will.reed disk

[brasstownjim]

I purchased DVD Fab however when I try to copy discs it just hangs and nothing happens is not reading the disk in the drive. I am attaching the log files because I have now current but still the program is not reading the disk and I don't know why I tried two different discs.

[signals]

Are the discs in the Plextor drive? Can the operating system see them and open them (from My Computer)?

[brasstownjim]

actually no the default drive is E drive which was not been seen and listed as a removable when it is an internal drive and Windows update was running which tends to tie up things I tried it all today on a fresh reboot and is working okay now not sure why the drive isn't being seen by Explorer

[signals]

That is unusual, for sure. Possibly a conflict with some other software?

[90312]

It's an internal drive then? If so and none of the above helps just go into device manager and uninstall the drive there Windows will (or should) pick it up and install on reboot.

[Jimbo]

It's an internal drive then? If so and none of the above helps just go into device manager and uninstall the drive there Windows will (or should) pick it up and install on reboot.

Best way to do it

[brasstownjim]

well I spoke too soon I logged on this morning and Windows Explorer. See the drive and the disk in the drive but DVD Fab did not I'm going to try uninstalling the E Dr. and see what happens I don't know one day it works the next day it doesn't work

[glenns]

If windows see's the drive check Fab settings and make sure your drives are checked marked in the Fab program like screenshot.Here's a little something from your online manual for the plextor drive;

Troubleshooting
If you have problems during or right after installation of your drive, first
make sure the drive is recognized. If you still have problems, visit the
Plextor web site for tips and troubleshooting help.
Make Sure the Drive Is Recognized
If you’re having trouble after installation, make sure the PX-B310U or
PX-B310SA drive is recognized by your computer. To check whether
the drive is recognized:
To see if the drive is recognized in Windows:
1. Turn the computer ON. After the computer boots up, you should see
the Windows display.
2. Open Windows Explorer or My Computer and ensure there is an
icon for the Plextor drive, the hard disk, and another DVD or CDROM
drive, if present. The Plextor icon may be D: or E: or another
designator.
3. If the PX-B310U or PX-B310SA drive is not recognized in
Windows, reboot the computer and use your computer’s setup
program to program the BIOS to recognize it.
NOTE: Refer to the computer’s documentation for information on how
to run the motherboard BIOS setup program.
 For the PX-B310U, verify the USB connection and
compatibility.
 For the PX-B310SA, verify the SATA chipset supports the
ATAPI Command set. Use your computer’s motherboard BIOS
setup program to enable SATA/IDE/ATAPI as needed for your
configuration.
Note that if your computer’s SATA chipset is dedicated for SATA
RAID, the connection may not support optical disc drives like the
PX-B310SA. Consult your motherboard manual or vendor website
for assistance in configuration or for questions of compatibility.

[terrybrown23]

having problem with Tyler Perry play Neighbors from hell

It will not get pass the analyze stage of the process can anyone help me please

[glenns]

terrybrown23:You should open your own topic in the blu ray or dvd section and post your internal log file for the disk your having trouble with.Make sure your using the latest version of Fab 9141 first.