - Duration: 00:01:10
I 06:39:57 Close Request Acknowledged
I 06:39:57 Closing Down...
I 06:39:57 Shutting down SPTI...
I 06:39:57 ImgBurn closed!

**unknownbluray** · 04-20-2011, 05:30 AM

" 06:39:36 Image may be too big to fit on the target DVD media."

Simple your image is too big to fit on the dvd. I personally havent had this problem (probably will now that I said i but I bevieve you need to customize the file size to fit on the blank dvd.

**signals** · 04-20-2011, 03:03 PM

Originally posted by blacksky View Post

I take it this means that there was other software running at the same time? Would running Convert X to DVD running at the same time have caused this? Im running DVDFab again, there is nothing decoder wise running in the background.

ConvertX is not a decrypter. Something more like Passkey or other on-the-fly decrypter. I would not run ConvertX at the same time as DVDFab in any event due to possible drive accesss conflicts in SPTI, AHCI etc.

Announcement

Audio out of sync on (tgwkthn)

Audio out of sync on (tgwkthn)

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment