X-Men First Class BD+ protction gen 9

[ilce]

Same issue here. Over 3 weeks now since thew issue was reported. Any report on progress would be appreciated.

[Dave 2]

I have already copied this movie to file with 8.1.3.3. no problem, check your video card firmeware updates

[cko_au]

I have already copied this movie to file with 8.0.3.3. no problem, check your video card firmeware updates

Are you copying the dvd or blu-ray version? I have the region B blu-ray version, version 8.1.3.2 with lifetime license dvdfab. Updated video card drivers and firmware for my burner, and it won't copy. I seems that the region b blu-ray version cannot be copied at the moment. (I've been waiting for 4 weeks for this to be fixed).

[notvalid]

Xmen First Class region B still has not been able to backup with DVDFAB. Its not anyones hardware or settings -- its DVDFAB hasnt a key for it. I wish someone from DVDFAB would give us an update if it can be or will be done. I hope this is not going to happen on a regular basis or that it is becoming harder for DVDFAB to get the keys---bottom line its not anyones system--its just theres no key for it from DVDFAB

[ilce]

5 weeks now with no solution?

Pretty much exactly the same as all the others but here you go

DVDFab 8.1.3.2 (2011/11/23 11:10:30)

0m 00.88s: Qt Translator file load success
0m 01.57s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 0 bd23d 1 bd2dvd 1 file2mobile 1 filemover 0
0m 04.93s: detected blu-ray
0m 04.93s: drive D
0m 04.93s: blu-ray type 1
0m 04.93s: volume label XMEN_FIRST_CLASS
0m 05.52s: aacs 1 bd+ 1
0m 13.05s: got discinfo
0m 13.27s: got bdmv
0m 13.27s: Vendor: HL-DT-ST
0m 13.27s: Product: BD-RE BH10LS30
0m 13.27s: Revision: 1.00
0m 13.27s: Vendor specific:
0m 13.27s: AACS version: 1
0m 13.29s: Number of concurrent AGIDs: 1
0m 13.29s: Supports bus encryption: NO
0m 13.29s: Supports binding nonce generation: YES
0m 13.29s: Supports Hybrid discs: NO
0m 13.29s: got agid 0
0m 13.30s: sent host cert chal
0m 13.30s: got drive cert chal
0m 13.30s: BEC 0
0m 13.30s: DRIVE_VENDOR 0x0116
0m 13.33s: got drive key
0m 13.63s: got host key signature
0m 13.63s: verified drive signature
0m 13.65s: verified host signature
0m 13.68s: sent host signature and key point
0m 13.68s: got bus key
0m 13.69s: got agid 0
0m 13.71s: sent host cert chal
0m 13.71s: got drive cert chal
0m 13.71s: BEC 0
0m 13.71s: DRIVE_VENDOR 0x0116
0m 13.74s: got drive key
0m 13.74s: got host key signature
0m 13.74s: verified drive signature
0m 13.74s: verified host signature
0m 13.77s: sent host signature and key point
0m 13.77s: got bus key
0m 13.77s: got volume id
0m 13.77s: got volume id mac
0m 13.79s: volume id is correct
0m 13.79s: got vid
0m 13.88s: blu-ray 49AB6315C74B08EC9C0A734AAD4A0345ED7BC540
0m 14.38s: cert BEE=0x00 same
0m 18.01s: D 3D672F2E
0m 24.36s: bt R:5
0m 25.02s: bd+ generation 9
0m 25.02s: failed to open disc 303

[signals]

Thanks for the info. In addition to the logs (which some of you did not supply) the developers also need the region and country of the disc. They are monitoring this thread and will bring you a solution ASAP.

[selze]

Region B - Australia doesn't work. Thanks.

[cko_au]

Thanks for the info. In addition to the logs (which some of you did not supply) the developers also need the region and country of the disc. They are monitoring this thread and will bring you a solution ASAP.

Signals, just to let you know, it is the Region B disc that people are having problems with. As for the country, i didn't think that it mattered, as long as you had the region the disc was encoded for. To help you out, I have the Region B disc and live in Australia. I have also included my logs for you as well.

DVDFab 8.1.3.2 (2011/11/25 12:34:18)

0m 02.60s: Qt Translator file load success
0m 03.29s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 38.62s: detected blu-ray
0m 38.62s: drive G
0m 38.62s: blu-ray type 1
0m 38.62s: volume label XMEN_FIRST_CLASS
0m 41.02s: aacs 1 bd+ 1
0m 49.31s: got discinfo
0m 49.88s: got bdmv
0m 49.92s: Vendor: PIONEER
0m 49.92s: Product: BD-RW BDR-206
0m 49.92s: Revision: 1.06
0m 49.92s: Vendor specific: 11/04/18 PIONEER
0m 49.93s: AACS version: 1
0m 49.93s: Number of concurrent AGIDs: 1
0m 49.93s: Supports bus encryption: NO
0m 49.93s: Supports binding nonce generation: YES
0m 49.93s: Supports Hybrid discs: NO
0m 49.95s: got agid 0
0m 50.02s: sent host cert chal
0m 50.02s: got drive cert chal
0m 50.02s: BEC 0
0m 50.02s: DRIVE_VENDOR 0x0103
0m 50.09s: got drive key
0m 50.79s: got host key signature
0m 50.79s: verified drive signature
0m 50.79s: verified host signature
0m 50.85s: sent host signature and key point
0m 50.85s: got bus key
0m 50.88s: got agid 0
0m 50.96s: sent host cert chal
0m 50.98s: got drive cert chal
0m 50.98s: BEC 0
0m 50.98s: DRIVE_VENDOR 0x0103
0m 51.04s: got drive key
0m 51.04s: got host key signature
0m 51.04s: verified drive signature
0m 51.04s: verified host signature
0m 51.10s: sent host signature and key point
0m 51.10s: got bus key
0m 51.44s: got volume id
0m 51.44s: got volume id mac
0m 51.44s: volume id is correct
0m 51.44s: got vid
0m 51.60s: blu-ray 49AB6315C74B08EC9C0A734AAD4A0345ED7BC540
0m 52.07s: cert BEE=0x00 same
0m 56.09s: D 3D672F2E
1m 00.12s: bt R:5
1m 00.76s: bd+ generation 9
1m 00.77s: failed to open disc 303

[squitzad]

Region B Sweden not working!

[notvalid]

just tried region B australia and now works fine.Thanks guys for fixing this

[j&b]

Signals, just to let you know, it is the Region B disc that people are having problems with. As for the country, i didn't think that it mattered, as long as you had the region the disc was encoded for. To help you out, I have the Region B disc and live in Australia. I have also included my logs for you as well.

You know... studios don't just release 3 discs in the world, an A, a B and a C
There can be several configurations out there, especially Europe is tricky with lots of audio tracks in all those languages. Due to space constraints they need to make at least 3-4 audio configurations (eg. a disc with French/German, one with Italian/Spanish/Portuguese, one with Polish/Russian/Czech, etc, etc).
So, at times, it will not suffice to say I have a region B disc that does not work, it may just be 1 out of 3-4 that does not work and it's the exact one distributed in your area and affecting you. Obviously people in other 2-3 discs areas won't complain and won't go to the forum to see this thread and tell you: hey, my B disc works. Anyway, it would be even more confusing if they did, isn't it? That's why moderators and developers will ask sometimes a bit more information from you... and thank you for providing it

Btw: if the studio is doing a combo release (BD/DVD), they cannot distribute the same mix in UK and Australia, for instance, because of the DVD region which is different. Of course, they could just swap the dvd disc with the right region, but then it will not help them when trying to confuse you why other B disc blu-ray works I mean they went that far to add the BD+ protection to the disc, it's just a matter of how much the care about that movie to make two or more different BD+ protection for same language configurations. If you look back in the thread, you'll find that they released in US two discs with same languages but different BD+ protections.

[cko_au]

You know... studios don't just release 3 discs in the world, an A, a B and a C
There can be several configurations out there, especially Europe is tricky with lots of audio tracks in all those languages. Due to space constraints they need to make at least 3-4 audio configurations (eg. a disc with French/German, one with Italian/Spanish/Portuguese, one with Polish/Russian/Czech, etc, etc).

Thanks for that... didn't realize, just started to rip blu-rays.

[signals]

Glad to hear the Oz version is working, need an update from squitzad on the Svenska.

just tried region B australia and now works fine.Thanks guys for fixing this

[tangerinemonkey]

just to confirm that the Region 2 UK version is working fine. All Copied and Ripped fine, no problems.

[squitzad]

Sorry for the late reply!

The Swedish region B version now works perfectly...thank you!