Trouble with converting bluray to dvd

[ripvanwinkle1819]

Hi guys wondered if you can help. trying to convert my 300 bluray to a dvd. About 3secs into the conversion process my laptop just dies. I mean completely shuts down.

checked cpu temp np. cool as ice. tried to get a log so i can post it nothing shows in the dvdfab log. i am running windows home and have converted before np, until now. i have ripped it to an iso and tried to convert from that but still same thing. have tried different fill formats and still same. But no log is posted in dvd fab records. wierd. any ideas or a link to other posts. tried looking around forum but may have missed it thanks.

regards rip.

[ripvanwinkle1819]

sorry

i am using version 8.2.2.6 sorry to double post.

[Ning]

Hi,
Please update your graphics driver and try again.
You can also download DVDFab version 9 and have a try.

Thank you.

ning.

[ripvanwinkle1819]

Hi,
Please update your graphics driver and try again.
You can also download DVDFab version 9 and have a try.

Thank you.

ning.

i will have a go and post back. Thank you for your help.

[ripvanwinkle1819]

Okay I finally have been able to produce a log. This is what I have so far. I am trying to convert Hidalgo bluray to dvd 9.

1. uninstalled all dvdfab software used unistaller software.
2. installed 9.0.2.2 on my lap top.Tried video converter application and after hitting start send an error report to dvdfab came up. But laptop froze.
3. unintsalled 9.0.2.2 and re installed 8.2.2.6.
4. tried to up date my video card it is an nvidia geforce 310m
5. In common settings for 8.2.2.6 under the avcodec i unselected the lightning-recoding ( was throwing a bone at this point)
6. conversion hits around 2 % then completely shuts my laptop off.
7. last time it happened i got a task failed error I believe it read 504. or 404.
hard to tell when screen goes blank 2 secs later.


here is my log.

DVDFab 8.2.2.6 (2013/01/31 09:45:41)

0m 03.04s: GPUAccelerate: 12351
0m 03.05s: CUDA cap: 0
0m 03.05s: Support coreavc decode: 0
0m 03.05s: Graphics info: NVIDIA GeForce 310M : 2.20 : 1.2
0m 03.05s: Qt Translator file load success
0m 03.93s: Load config successful.
0m 04.25s: Init profile data driver sucessful.
0m 09.42s: Init GPU settings sucessful.
0m 09.42s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 0 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 0
0m 09.42s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 09.98s: Config ExBar successful.
0m 09.98s: dvd2dvd have 8 elements.
0m 10.18s: dvd2mobile have 31 elements.
0m 11.10s: blu-ray2blu-ray have 4 elements.
0m 11.13s: blu-ray2mobile have 21 elements.
0m 11.13s: blu-ray23d have 7 elements.
0m 11.31s: blu-ray2dvd have 1 elements.
0m 11.35s: file2mobile have 30 elements.
0m 12.21s: file2dvd have 1 elements.
0m 12.24s: file2bluray have 1 elements.
0m 12.49s: Config work ui controls successful.
0m 13.79s: Init burn engine successful.
0m 13.90s: StartNotify successful.
0m 13.90s: opening drive E
0m 13.90s: opened i/o
0m 13.90s: got media type 15
0m 19.26s: got max lba 18950047
0m 20.04s: got disc type 20
0m 20.04s: type Blu-ray BDMV
0m 20.05s: volume label DLG1NNE1
0m 20.07s: opening drive E
0m 20.07s: opened i/o
0m 20.68s: got max lba 18950047
0m 21.50s: got disc type 20
0m 21.50s: internal path E:/BDMV/
0m 21.55s: aacs 1 bd+ 0
0m 29.46s: Java protection is removed by StealthyClone anti-protection.
0m 29.59s: got discinfo
0m 31.33s: got bdmv
0m 31.33s: Vendor: TSSTcorp
0m 31.33s: Product: DVDWBD TS-LB23A
0m 31.33s: Revision: SC00
0m 31.33s: Vendor specific: 1022
0m 31.33s: AACS version: 1
0m 31.33s: Number of concurrent AGIDs: 2
0m 31.33s: Supports bus encryption: NO
0m 31.33s: Supports binding nonce generation: NO
0m 31.33s: Supports Hybrid discs: NO
0m 31.33s: got agid 0
0m 31.40s: sent host cert chal
0m 31.41s: got drive cert chal
0m 31.41s: BEC 0
0m 31.41s: DRIVE_VENDOR 0x0386
0m 31.49s: got drive key
0m 31.82s: got host key signature
0m 31.82s: verified drive signature
0m 31.82s: verified host signature
0m 31.89s: sent host signature and key point
0m 31.89s: got bus key
0m 31.91s: got agid 0
0m 31.97s: sent host cert chal
0m 31.99s: got drive cert chal
0m 31.99s: BEC 0
0m 31.99s: DRIVE_VENDOR 0x0386
0m 32.07s: got drive key
0m 32.07s: got host key signature
0m 32.07s: verified drive signature
0m 32.07s: verified host signature
0m 32.14s: sent host signature and key point
0m 32.14s: got bus key
0m 35.67s: got volume id
0m 35.67s: got volume id mac
0m 35.67s: volume id is correct
0m 35.70s: got vid
0m 37.21s: blu-ray A98B44988126A5F896AF7A632EDE56E42EED3D99
0m 37.90s: cert BEE=0x00 same
0m 39.34s: D 498E4287
0m 39.34s: got vuk
0m 39.65s: got unit key 1
0m 52.67s: got extended bdinfo
0m 52.67s: opened blu-ray
0m 52.75s: WorkAttr::Init Start
0m 52.80s: WorkAttr::Init OK: DVD_VOB


DVDFab 8.2.2.6 (2013/01/31 09:47:42)

0m 01.64s: GPUAccelerate: 12351
0m 01.64s: CUDA cap: 0
0m 01.65s: Support coreavc decode: 0
0m 01.65s: Graphics info: NVIDIA GeForce 310M : 2.20 : 1.2
0m 01.65s: Qt Translator file load success
0m 01.69s: Load config successful.
0m 01.78s: Init profile data driver sucessful.
0m 04.28s: Init GPU settings sucessful.
0m 04.28s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 0 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 0
0m 04.28s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.56s: Config ExBar successful.
0m 04.56s: dvd2dvd have 8 elements.
0m 04.70s: dvd2mobile have 31 elements.
0m 05.59s: blu-ray2blu-ray have 4 elements.
0m 05.62s: blu-ray2mobile have 21 elements.
0m 05.62s: blu-ray23d have 7 elements.
0m 05.80s: blu-ray2dvd have 1 elements.
0m 05.84s: file2mobile have 30 elements.
0m 06.71s: file2dvd have 1 elements.
0m 06.72s: file2bluray have 1 elements.
0m 06.97s: Config work ui controls successful.
0m 06.97s: Init burn engine successful.
0m 07.05s: StartNotify successful.
0m 07.05s: opening drive E
0m 07.05s: opened i/o
0m 07.05s: got media type 15
0m 10.96s: got max lba 18950047
0m 12.05s: got disc type 20
0m 12.05s: type Blu-ray BDMV
0m 12.05s: volume label DLG1NNE1
0m 12.08s: opening drive E
0m 12.08s: opened i/o
0m 12.80s: got max lba 18950047
0m 13.87s: got disc type 20
0m 13.87s: internal path E:/BDMV/
0m 13.95s: aacs 1 bd+ 0
0m 23.90s: Java protection is removed by StealthyClone anti-protection.
0m 23.98s: got discinfo
0m 25.85s: got bdmv
0m 25.87s: Vendor: TSSTcorp
0m 25.87s: Product: DVDWBD TS-LB23A
0m 25.87s: Revision: SC00
0m 25.87s: Vendor specific: 1022
0m 25.87s: AACS version: 1
0m 25.87s: Number of concurrent AGIDs: 2
0m 25.87s: Supports bus encryption: NO
0m 25.87s: Supports binding nonce generation: NO
0m 25.87s: Supports Hybrid discs: NO
0m 25.87s: got agid 1
0m 25.93s: sent host cert chal
0m 25.93s: got drive cert chal
0m 25.93s: BEC 0
0m 25.93s: DRIVE_VENDOR 0x0386
0m 26.03s: got drive key
0m 26.34s: got host key signature
0m 26.34s: verified drive signature
0m 26.35s: verified host signature
0m 26.42s: sent host signature and key point
0m 26.43s: got bus key
0m 26.43s: got agid 1
0m 26.49s: sent host cert chal
0m 26.51s: got drive cert chal
0m 26.51s: BEC 0
0m 26.51s: DRIVE_VENDOR 0x0386
0m 26.59s: got drive key
0m 26.59s: got host key signature
0m 26.59s: verified drive signature
0m 26.59s: verified host signature
0m 26.67s: sent host signature and key point
0m 26.67s: got bus key
0m 30.27s: got volume id
0m 30.27s: got volume id mac
0m 30.27s: volume id is correct
0m 30.30s: got vid
0m 31.83s: blu-ray A98B44988126A5F896AF7A632EDE56E42EED3D99
0m 32.47s: cert BEE=0x00 same
0m 33.70s: D 498E4287
0m 33.72s: got vuk
0m 33.98s: got unit key 1
0m 47.05s: got extended bdinfo
0m 47.05s: opened blu-ray
0m 47.13s: WorkAttr::Init Start
0m 47.18s: WorkAttr::Init OK: DVD_VOB
1m 07.41s:


------ begin mobile work(1/1) ------


1m 07.41s: create config(5)
1m 07.43s: info: convert profile(DVD_VOB)
1m 07.43s: info: bluray playlist(1),angle(0),chapter(1->19),3D(0)
1m 07.43s: info: streams((4113.2)(4352.2)(4608.1)(4609.1)(4610.1)(4 611.1)(4612.1)(4613.1)(4614.1)(4615.1)(4616.1)(461 7.1)(4618.1)(4619.1)(4620.1)(4621.1))
1m 07.43s: info: set output video frame_rate(24000/1001)
1m 07.43s: info: subpicture preset(4), mode(4)
1m 07.43s: info: subpicture preset(4), mode(4)
1m 07.43s: info: subpicture preset(4), mode(4)
1m 07.43s: info: subpicture preset(4), mode(4)
1m 07.45s: info: subpicture preset(4), mode(4)
1m 07.45s: info: subpicture preset(4), mode(4)
1m 07.45s: info: subpicture preset(4), mode(4)
1m 07.45s: info: subpicture preset(4), mode(4)
1m 07.45s: info: subpicture preset(4), mode(4)
1m 07.45s: info: subpicture preset(4), mode(4)
1m 07.45s: info: subpicture preset(4), mode(4)
1m 07.45s: info: subpicture preset(4), mode(4)
1m 07.45s: info: subpicture preset(4), mode(4)
1m 07.45s: info: subpicture preset(4), mode(4)
1m 07.45s: info: enable multi-thread software decoder
1m 07.91s: subpicture(4608) mode(4)
1m 07.93s: info: processing source(00006.m2ts)


DVDFab 8.2.2.6 (2013/01/31 09:55:57)

0m 02.63s: GPUAccelerate: 12351
0m 02.65s: CUDA cap: 0
0m 02.65s: Support coreavc decode: 0
0m 02.65s: Graphics info: NVIDIA GeForce 310M : 2.20 : 1.2
0m 02.66s: Qt Translator file load success
0m 03.51s: Load config successful.
0m 03.80s: Init profile data driver sucessful.
0m 09.34s: Init GPU settings sucessful.
0m 09.36s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 0 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 0
0m 09.36s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 09.89s: Config ExBar successful.
0m 09.90s: dvd2dvd have 8 elements.
0m 10.09s: dvd2mobile have 31 elements.
0m 11.00s: blu-ray2blu-ray have 4 elements.
0m 11.03s: blu-ray2mobile have 21 elements.
0m 11.03s: blu-ray23d have 7 elements.
0m 11.21s: blu-ray2dvd have 1 elements.
0m 11.24s: file2mobile have 30 elements.
0m 12.12s: file2dvd have 1 elements.
0m 12.15s: file2bluray have 1 elements.
0m 12.41s: Config work ui controls successful.
0m 12.52s: Init burn engine successful.
0m 12.63s: StartNotify successful.
0m 12.65s: opening drive E
0m 12.65s: opened i/o
0m 12.66s: got media type 15
0m 17.73s: got max lba 0
0m 18.78s: opening drive E
0m 19.06s: opened i/o
0m 19.07s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 19.20s: got max lba 0

[CBR929]

Hi ripvanwinkle1819
Did you also clean the registry after the uninstall?
If not use CCleaner to scrub the registry until nothing is found then reinstall the latest beta found here
Hope this helps
CBR929

[ripvanwinkle1819]

Hi ripvanwinkle1819
Did you also clean the registry after the uninstall?
If not use CCleaner to scrub the registry until nothing is found then reinstall the latest beta found here
Hope this helps
CBR929

I did a complete clean and and using an unistaller program. I tried the newer version 9.0.2.3 but as beforelaptop freezes up. I thought maybe my bluray burner crapped out but it.s funny i can make an iso of bluray np. strange. But I have converted a bluray before i believe it was transformers and np with this mind you i was using a previous version.

[CBR929]

Hi ripvanwinkle1819
Were you able to update your graphics card?
Make sure that you disable all GPU in Fab settings.

If you can remember what version you were using before send me a pm with your e-mail address and I will be happy to send it to you.
CBR929

[ripvanwinkle1819]

I tried to update my video card but i have the latest driver available even wen on nvidia web site. I tried a few setting changes like. disabling the gpu and even disabled the lightning cpu acceleration. no luck still crashes at around 2.02%. Strange. Now not to sound anti fab or anything but I loaded up a program i used a while back to convert video files to mp4 off my video camera and sure enough bd iso conversion to dvd is available. I was using this program years ago before the bluray or the video conversion option was available to the fab line up. I am currently at 17% and still going. There is obviously a glitch or a lag somewhere between the video card and dvdfab. I will try more setting configurations. not sure what else to try but i will not give up on my fab though.

[CBR929]

Sorry I could not be of more help.
CBR929

[ripvanwinkle1819]

Sorry I could not be of more help.
CBR929

Hey NP its all part of the fun I will try some more and post my updates.


thanks CBR929 regards rip

[ripvanwinkle1819]

After spending some time on the problem I have come to the conclusion that the limitations of my cpu are the issue that is causing the crashes. I say this because the other converting software I have used has a function that allows you to lower your cpu speed. Thus no overheating. Can we add this to dvd fab? If the cpu speed is lowered I don't crash.



regards rip

[CBR929]

Hi ripvanwinkle1819
You can disable turbo CPU in Fab settings.
Open Fab click the gear cog top right, conversion, convert, uncheck turbo CPU and give it a try.
I had a feeling you were overheating but, you said that it was Cool as Ice
CBR929

[ripvanwinkle1819]

I tried different setting changes and tried a few I had read about from other posts. Don't take me wrong I still am a diehard for my fab but I believe it is not a software issue but a limitation with my laptop. I use my laptop because it is the only bluray reader I have. When I say slowing down my cpu it takes roughly 4 hours to convert a bluray iso to a dvd 9. I am not sure but disabling the the cpu may not be slow enough. I curse my new media player because that is what started this little adventure.

[CBR929]

Hi ripvanwinkle1819
If using a media player, why not use the ripper function?
This will still heat up your laptop though.
CBR929