Problem After Updating - On 2 Machines

[Fred_S]

On two different machines, DVDFab v9.1.2.5 failed after reading the full DVD. Is this a known issue?

Here's my the log:

DVDFab 9.1.2.5 (2014/02/02 16:49:03)

0m 00.50s: App info: 2014-1-22
0m 00.52s: App info: 9.1.2.5 9125 Official
0m 00.55s: App info: client type 2.
0m 00.59s: Fabplay load: preload successful.
0m 00.67s: Fabplay load: Load successful.
0m 00.69s: Init process: Transfer settings successful.
0m 00.71s: info: fabcheck logpath= D:/My Documents/DVDFab/Log/
0m 00.76s: fab_check_gpu is running ...
0m 01.12s: fab_check_gpu run successful
0m 01.15s: info: recommand= 8248, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 01.17s: GPU check: GPUAccelerate-12351
0m 01.19s: GPU check: GPUAccelerate setting-8248, 8248
0m 01.21s: GPU check: CUDA cap-1
0m 01.24s: GPU check: Support coreavc decode-0
0m 01.26s: GPU check: Lighting shrink status-1, 1
0m 01.29s: GPU check: Graphics info: NVIDIA GeForce GTX 550 Ti : 5.50 : 2.1
0m 01.31s: Init process: Load config successful.
0m 01.35s: Init process: Windows os type is 14.
0m 01.36s: Init process: command line in is
0m 01.45s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 1:0 )( OV:9125 )( BV:9123 )( S:bbf1184ae9e401051c2911e29cc2bd0a )
0m 01.47s: Reg check: Option check status-Local
0m 01.48s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 01.50s: App info: language type ENU.
0m 01.53s: Reg check: Start get sys number.
0m 01.55s: Reg check: Serial number is: 00-ff-38-ab-c3-72:00-24-8c-a6-fa-fd
0m 01.58s: Reg check: Connect type is: 0
0m 01.60s: Init process: Init GPU settings successful.
0m 01.93s: Init preview: Begin init preview play engine.
0m 01.97s: Profile Manager :: End Load Profile
0m 02.32s: Reg check: Times of connecting error is: 0
0m 02.33s: Init preview: Init internal engine successful.
0m 02.35s: Reg check: Parse string: ( S:1cc96e37d8189b8c914de3f2f69cd119
0m 02.41s: Reg check: Option check status-NewWork
0m 02.94s: Burn engine: start init.
0m 03.15s: Burn engine: engine type-0.
0m 03.17s: Burn engine: writer count 2.
0m 03.20s: Burn engine: 0- F:\ [PIONEER BD-RW BDR-207M 1.21 (Scsi)].
0m 03.21s: Burn engine: 1- G:\ [hp BD-RE BH20L B57C (Scsi)].
0m 03.24s: Burn engine: end init.
0m 04.22s: Init process: Init setting page successful.
0m 04.62s: UI manager: switch to Ripper mode.
0m 05.50s: Init process: init main ui successful.
0m 05.83s: Init process: show main ui successful.
0m 05.87s: DriveX msg: Init driveX F with I/O mode: 0
0m 05.90s: DriveX msg: Init driveX G with I/O mode: 0
0m 06.01s: opening drive G
0m 06.10s: opened i/o
0m 06.12s: got media type 5
0m 06.15s: got max lba 0
0m 06.18s: DriveX msg: media open(false) failed in driveX G.
0m 08.26s: opening drive F
0m 08.32s: opened i/o
0m 16.32s: Exit process: stop running.
0m 16.35s: Exit process: preview pfn_releaseplayer end
0m 16.39s: Exit process: preview pfn_deinit end
0m 16.43s: Exit process: preview FreeLibrary end

[Dora]

Hi, Fred_S
Sorry for late respond.
Which version are you update from? How about a clean install?
I have no this issue. Try to change the pathplayer setting.

[CBR929]

Hi Fred_S
Your Pioneer drive has a firmware update, you will find it here http://www.firmwarehq.com/Pioneer/BDR-207M/files.html

NOTE: If you do not know how to flash your drive do not do it, it will render your drive useless if done wrong.
Hope this helps
CBR929

[Fred_S]

Hi Fred_S
Your Pioneer drive has a firmware update, you will find it here http://www.firmwarehq.com/Pioneer/BDR-207M/files.html

Good to know but since it happened on more than one machine (with different drives) I doubt it will help my situation.

[signals]

Fred
Your log seems incomplete,and it says you changed from Copy to Ripper sometime during the process. Please restart DVDFab and let it try to open the same disc and repost the new log file, thanks.

[CBR929]

Good to know but since it happened on more than one machine (with different drives) I doubt it will help my situation.

Hi Fred_S
Sorry missed that
It may also help if we know the name of the movie being copied.
The log from the other machine might help too.
CBR929