Drive just constantly flashes

[The_Tango]

I'm trying to make an ISO of a dance DVD from South America - The problem is the dvd drive just constantly flashes. DVDfab never mounts the drive. This is the only disc that causes this - not a drive problem.

The same thing happens with other program. Yes the disc will play in a standalone DVD player. I have the latest version.

Any ideas?

[CBR929]

Hi The_Tango
Try disabling Path Player to do this Open Fab Click the Green √ top right > Protection > Path Player click Disable Path Player click OK restart Fab and try again, just remember to set it back to Always Enabled.

If this does not work please do as posted here
CBR929

[signals]

If the disc still will not open, click on the green checkmark again (with the disc int he drive). The Info page will open. Click on the button that says Send Info files. A box will open to let you send the IFO files and other info to the developers. The box may be underneath the DVDFab window, check there if you don't see it. A live internet connection is required.

[The_Tango]

I had already tried turning Path Player off - No effect.

With no disc in drive:
Info for drive [E:\] (DVDFab 8.0.7.3)
Vendor: TSSTcorp
Product: CDDVDW SH-S223Q
Revision: SB03
Vendor specific: 1219
Drive region control: RPC II
Drive region: 1
User changes left: 4
Vendor resets left: 4
No disc in drive.

With problem disc in drive:
Info for drive [E:\] (DVDFab 8.0.7.3)
Vendor:
Product:
Revision:
Vendor specific:
No disc in drive.

If I put the disc in the drive, then start DVDFab - The program shows up in Task Manager but never starts up.

If I start DVDFab first, the program comes up - then insert the problem disc. The program never mounts the drive. Just constant flashing. This accessing of the drive will pretty much lock up the PC until I reject the disc.

[sunny]

Please install Imgburn at http://www.imgburn.com/index.php?act=download, then "Creat image file from disc " to see the result.

[The_Tango]

After about 5 minutes I get in the right side pane:

TSSTcorp CDDVDW SH-S223Q SB03 (ATA)
Current Profile: DVD-R

Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 2,262,544
Size: 4,633,690,112 bytes
Time: 502:49:19 (MM:SS:FF)

TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 2262543)
-> LeadOut (LBA: 2262544)

Pre-recorded Information:
Manufacturer ID: TYG03

Physical Format Information (Last Recorded):
Disc ID: 0@P-!-00
Book Type: DVD-R
Part Version: 5
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,459,151
Last Physical Sector in Layer 0: 0

In the Log window:
I 11:54:14 ImgBurn Version 2.5.5.0 started!
I 11:54:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 11:54:14 Total Physical Memory: 2,095,920 KB - Available: 1,438,368 KB
W 11:54:14 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 11:54:14 Initialising SPTI...
I 11:54:14 Searching for SCSI / ATAPI devices...
I 11:54:14 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S223Q SB03 (E (ATA)
I 11:54:14 Found 1 DVD±RW/RAM!


But the Disc to Image button stays grayed out.

[sunny]

Please visit

http://forum.imgburn.com/index.php?showtopic=6379

to get the step-by-step guides.

[The_Tango]

I have used ImgBurn for several years - The problem is no software I have tried sees the disc.

DVDFab, AnyDVD, ImgBurn, DVDShrink, ect.