RE: Issues Copying DVDs(Technical Support)

[nupie14]

Technical problem:copy_problem
Operating System:Windows 7
Software Version:9.1.3.3
SoftwareVD to DVD
DVD Copy mode:Main Movie
Message:
Received the following error message while trying to copy DVDs: Failed to Burn DVD due to over sized source file. This occurred on "The Last Rites of Joe May" and "Detachment". Had no problems with "The Fowers of War".

[signals]

Nupie
You did everything perfectly with the exception of failing to include the DVDFab internal log, please attach that to a new post. Check your DVDFab settings to make sure you have the output size set to DVD5 if using single layer blanks and that the DVD-5 size is set to 4300 MB if receiving the oversize warning.

[nupie14]

Technical problem:copy_problem

Technical problem:copy_problem
Operating System:Windows 7
Software Version:9.1.3.3
SoftwareVD to DVD
DVD Copy mode:Main Movie
Message:
Received the following error message while trying to copy DVDs: Failed to Burn DVD due to over sized source file. This occurred on "The Last Rites of Joe May" and "Detachment". Had no problems with "The Fowers of War".

I attached the log file.

[CBR929]

Hi nupie14
I have merged your thread with your previous one, please do not start more that one thread on the same subject.
Thanks
CBR929

Edit: Please check your settings in Fab that signals suggested.

[CBR929]

Hi nupie14
You also need to slow down your burn speed with these discs your using, the recommended is 1/2 the rated speed of your disc, which in this case is 8x.

Make sure that you have ImgBurns AWS set up correctly using the link in my signature.

For the errors I see in your ImgBurn log
Waiting for buffers to recover...
Waiting for hard disk activity to reach threshold level...

Open ImgBurn > tools > settings, under Build page 2 (read buffer size), set it to 200, also I/O page 2 (buffer size) set this to 200, click OK.
CBR929

[nupie14]

Thanks to all of you. Working like a champ now.

[CBR929]

Glad to help!!!
CBR929