v8.1.5.9 freezes at .58%

[lordjackel]

Hi Everyone...sorry my first post is to scream for Help...but the previous version worked fine now "Ripper" stops at 0.58%. I have tried 3 different DVD's directly and 2 ISO files and all do the same thing. Until the upgrade everything worked as it should.

I see in other posts people posting their log files - I have no idea where to find these if they are needed?

Thoughts?

Thanks!!

[signals]

We must have the DVDFab internal log to be able to help you. Its location varies with your OS version, so just use the search or find files and folders function in windows explorer to find the file dvdfab_internal.log. You can open it with Notepad, locate the relevant log session, and copy and paste it into a post. The most recent logs will be towards the end of the file.

[lordjackel]

Here are the most recent logs. (The "cancel all mobile work" was me manually stopping the process after it hung at 0.58%)

Thanks for any guidance!!

------ begin mobile work(1/1) ------


0m 00.50s: info: create config(0)
0m 00.50s: info: convert profile(PlayStation 3)
0m 00.50s: info: dvd playlist(1),angle(0),chapter(1->11),3D(0)
0m 00.51s: info: streams((480.2)(128.2))
0m 00.89s: info: not set correct fourcc for video(28)
0m 00.90s: info: set output video frame_rate(30/1)
0m 02.56s: GPU acceleration for video encoding enabled
0m 03.90s: info: h264_encode: encode param profile(2) level(41) bitrate(1835)
0m 12.47s: ------ cancel all mobile work -------
0m 47.63s: detected dvd
0m 47.69s: drive D
0m 47.70s: dvd type 1
0m 47.70s: volume label IN_THE_NAME_OF_THE_KING_2
0m 47.89s: got copyright 1 fe
0m 48.84s: got udf/iso
0m 50.49s: got discinfo
0m 50.51s: pathplayer enabled
0m 18.64s: got dvdinfo
0m 18.83s: opened dvd
0m 44.29s:


------ begin mobile work(1/1) ------


0m 44.29s: info: create config(0)
0m 44.29s: info: convert profile(PlayStation 3)
0m 44.30s: info: dvd playlist(1),angle(0),chapter(1->25),3D(0)
0m 44.30s: info: streams((480.2)(128.2))
0m 44.57s: info: not set correct fourcc for video(28)
0m 44.58s: info: set output video frame_rate(30/1)
0m 46.18s: GPU acceleration for video encoding enabled
0m 48.10s: info: h264_encode: encode param profile(2) level(41) bitrate(1736)
0m 07.41s: ------ cancel all mobile work -------

[CBR929]

Hi lordjackel
Open Fab click the Click the Green √ at top right corner of the DVD Fab screen, and open Common Settings > General >A/V Codec, put a check in Disable all GPU codes and make sure they are set to Software, restart Fab and try again.
CBR929

[lordjackel]

Thank you! I followed the above instructions and it got passed the 0.85% but now it is stuck at 86.82% (for the past 2 hours)...here are the new log files. Next ideas?? This is odd since the previous version had zero issues...the only changes has been the upgrade. Thanks again for everyone's help!!

DVDFab 8.1.5.9 (2012/01/26 16:37:59)

0m 02.57s: Qt Translator file load success
0m 02.66s: Load config successful.
0m 02.74s: Init profile data driver sucessful.
0m 04.85s: Init GPU settings sucessful.
0m 04.85s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.86s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.10s: Config ExBar successful.
0m 05.10s: dvd2dvd have 8 elements.
0m 05.23s: dvd2mobile have 28 elements.
0m 05.83s: blu-ray2blu-ray have 4 elements.
0m 05.86s: blu-ray2mobile have 17 elements.
0m 06.21s: blu-ray23d have 7 elements.
0m 06.34s: blu-ray2dvd have 1 elements.
0m 06.36s: file2mobile have 27 elements.
0m 06.95s: file2dvd have 1 elements.
0m 06.97s: file2bluray have 1 elements.
0m 07.25s: Config work ui controls successful.
0m 08.66s: Init burn engine successful.
0m 08.84s: StartNotify successful.


DVDFab 8.1.5.9 (2012/01/26 16:39:17)

0m 01.91s: Qt Translator file load success
0m 01.97s: Load config successful.
0m 01.97s: Init profile data driver sucessful.
0m 03.95s: Init GPU settings sucessful.
0m 03.95s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 03.97s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.13s: Config ExBar successful.
0m 04.14s: dvd2dvd have 8 elements.
0m 04.26s: dvd2mobile have 28 elements.
0m 04.86s: blu-ray2blu-ray have 4 elements.
0m 04.88s: blu-ray2mobile have 17 elements.
0m 05.25s: blu-ray23d have 7 elements.
0m 05.37s: blu-ray2dvd have 1 elements.
0m 05.40s: file2mobile have 27 elements.
0m 05.98s: file2dvd have 1 elements.
0m 06.00s: file2bluray have 1 elements.
0m 06.28s: Config work ui controls successful.
0m 06.35s: Init burn engine successful.
0m 06.39s: StartNotify successful.
0m 25.29s: pathplayer enabled
0m 43.63s:


------ begin mobile work(1/1) ------


0m 43.64s: info: create config(0)
0m 43.64s: info: convert profile(PlayStation 3)
0m 43.65s: info: dvd playlist(1),angle(0),chapter(1->25),3D(0)
0m 43.65s: info: streams((480.2)(128.2))
0m 43.65s: info: not set correct fourcc for video(28)
0m 43.66s: info: set output video frame_rate(30/1)
0m 47.75s: info: h264_encode: encode param profile(2) level(41) bitrate(1736)
0m 31.24s: info: h264_encode: encode param profile(2) level(41) bitrate(1736)

[90312]

Try version 8.0.8.5, check the link for location.

[signals]

Moving your thread to the correct forum.

[terry5]

Hi lordjackel,
Please try the profile "PlayStation 3 VOB Passthrough" and then tell us the result.

[lordjackel]

Try version 8.0.8.5, check the link for location.

I did this and it worked...though the image quality isn't good.

[lordjackel]

Hi lordjackel,
Please try the profile "PlayStation 3 VOB Passthrough" and then tell us the result.

I will try and this now and get back to you! Thanks for the idea.